Stabilizer chain on images 4 K fails to encode

Similar Questions

• stabilizer chain lot? Batch Timewarp?

  
  

  Is there a way to batch stabilize images?  (such as 200 video files)

  This question is asked over and over again!

  How about button to analyze all the clips? a single BUTTON that you click only once!

  I want to do lots of time remapping as well, but cannot while the film is fragile.  (A step must be made and made in the first place.)

  So I need a lot of workflow. Adobe do this?

  Or should I switch to Final Cut? It seems that its been both at the same time with no need to export. I'd rather not work flow switch, but I'm tired of click on analyze and export. Repeat steps.

  Thank you.

  The answer is a 'little', and there are a few caveats to know, that I have tried to describe as simply as possible below. It is true that you cannot apply Warp stabilizer or time-remapping as an effect of the main element. You can apply the length of the speed to the level of the main element, but you will not be able to activate the optical for her stream until you put it into a sequence.

  STABILIZER OF WARP

  If you're ok with the default settings of the effect, select all the clips in the order, and then drag the effect on one of them, he will be waving at all and start analysis. All clips must match the sequence so that it works just fine.

  If you don't like the effect by default settings, then apply to one, make the changes you need in the Options panel effect, do a right click on the header of the effect (in ECP), select all the remaining clips in sequence, and then paste. It will stick to all and start the analysis. All clips must match the sequence to make it work in this case too.

  TIME REMAPPING

  If you want time remapping (or speed/duration) with it, is that you need to restore and replace footage or nest. Time-remapping can be copied as a stabilizer chain or other effects, but speed/duration cannot be because it's a clip rather than an effect property in the ECP.

  It is also true that it is better to shoot them to be stable in the first place, as well as lighting and even changes in speed if you know that you will need to post like this. But the reality is that not all users have the equipment and knowledge to do so, or even if they do, sometimes things just don't get shot correctly. That's why we have tools developed as a stabilizer of warp, time remapping, optic flow, etc. to help users when conditions are not ideal. We want to help you find a way to get what you need to do in Premiere Pro.

• Creating an image of Windows failed to clean installed an upgrade of Windows on my new SSD. How to activate it?

  I changed my hard drive to take advantage of an SSD.

  I tried several times to create an image, but it failed several times.

  So I have a clean install on the SSD and the old facility as a 2nd hard drive.

  It is installed without product key, because it is a update disc. He has no

  find the previous installation on the other hard drive. I don't want to install Win XP,

  Upgrade Vista, Win 7, THEN proceed. How to activate it?

  Dave

  You might give this a go.
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.

  I hope this helps.

• Insertion of images of 1280 x 720, with stabilizer chain, sequence of 1920 x 1080?

  I'm editing a short documentary using the premier CS6 and 1920 x 1080 images. I want to insert sequences aerial that is shooting at1280x720 and I used the warp stabilizer to reduce shake them. What is the best way to insert these images stabilized in the sequence of 1920 x 1080? Thank you.

  Stabilized sequence of 1280 x 720 in a 1920 x 1080 nesting works very well.

  Create a 1280 x 720 clip sequence using the "new sequence of the clip.

  apply warp to the clip stabilizer.

  Drag the sequence in the project of sequence of 1920 x 1080 Panel. You can right click on the sequence and select "adapt to the size of the image" to fill the frame entirely.

• trying to deform stabilize 4 k images and then reduce to 1080 p before exporting it but error "string stabilizer requires clip dimensions to match sequence settings try nesting.

  I have a 8 min long 4 k sequence where all the video clips are the same size k 4. I can warp stabilize just fun but when I go on change settings for the sequence to 1080 p and then right click on each clip to scale to the framework I get error "string stabilizer requires clip dimensions to match sequence settings try nesting" the reason why I want to warp stabilize the 4 k images rather than 1080 p images is because with 4 k I have a budget of high culture, I can get away with before I got to the bottom of the scale, string stabilizer settings I use are in the jpg I have attached. I tried visualization of nesting videos online and I can't find what I need. As the now the only viable option I must deform stabilize 4 k and export under 4 k and then open a new project and import the stabilized 4 k images exported and reduce the sequence to 1080 p. I'll do that if I have to, but it will take a lot of time coding without a doubt. Any help is greatly appreciated.

  If the images do not match the sequence settings and you want to use the chain, you'll nest.

• Image stabilization creates warpy images! All the patches?

  I need to stabilize the movement of the real/frame image - but when I use Image stablilisation picks it up

  on any movement "within the image' (i.e. a tree blowing in the foreground) which gives a very nervous effect of deformation.

  Any way around this?

  Thanks in advance!

  FCPX v.10.0.4

  V.10.7.5 Mac OS x (on iMAC)

  WWhich type stabilization do you use? Try out the other.

• System Image backup has failed during the backup

  I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
  My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
  
  Product: A6Z59UA #ABA
  Model: g61d60us

  Hi CherylLyme,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

  I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

  You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

• OK created system image, but the Image of restoration FAILED! (0 x 80070057)

  1 installed Windows 7 Pro 32 bit on a SSD
  2 created an image of the system (reserved system + system C :)
  3 saved the picture to a different disk drive HARD internal
  4. has created a system recovery disk on a USB stick using Windows 7 USB/DVD Download tool

  A few weeks later, I need to restore the image of Windows 7 on the same SSD, I booted from the USB stick recovery and restore selected image I made earlier, Windows found the image and began the restoration, but a few seconds later he threw this error "the parameter is incorrect. (0 x 80070057) "and the restore operation failed. I need help with this, I did everything according to the book, so I'm puzzled!

