stabilization

Similar Questions

• Questions about video stabilization - iPhone 7 more

  Hi all

  Like most of you, I am an Apple enthusiast. I work as a videographer frelance. I use Apple products every day. I'm about to buy the new iPhone, but there are some issues that concern me. I've seen a few videos with the new iPhone 7 more, and it seems that video stabilization, its all just too bad. When the person walks, the camera is still struggling to stabilize images, and it gives a very poor video quality/eye. It seems that the video is allways glitching.

  I can't be the only one to notice this problem. Help, please! Do you know if its possible to disable? Which will probably solve this glitch.

  Best regards

  I have the same question. Today, I shot a lot of video footage and when I walk around with the camera I get a strobe effect. The video is useless. Does anyone else have this problem? It is with my iPhone 7.

• Stabilization repeat dominant analysis of movement several times

  I'm running 10.2.3 10.11.5 OS FCPX.

  I have a project of seven minutes and trying to do a clip that is a minute and a half of stabilization.  The "Dominant movement analysis" of this little clip repeats again and again and again.  It is 100% and seems so all over again.  After a few hours of this, I gave up.

  I made auto disabled.  However, even after running manually all made, the orange line continues to display above the clip and don't change after successive executions of dominant analysis of movement.

  I am not very well informed about the stabilization, but I read that dominant analysis of movement is only meant to work once.

  

  I don't use stabilization often (I slog along a tripod). This might work, however; It's a workflow rest of yore: bring your clip in its own separate project. Cut the clip to just the part you want to use more than one second of handles. To stabilize. Share the project as a master file, it will cook in the stabilization. Import the movie as a steady clip.

• Still holding image stabilization!

  Hello world!

  So I've always used iMovie to edit and make movies.

  I am currently a video, only like duration of 3 minutes.

  My first few clips are only between 2-5 seconds each.

  The first 3 stabilized without any problem, only took a minute or two. After 3 of them stabilized well, none of my other clips will be.

  For example, this clip, I'm working with right now is only 3 seconds long and tried to stabilize for HOURS.

  I tried to restart iMovie with no result. I left it running while I went to dinner to return to stabilising. So I tried to move to some other short clips and I always use the same question. It's so frustrating!

  Please, I hope someone has an answer for me!

  Now, he has decided to work!

  Do not know how to remove this element

• my continuous wireless printer going offline - how can I 'stabilize' the connection '.

  my continuous wireless printer going offline - how can I 'stabilize' the connection?

  Hello gerrie,.

  What I would do is put off the printer and the router so

  -essentially them turning off for about 10-15 seconds

  -and then feed the router back on waiting for all the lights turn on completely

  - and after that is back in the market I would re - turn on the printer and re-establish the connection between the printer and wireless network

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• Image stabilization creates warpy images! All the patches?

  I need to stabilize the movement of the real/frame image - but when I use Image stablilisation picks it up

  on any movement "within the image' (i.e. a tree blowing in the foreground) which gives a very nervous effect of deformation.

  Any way around this?

  Thanks in advance!

  FCPX v.10.0.4

  V.10.7.5 Mac OS x (on iMAC)

  WWhich type stabilization do you use? Try out the other.

• Camileo S20 stabilization

  Is it possible to turn on stabilization permanently in 720 p mode?
  When I turn camera on, stabilization is still disabled.
  Can someone help me?
  Thank you.

  Hey,.

  Normally the stabilization is always saved... If you put on the menu, press menu/OK to validate the settings.

  But don t forget this doesn t support HD (1080 p) and WVGA stabilization / 60 fps!

• TV 40WL768 Blink without active stabilization

  Hello

  I bought 40WL768 TV for use with a computer with HDMI.
  I use the mode "PC."
  With this use, I can not activate "film stabilization", because the cursor becomes too slow (latency).

  The problem is that I need to enable "film stabilization" otherwise the blink of the screen information.
  I have a feeling that the screen flashes because it activates this mode.
  I see this situation when I view a Web site with a lot of blue, for example.

  How can I permanently disable this mode (automatically) Please?

  Feel free to ask me for more information.

  Thank you very much.

  AFAIK the stabilization feature Film allows the adjustment of the movement
  smooth.

  This option depends on additional parameters:

  When the image is set to AutoView, the stabilization feature Film will have an additional mode of self.

