SSO and entirely virtual Envorinment

Similar Questions

• My XP PC is slow and says virtual memory is low while playing facebook games

  Original title: My XP PC is slow and says virtual memory is low

  When I try and play facebook games pc freezes and error comes up saying virtual memory is low, the pc is very slow

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. This only happens with the games on facebook?
  4. what browser do you use?

  Try the steps and check them off below.

  1. Click Start, right click my computer and then click Properties.
  2. in the System Properties dialog box, click the Advanced tab.
  3. in the results pane, click settings.
  4. in the performance Options dialog box, click the Advanced tab.
  5. in the virtual memory section, click on change.
  6. change the value of initial size and maximum size to a higher value value, click on set and then click OK.
  7. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  See the articles to optimize your computer for optimal performance.
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Disk and the virtual disk drive records corrupted (code 19)

  I recently had a virus and it corrupted my drive and drive virtual and perhaps deleted records. I tried all methods on the site of Microsoft Support here and not to have borne fruit. I uninstalled the drivers and quite well done all recommended from the page (except run a fix because it cannot find the driver). I also added new keys in regedit and it has not fixed either. Is it possible to replace records that have been corrupted, or missing, or I'll have to do a wipe or something to fix? Thank you.

  Sorry, I don't really know what to do; I guess if you need a tool for editing with screenshots I can do.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

  As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

  I have solved my problem by trying everything that moves. Here are my steps:
  -Open Virtual PC and minimize it
  -In the Windows 7 machine, click Start click all programs
  -Select Windows Virtual PC
  -Select Windows Virtual PC (in the drop-down list)
  -When the window opens, right-click on Windows XP Mode
  -Select share >
  -Select the homegroup (read/write)

  -Minimized open Virtual PC
  -Select my computer
  Windows 7 disks will be under other

  I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

  Even a blind squirrel finds an Acorn once in a while!

• Windows XP mode and Windows Virtual PC

  My old system crashed (looked like 15 years in any case lol) and a low-cost system now has the SATA card and readers, but my old HD is ok. My new system is installed with Windows 7 Ultimate, but my old HD has WinXP with all my music, games and other software. I'll get the IDE to SATA Adapter block, but in any case, here's my question... I want to reuse my old IDE hd with all my files from WinXP on it and I did a reading in this Windows XP Mode and Windows Virtual PC and I would like to know if someone is using this download mode of Windows XP to Windows 7 and what questions have known and if it is worth, but for me it would be worth cause I had some problems with my (x 86) software from the re - install it on my Windows more recent system 7 and Win7 is a big update for me and my new system only cost me about the same price it would just go out and buy Windows 7 Ultimate lol.  The experiences and knowledge of Windows XP mode on Windows 7 would be helpful thanks in advance...

  Hi RussBrad,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you want to know if you can run Windows XP mode without any problem in the Windows 7 system.

  Windows XP Mode lets you run business software Windows XP older right on your Windows 7 desktop.

  Windows XP Mode comes as a separate download and works only with Windows 7 Professional, full and business.

  Windows XP Mode performance depends on the configuration of the computer.

  Since you are using Windows 7 Ultimate edition, you will be able to install and use Windows XP mode without any problem.

  For more information, see the articles:

  Windows XP Mode

  Install and use Windows XP Mode in Windows 7

  Hope the information is useful.

  If you need further assistance, please answer and we will be happy to help you.

• vRO 7 assign a workflow to change in a plan of action and its virtual machine

  Setting up the environment

  1 vRealize Automation 7.0

  2 vRealize Orchestrator 7.0 that comes with the vRA

  Action plan and configuration of custom workflow

  1 has created a plan of action that the provisions of a Windows Server VM

  • Action plan has already been published
  • Pu VM provisioned to the catalogue of services without any problem

  2. has created a workflow customized to update the properties of the configured virtual computer

  When I try to run the "assign a workflow to change in a plan of action and its virtual machine", I was not able to choose the model that I created at vRA.

  Anyone has the same problem and how we can solve this?

  Thank you!

  vRA 7 no longer uses the entitled it a state change. All happened to event broker now.

  If you want a walk through the check-out this blog post.

  The activation of the event Broker

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• Illustrator keeps crashing and is virtually unusable (Mac, Yosemite). Do I have to reinstall my CC 2015 Adobe educational software, and if so, how can I do this? Thank you.

  Illustrator keeps crashing and is virtually unusable (I'm on a Mac, Yosemite)...

  I read several forum other messages that address the same issue and the Council is mainly to "reinstall the software."

  However, I tried to do and it doesn't seem to be an option to reinstall when my account management. I also tried once again, the redemption code to reset, but it tells me that I am already logged under that number, so I'm stuck. Don't know what to do at this point, thank you.

  I found another thread that said changing the display processor instead of GPU and contributing to the issue that is. I would rather not reinstall the software at this time.

• How to connect 2 physical computers and 2 virtual machines?

  Hello!

  This is my first time in the forum and I would like to ask about the network configuration for an installation of 2 physical machines and 2 virtual machines. Each physical computer has a virtual machine (all operating systems is Windows 7 or 8). I don't have a level of advanced network management, but I would like to ask how to resolve a case of example of this configuration? I was wondering for communication between machines and communication examining between 1 machine with the other 3.

  Thanks in advance! If someone has already asked this, please tell me the reference.

