SSO and IIS 7.5

Similar Questions

• You will need to upgrade the ASP to run on Windows server 2008 and IIS 7.0 application.

  I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.

  I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.

  The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.

  : "800a01ad" VBScript runtime error
  Component ActiveX cannot create object

  Code:

  Set OF = Server.CreateObject ("DERuntime.DERuntime")
  Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")

  The MSDERUN. DLL is properly registered on the server with the correct permissions.

  What are the possible solutions outside the upgrade of all of the ASP.net project. ?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• 500 internal Server Error on the server that is running Windows 2012 R2 and IIS 8.5

  Hello. We have a new server. On our old server, I used to get all debug information. Cold Fusion on my computer if something was wrong with a page of Cold Fusion. Now with the new server, all I get is a 500 internal server error. Is it because something is not properly configured on the server and debug information. Cold Fusion is not able to display? Anyone know what I should do to get Cold Fusion debugging information. to display? Here's what we all now:

  Our new server runs Windows Server R2 2012 and IIS 8.5

  ColdFusion Standard 11

  SQLEXPRESS 2008

  
  

  Thank you.

  Andy
  

  I have two settings enabled for my development environment, and it works for me. How about your IIS settings: you have detailed error messages that are enabled for local and remote applications?

• VCenter Mgmt and calculation with single SSO and related modes?

  I am a great vCAC environment design and want to separate not only Mgmt/Compute clusters, but also of the vCenters.   I want to be able to manage these inLinkedMode vCenter.  My plan is to have 2 vCenter VM and VM Web/asingleSSO.    When you install the two vCenters, I've just direct them to the server shared Web SSO, and then enableLinkedMode?

  Will this work?  Something else I'm missing?  AsingleWeb server instance will be able to manage multiple vCenters?

  Thank you

  -MattG

  Hello, MattG.

  Yes, you can use 1 SS and 1 service WebClient for "single-pane-of-view" for 2 vCenters, I did the same thing recently, and you need not related modes. Just point your SSO and Web when installing two vCenters. But in this case, you can manage both of them single point in the Web Client, no thick vSphere client. If you need to manage two of them only heavy customer too, then you should make the related modes, but in this case as far as I know, you must also install multi-site SSO, not simple SSO node. I use the first schema.

  Sorry for my bad English.

• do not start to vCenter / problem with sso and ad

  Hello

  My vcenter will not start. in the error logs, I found the following errors...

  I changed the server vcenter 5.1 to 5.1 and I insert the vcenter to my Active directroy. I uninstalled sso and installed again the backup file leave 5.1.

  After the updates, I used vmware article because I changed the ad domain:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2036170

  but now it does not start. How can I manually set the uri of the admin? I think it will be the problem:

  2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI the value:
  2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] certificates [OSP] [SessionManagerMo::Init] download m root...
  2012 11-22 T 14: 53:08.576 + 01:00 [error 01808 "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000a1c48c0, TCP::80 >;
  CNX: (null), error: class Vmacore::SystemException (konnte keine connection available werden, die Zielcomputer der da verweigerte connection.)
  2012 11-22 T 14: 53:08.655 + 01:00 [error 04720 "[OSP] [SsoCertificateManagerImpl]"] [CreateAdminSsoServiceContent] failure when attempting
  to connect to the SSO Admin Server: konnte keine connection available werden, die Zielcomputer der da verweigerte connection.  . Retrying in 10 seconds.
  2012 11-22 T 14: 53:16.332 + 01:00 [02512 WARNING opID "VpxProfiler" SWI-6f09bdcf =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12030
  2012 11-22 T 14: 53:19.073 + 01:00 [02212 info "Default"] detached thread

  Greetings,

  Markus

  It seems that the computer refuses the connection (connection refused so loosely translated from German).

  No firewall between the machines?

  Maybe try to reorient and re-register vCenter? http://KB.VMware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&LanguageID=&externalID=2033620

• Running apache and IIS on SBS: 403 permissions problem

  I'm trying to run Apache and IIS at the same time on Windows SBS. I can bring up the screen of Apache from a terminal, but I get the dreaded: 403 Access denied. I hunted around a solution, but without much luck. Thanks in advance for your suggestions.
  