  When the image is set to _Game _ this feature will be greyed out and automatically the value * please

  You can disable this option in the advanced picture settings menu,
  Press press right or left to select high, medium, Standard or power off.

• FS7K lens Image stabilization

  Received my KIt FS7K Thursday here in the United Kingdom.

  First of all, let me give you a profile of use of the previous video Sony:

  Currently I still own both the Sony HVR - Z5 (using Atomos) and Sony HXR - NX5 - my market spent was of videos on the site. Have all two large x 20 G lenses with IS excellent for the operation at hand. What residual movement at hand could often be stabilized using Adobe 5.5 and 2014 CC AE Stabilsing - no probem. I'm a fan of the 'pocket' more of 20 years, dating back to the early days of broadcasting in English

  What I see in my test of the FS7K shots is much more "shake". In fact I would say the lens SELP28135G gives me NO stabilization even if I chose the option "camera > Steadyshot > Steadyshot.» "Steadyshot Active" option which, in my experience in previous products, is 'more aggressive' is not selectable.

  I can confirm that the 'Otptical Steady Shot' switch on the lens all is market' '.

  Formats and codecs I test: HD 1920 x 1080 50 p and 50i as my previous experiences - not yet disappeared to test the 4K again.

  What gives? We expect the firmware updates?

  The Steadyshot indicator in the viewfinder, not necessarily told you the truth! This is why you must turn it on whenever you turn on. It is my understanding that this issue will be resolved in a next update.

  The asset IS is not compatible with the objective of stock but is compatible with some other Sony lens. Talk to your Sony representative to find out which ones who.

  See you soon,.

  Chris

• FCPX analysis sequences for stabilization, then stabilization rounds off the coast, which escapes me?

  I have the clip in a cam multi format, but I realized that I just couldn't stabilize a multi-cam even, the option was not available. So I went in the multi-cam clip and tried stabilizing angle, cut the part I was using and let the stabilizer integrated to analyze. Once it was completed, it turns the stabilization, and nothing was. I tried again by taking the element of origin of the event, and it's the same thing: analysis of dominant movement, 100%, then stabilization was automatically turns off and I remained without result.

  I guess I'm not understanding something and there is a reason that this clip will not stabilize, so I was wondering if anyone would be able to explain and if there is a work around, or if maybe it's a bug which is known.

  Thank you for taking the time to read my post, all the answers are appreciated!

  AAre activate you the stabilization or just run a scan?

• Close the stabilization on Alpha 7mk2 when using the tripod?

  On my previous camera, we were advised to cut objective of stabilization when using a tripod for a long (> 1 sec) exposure because stability can cause vibrations. Is this also the case on the Alpha 7mk2? Stabilization of the device must be switched off when you use a tripod?

  Altogether.

  Page 60 of this manual II A7:

  "When you use a tripod, turn off SteadyShot because there is a potential

  for a malfunction of the SteadyShot function. »

• Camileo S20 - bad video stabilization

  All series of camcorder S & P is a very bad video stabilization.
  A few tears. Learn how to shoot without jitter?

  Hello

  If the video stabilizer on my camcorder is turned on, the zoom in and out is not available.
  You should check if you have really turned the video stabilizer.

  But to be honest, you shouldn't compare video stabilizing properties of this camcorder with other camcorders that found you in the higher price range.

  My another camcorder I bought for prefessional use supports a video stabilizer and it is really good but the camcorder isn't a really cheap; 1299 euros
  It's a different price range ;)

• Stabilization goes far when in-line skating clips

  After I stabilize my video in full, I try to slide some clips so I can change the clip. But when I slide the clip, the stabilization shuts down for the full clip. It's annoying when FCP steady something, it is always changing a bit. So, the next clip looks without scales, which makes it sketchy. Why is this happening? How to avoid this? Please help, it's so frustrating.

  I use a MacBook Air (13 inches-mid 2013) OS X El Capitan version 10.11.2 and Final Cut Pro X 10.1.3

  YYou should put screenshots. This does not happen as you describe in the current version. What version do you use? It isn't 10.1.3 I think.

• How to set permanent stabilization in Camileo S10

  Hi all!

  I would like to know, how to set permanently stabilization in Camileo S10.

  Thank you.

  Hello

  If you are in the record menu press the OK button.
  In the video mode menu, you must change the stabilization of off to on. Then press the OK key to validate the settings.

  But don t forget the support of stabilization doesn t HD (1080 p) and WVGA (60 fps).

  Welcome them