  Welcome to the community,

  VMware Player offers 3 configuration settings, bridged, NAT as well under the name Host-Only network. Host-Only can be used if the virtual machine does not require a connection with the exception of the other virtual machines and the host network. NAT is typically used if the virtual machine requires network access, but didn't need to be accessible to the outside. In your case, the possibility of using is connected by a bridge, which will connect seamlessly the virtual machine to the physical network.

  André

• VCenter Mgmt and calculation with single SSO and related modes?

  I am a great vCAC environment design and want to separate not only Mgmt/Compute clusters, but also of the vCenters.   I want to be able to manage these inLinkedMode vCenter.  My plan is to have 2 vCenter VM and VM Web/asingleSSO.    When you install the two vCenters, I've just direct them to the server shared Web SSO, and then enableLinkedMode?

  Will this work?  Something else I'm missing?  AsingleWeb server instance will be able to manage multiple vCenters?

  Thank you

  -MattG

  Hello, MattG.

  Yes, you can use 1 SS and 1 service WebClient for "single-pane-of-view" for 2 vCenters, I did the same thing recently, and you need not related modes. Just point your SSO and Web when installing two vCenters. But in this case, you can manage both of them single point in the Web Client, no thick vSphere client. If you need to manage two of them only heavy customer too, then you should make the related modes, but in this case as far as I know, you must also install multi-site SSO, not simple SSO node. I use the first schema.

  Sorry for my bad English.

• USB HDD as a data store and storage of VMS and new virtual machines

  I have a server Esxi 4.1 with 1 TB RAID 5 storage and 3 virtual machines. The storage is full and no space for another HARD disk, so my question is: would it be possible to use a USB HDD as a data store and could be included as a storage for new virtual machines or the VM? If so, could someone let me know how to do it because I'm not able to detect the HARD disk on the host itself.

  No, it is not possible to use a USB drive as a data store.

  Linjo

• Start and stop Virtual Machines with the system

  Hello

  In a server cluster @vcenter HA/DRS 5.1, I enabled start and stop virtual machines with the system option but after I checked two days later, he is off again somehow. What makes this option off? I had a power failure in the datacenter. vCenter server has not been upward. I started all of the ESXi servers manually then went all VMs account is declining. I want that they start automatically when server ESXi upward.

  Thanks in advance,

  Thank you. This option is more valid than if the hosts are part of an HA Cluster license. I suspect that you configured through the traditional vSphere Client and that it is a bug with this client. If you try with the new vSphere Web Client, you will find a notice that it is disabled and there is no button "Edit".

  Concerning

• Newbie - run same app on Mac and Windows virtual merger

  I have a number of applications that I need to operate in the two (10.8.2) OSX and my virtual Windows machine (Windows 7, Fusion 5.0.2).  After I installed the application on the windows machine, my app on the mac has been replaced by a link to the virtual machine, and I can't run in the mac environment more - it always starts just my virtual machine.  This is the case for Acrobat (I have a full version for mac, I used to run, but after installing a version full of windows on my windows machine, when I click the icon in the applications folder, it starts my virtual machine, and I can't my mac version) and also for Java (I can no longer go and configure the java on my mac preferences when I go into the applications folder and click on java It starts my virtual machine).

  Hi rji3,

  Plase, try the following steps, which I think might help.

  1. Select your VM Virtual Machine library and select "settings".

  2. click on the button "default application".

  3 uncheck "Open your Mac files and web links to Windows applications using"

  4. re-start the merger.

  I hope that these steps can help.

• do not start to vCenter / problem with sso and ad

  Hello

  My vcenter will not start. in the error logs, I found the following errors...

  I changed the server vcenter 5.1 to 5.1 and I insert the vcenter to my Active directroy. I uninstalled sso and installed again the backup file leave 5.1.

  After the updates, I used vmware article because I changed the ad domain:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2036170

  but now it does not start. How can I manually set the uri of the admin? I think it will be the problem:

  2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI the value:
  2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] certificates [OSP] [SessionManagerMo::Init] download m root...
  2012 11-22 T 14: 53:08.576 + 01:00 [error 01808 "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000a1c48c0, TCP::80 >;
  CNX: (null), error: class Vmacore::SystemException (konnte keine connection available werden, die Zielcomputer der da verweigerte connection.)
  2012 11-22 T 14: 53:08.655 + 01:00 [error 04720 "[OSP] [SsoCertificateManagerImpl]"] [CreateAdminSsoServiceContent] failure when attempting
  to connect to the SSO Admin Server: konnte keine connection available werden, die Zielcomputer der da verweigerte connection.  . Retrying in 10 seconds.
  2012 11-22 T 14: 53:16.332 + 01:00 [02512 WARNING opID "VpxProfiler" SWI-6f09bdcf =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12030
  2012 11-22 T 14: 53:19.073 + 01:00 [02212 info "Default"] detached thread

  Greetings,

  Markus

  It seems that the computer refuses the connection (connection refused so loosely translated from German).

  No firewall between the machines?

  Maybe try to reorient and re-register vCenter? http://KB.VMware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&LanguageID=&externalID=2033620

• create and deploy virtual computer

  Hi all

  I want to create a VM and deploy virtual computer by using ISO image. I need to automate this process using powercli.

  Could you please provide me with an example script to do this.

  Thank you

  Kalai

  You will need to change the boot order in the BIOS of the virtual machines to boot from the CD.

  Take a look at specify bootable for a virtual machine devices