  Mike

  Update: last night, I was up so late trying to modify the config file that I probably have something messed. I uninstalled the apache and re-installed and set the listening port on 8080. seems to work now!

  one thing I found odd: on the server I typed the ip address of the server: 8080 and he woudn't access apache... but it would be like a localhost.

  in any case his works now... evidence that just posting something on this forum gets results ;)

• Apache and IIS

  I am trying to install Apache on my win XP machine, so that I can use Msql, and PHP on a unix server.
  It will not install to teach Sam yourself CD, even on port 8080 with a manual start. Maybe it's because I have IIS running.
  Anyone has any idea if it is possible to have two servers installed, but only a performer?
  This it is, and I turn to Apache, localhost, IIS may be damaged in some way? Could then turn off the Apache and IIS under tension?
  

  Hello
  Of course, you can disable the IIS in Control Panel / administration / IIS, choice of web server and push the stop button, if you want to throw can push start button.
  in apache, there may be an ikon of plateau where you can easily stop and start the server,
  Titii
  http://textures.z7server.com/

• SSO and to handle user with forms using Oracle db roles/privileges

  By train from Oracle Application Server SSO with our application Forms application we are customized using the 10.2.0.1.0 Oracle database all version.
  
  In our Applications forms, we have everything a dozen roles that we have assigned to different users. We need identify each user using our forms because we are using the GLOBAL USER throughout the application.
  
  Issues related to the:
  -Must create users/passwords in the OID and database application?
  -Is it possible to easily manage users and passwords between SSO and forms App/database in one place? For example, how a user change their password once, but actually change in the database and the SSO?
  
  Advice or direction would be greatly appreciated.
  
  Thank you
  
  Mika
  
  Edited by: user11846198, 1 Sep 2009 13:41
  
  Edited by: user11846198, 1 Sep 2009 13:53

  Yes, you can have a global role in the Pb and assign to specific users from OID and the heritage of will this role privileges, you can do it by using Oracle Identity Management Web Tool http://hostname:7777 / oiddas is not complicated.

  Greetings.

• 2016 ColdFusion and IIS 8.5

  Hello

  I can't fix the below error while configuring IIS 8.5 for my ColdFusion 2016, please fix for the issue.

  Thank you in advance .

  

  Hello Aneesh,

  Could you please recreate the connector using the following procedure:

  1) go to the ColdFusion2016\cfusion\runtime\bin directory and run wsconfig as 'administrator '.

  (2) remove the connector for this site

  (3) add the connector

• Problems with vSphere 6.0 and IIS 8.5

  Hi all

  
  We have a very rare problem currently with IIS on a new version of vSphere 6.0.  We run 3 host ESX enterprise in a standard cluster with a standalone VCSA.

  The problems that we know are response times in IIS.  We lack an asp.net web application using ado.net to extract simple data sets in a cluster SQL from 2012.  The web server running Windows Server R2 with IIS 8.5.9600.16384 2012.  It comes to virtualized.  Our SQL servers are also running on Windows Server 2012 R2, but this is a physical cluster.  All components are updated running the latest windows patches, fixes vmware, etc.

  We have tried to limit the problem using wireshark, we noticed that speeds improved dramatically when running wireshark.  We have finally pinned it down to the NETWORK card is in promiscuous mode - mode "Promiscuous", web response times app are sub 100ms, and when we disable the promiscuous mode, response time pop up to 4 + seconds.

  I found a few articles that might put this question of vSphere RARP and NLB in unicast mode, but we do not use NLB on any of these servers, and many of our tests were performed on servers IIS "standalone".

  Someone encountered this problem before, and anyone has pointers?

  Thank you

  It looks exactly like the problem that is described in this thread:

  vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  You also use the vmxnet3 vNIC?

  If yes are trying one of these workarounds mentioned in the other thread (I'd go with LRO to start, do not forget to restart):

  E1000E use instead of vmxnext3

  Use jumbo frames (not really good for us but can be one good option for others...)

  Disable the LRO on a VMXNET3: enable or disable LRO on VMXNET3 adapter on a Windows Virtual Machine

  Turn on LRO overall on a Windows Virtual Machine

• SSO and vulnerabilities

  I have a few accounts with full privileges to do anything in SSO SSO. However, only [email protected] has all permissions in vCenter Server.  Do accounts that have full privileges SSO, but not given any privilege in vCenter, represent a vulnerability to vCenter if compromised, or just for SSO?

  If you have an account with full privileges in SSO so even if they do not have permissions on vCenter they might jeopardize the account [email protected] (change password, for example) and get full access.

  Mike

• Questions of SSO and vCO

  Hello

  I am trying to put in place a new vCO device and try to use SSO authentication. When I type in the invalid credentials and try to record, I get error messages stating that the credentials are not valid. When I type with the appropriate credentials, a weird error message appears, exactly how it is reflected in my image as an attachment. This account can log in to vCenter and has administrator rights. What could be the problem?

  Thanks in advance.

  Edit: I'm not sure if this helps, but I'm sticking which is added in the log when I try to register SSO. It seems to give the same error, even in the case of a bad name for username/password, but the error message on the authentication page clearly shows that he can make the difference...

  2014-07-03 23:33:50.716 + 0000 [vcoSystemTaskScheduler-1] INFO {} [PurgeSessionAdaptor] Started verification of 0 sessions against the authentication provider.

  2014-07-03 23:33:50.716 + 0000 [vcoSystemTaskScheduler-1] INFO {} [PurgeSessionAdaptor] checked 0 unique sessions in 0ms.

  2014-07-03 23:53:50.716 + 0000 [vcoSystemTaskScheduler-2] INFO {} [PurgeSessionAdaptor] Started verification of 0 sessions against the authentication provider.

  2014-07-03 23:53:50.717 + 0000 [vcoSystemTaskScheduler-2] INFO {} [PurgeSessionAdaptor] checked 0 unique sessions in 0ms.

  00:13:50.717 2014-07-04 + 0000 [vcoSystemTaskScheduler-1] INFO {} [PurgeSessionAdaptor] Started verification of 0 sessions against the authentication provider.

  00:13:50.717 2014-07-04 + 0000 [vcoSystemTaskScheduler-1] INFO {} [PurgeSessionAdaptor] checked 0 unique sessions in 0ms.

  You must create a user on the Web Client SSO administrator. You cannot use a domain account, this user must be a SINGLE sign-on user that allows you to create a unique user Orchestrator

• DR/BC Site, SRM, SSO and AD authentication.

  You don't know where to put this so feel free to move.

  I'm in the midsts of test DR/BC at this time with machines reproducing SRM until our BC site. We have improved at 5.1.1a all levels and since arriving in SSO, we had our fair share of issues. Some we have solved but a particularly important is not being able to authenticate with our domain controller off site on the site of BC when pull us the plug on the metro line.

  I can connect to the outside VC via the Web Client using normal references of our main site absolutely perfect, but when I change the LDAP authentication on the off-site DC via the SSO configuration as admin@system-domain page then I can not connect. I get "authentication failed".

  
  

  I also noticed I 'could not initialize at startup services' and a message informing me about the installation of a vCenter Server system when I login. I am not convinced THAT SSO is configured correctly, even if we have reinstalled three times now.

  
  

  

  
  

  It's obviously an obstacle we have to overcome because if we cannot connect when pull us the plug between the sites to simulate a situation of DR/BC, then we cannot recover virtual machines.

  
  

  Massive failure.
  

  Problem solved.

  Reinstalled one last time and this time a single site configuration. Rebooted everything, including the off-site DC and paid special attention to the Source of identity by using the editor attribute in ADUC to retrieve the DN for users and groups. I also changed the type of authentication to require a username and password and all went fine.

  DR is to go.

• vCenter for lack of SSO and no. log in the same root not

  Hi guys

  A journal of issues was announced today and I tried with my AD credentials to log my vCenter device 5.1 (build 880146). No go.

  Tried with root credentials. I couldn't either.

  So lucky me I found a loged in as Web client session yesterday I'm gone my SSO config I showed me this

  

  then I went to vCenter Web Config and tried to restart the server and still the same issue

  

  So at this moment I don't really know what has failed if was SSO or vCenter Server Service... so any idea that to find the cause?

  -updated

  Hey guys I found this/storage/sore we full-no idea how to avoid this problem?

  Size of filesystem used Avail use % mounted on

  / dev/sda3 9.8 G G 4.2 5.1 G 46%.

  udev 4.0 G 104 K 4.0 G 1% / dev

  tmpfs G 4,0 4,0 G 0 0% / dev/shm

  / dev/sda1 128M 21 M 101M 17% / Boot

  / dev/sdb1 20G 20G 100% 0/storage/core

  / dev/sdb2 20G 3.2 G 16G 17% / storage/log

  / dev/sdb3 it 20G 15 G 4.4 G 77% / storage/db

  Thank you very much

  the kernel contains the dump files... If you don't need those... Delete them... you can also take a look at this thread to have a store NFS to store the unannounced dumps core.

  http://communities.VMware.com/thread/403107?start=0&TSTART=0

  Concerning

  Girish

• Silent installation and scripted of SSO and vCenter 5.1

  Hello

  
  

  I'm looking to do a silent installation and SSO scripted and vCenter.

  
  

  The following worked for v5.0...

  
  

  «"Start/wait d:\vCenter-Server\vmware-vcserver.exe/q/s/w/L1033 /v" /qn DB_SERVER_TYPE custom = DB_DSN =------DB_PASSWORD = ' vc\'-'XXXXXXX\' DB_USERNAME =------'sa\' VPX_USES_SYSTEM_ACCOUNT = 1/l * v \"c:\vcinstall.log\»»

  
  

  ... but does not work by 5.1 and I can't find any documentation.

  
  

  Any help is appreciated as always.

  
  

  Thank you, Andy.

  Hi Andy,.

  As Boloo said, there are some underlying the rules for vCenter 5.1 that did not exist for 5.0, which means that some additional settings are required for an installation script.

  Here are some examples for you which I use when redeploy my lab (note that B:\VIM_51 is my media extracted folder):

  Installation of SSO

  start/wait B:\VIM_51\"Single Sign On"\VMware-SSO-Server.exe/L1033 /v"/ QR MASTER_PASSWORD = VMware1! CONFIRM_MASTER_PASSWORD = VMware1! CONFIG_TYPE = configuration SETUP_TYPE = basic SSO_DB_SERVER_TYPE =-"Custom\" JDBC_DBTYPE = Mssql JDBC_DBNAME = RSA JDBC_HOSTNAME_OR_IP = DC JDBC_HOST_PORT = 1433 JDBC_USERNAME = RSA_USER JDBC_PASSWORD = VMware1! SKIP_DB_USER_CREATION = 1 DBA_JDBC_USERNAME = RSA_DBA DBA_JDBC_PASSWORD = VMware1! COMPUTER_FQDN = VC. Lab.local IS_SSPI_NETWORK_SERVICE_ACCOUNT = 1 SSO_HTTPS_PORT = 7444 "

  Installation of the Web Client

  Start/wait B:\VIM_51\vSphere-WebClient\VMware-WebClient.exe/L1033 /v"HTTP_PORT HTTPS_PORT 9090 9443 SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = = = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  Installation of the inventory

  start/wait B:\VIM_51\"Inventory Service"\VMware-inventory-service.exe/L1033 /v"HTTPS_PORT = XDB_PORT = FEDERATION_PORT = QUERY_SERVICE_NUKE_DATABASE = 1 TOMCAT_MAX_MEMORY_OPTION 10111 10109 10443 = S SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  vCenter installed (at least)

  Start/wait B:\VIM_51\vCenter-Server\VMware-vcserver.exe/L1033 /v"/ QR DB_SERVER_TYPE = Custom DB_DSN = vCenterDB DB_USERNAME = vpx DB_PASSWORD = VMware1! FORMAT_DB = 1 JVM_MEMORY_OPTION = SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1 S! LS_URL =https://vc.lab.local:7444/lookupservice/sdk IS_URL =https://vc.lab.local:10443 VC_ADMIN_USER=vi-admin@lab VC_ADMIN_IS_GROUP_VPXD_TXT = 0 VPX_USES_SYSTEM_ACCOUNT = 1 VCS_GROUP_TYPE = VCS_ADAM_LDAP_PORT unique = 389 VCS_ADAM_SSL_PORT = 636 VCS_HTTPS_PORT = 443 VCS_HTTP_PORT = 80 TC_HTTP_PORT = 8080 TC_HTTPS_PORT = VCS_WSCNS_PORT = VCS_HEARTBEAT_PORT = 902 "60099 8443

  vSphere Client Installation

  "Start/wait B:\VIM_51\vSphere-Client\VMware-viclient.exe/q/s/w/L1033 /v" / QR ".

  VUM Plugin

  "Start/wait B:\VIM_51\updateManager\VMware-UMClient.exe/q/s/w/L1033 /v" / QR ".

  Install the Update Manager

  Start/wait B:\VIM_51\updateManager\VMware-UpdateManager.exe/L1033 /v"/ QR VMUM_SERVER_SELECT = vc.lab.local VC_SERVER_IP = vc.lab.local VC_SERVER_ADMIN_USER =-'lab\vi-admin\' VC_SERVER_ADMIN_PASSWORD = VMware1! VCI_DB_SERVER_TYPE = Custom VCI_FORMAT_DB = 1 DB_DSN = DB_USERNAME VUM = vpx DB_PASSWORD = VMware1! »

  Hope that helps, shout if you have any questions.