  * Update * boot from the original system disk fixed the problem and I have the image files, thank you very much

• stabilizer chain requires clip dimensions to match the sequence (fix by nesting) HOW

  I have a sequence with HDV and flles MOV files. When you use the stabilizer to string it comes up with (to match sequence clip dimensions) (difficulty of nesting) HOW

  Chain clamp needs to be of the same size that the sequence otherwise, it cannot calculate the curvature.

  My method works also fewer clicks.

• Windows imaging component installation fails in my Windows7 64 bit OS

  I try to install the windows imaging component (Wic_x64.exe) to my windows 7 (Home basic) 64 bit OS. But it is to show the Setup error: "you are not authorized to update of windows, please contact your system administrator. It comes to my personal laptop. Help, please. At the same time, I also tried with (WIC_x86.exe) it shows error like "Seup could not find the update.inf file needed to update your system. Help, please

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Stabilizer chain needs to sequence clip parameters settings, nesting doesn't work is not for

  I'm putting a Warp stabilizer on a clip, but the clip settings are different for the sequence settings. I tried to fix this by "nesting" the clip but for some reason, this red line appears once I nested the clip and applied the effect. Is it possible to remove this red line and still keep the stabilizing effect despite the clip and sequence being different settings?

  Any help would be appreciated!

  

  Thanks for your reply, I managed to solve it by re-importing the clip and the re-applyig effects, he has now worked without going through the red line on the video.

• problem: import the image sequence into adobe media encoder

  Hello

  have a problem with adobe media encoder CS6, change the display Format to 25 time frame in the preferences of media coder, I import a series of TGA (170 images) to media encoder in an image file TGA sequence, the series generated from 3D applications Max and ToonBoom, specification of TGA series 1080 50i "1920 X 1080 - high filed - 25 frames per second. When I import the sequence, encode media recognize the sequence as 1920 X 1080 - progressive - 29.97 FPS, to interpret the window images options I change the settings of the upper sequence deposited - 25 fps, and I export to quicktime mov 1920 X 1080 - class top - 25 fps uncompressed

  the problem:

  mov file is 06:20 and it is right for the 170 25 fps calendar but mov file does not contain the tga series image, image freeze in time code 05:16 (number 142 of the framework) and duplicate the 142 image to the rest of the video file

  If I do not change the pace to interpret the window options images for the tga sequence what media encoder recognizes as 29.97 FPS mov file contain all TGA images, but with a duration of 05:16 which not 25 fps

  in adobe media encoder CS5.5 I don't get this problem at all

  1. How do I solve this problem?

  2. how to force CS6 adobe media encoder to recognize the image sequence imported as rate of 25 fps?

  Windows 7 Ultimate SP1, Adobe Creative Suite Master Collection CS6

  Thank you

  Post edited by: yas1amin1mah

  "Film" is finally fixed in November 2013 video updates of creative cloud. If your version of Premiere Pro and SOUL is or more 7.1.0 everything should work as expected. But don't forget to actually perform "Film" on your source in first Pro CC or CC SOUL that, otherwise your sequence of images will continue to be interpreted as 29.97 FPS by default.

• Export to YouTubeHD fails in encode: cannot read from the source file

  
  -----------------------------------------------------------------------------

  This is my first time using Premiere Pro CS4 and everything is fine until I get this error message in the encoder: AMEEncodingErrorLog.txt
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:45:37
  2010-08-23 19:45:56: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_1.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: NTSC DV high quality
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 01:51:01
  2010-08-23 19:51:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_3.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: Custom
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:14:41
  23/08/2010-20:15: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_4.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:19:36
  2010-08-23 20:19:55: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_5.prproj
  -Output file: D:\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:23:38
  2010-08-23 20:23:57: encoding failed
  Page 1
  AMEEncodingErrorLog.txt
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_6.prproj
  -Output file: O:\Calavo\CalavoV1.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 02:37:30
  2010-08-23 20:37:49: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.
  -----------------------------------------------------------------------------
  -Source file: C:\DOCUME~1\DANNES~1\LOCALS~1\Temp\Calavo Intro_8.prproj
  -File: O:\Calavo\Sequence 01.mp4
  -Preset used: YouTube Widescreen HD
  -Video:
  -Audio:
  -Bit rate:
  -Encoding Time: 08:39:10
  2010-08-24 14:40:19: encoding failed
  -----------------------------------------------------------------------------
  Could not read from the source. Please check if it is moved or eliminated.                                                                                                                                                                                                                                                                                                                                    Here are some details about my computing environment and this project which can be useful.  PC under XP Pro SP3 and is updated, I have a NAS 3TO where I store my videos and pictures as well as all my documents. The directories of film, photo and doc on this NAS are all drives mapped to my computer.   The project shows as 39 minutes long and consists of some .avi videos that I took with a Vado HD and lots of photos that I added narration to in Premiere pro.  Everything seems to work well when I start exporting. I can see the source and the output in the export Premiere Pro window, then when I press start the queue in Encoder CS4, the process fails and the yellow sign appears in the status column. By clicking on this sign performance opens the text messages I pasted in above. What I find particularly odd is that the error message trying to read a source file that is a temporary file on the C drive, rather than in the job file for this project, which is located on the D drive, a second HD to my computer where the Adobe Premiere 4.0 works directory is in the My Documents folder.                                                                                                                                                                                                                                                                                                                                                                                                                                            I have put a lot of time and effort into this project and I'm very happy with it, I just need to get it online.  I'm very grateful for any help you can give me.  Thank you.

  This might do the trick

  http://kb2.Adobe.com/CPS/407/kb407106.html

• Export without loss after Warp nouvis Image stabilization

  I apply image stabilization, then I want to make and re-import for correcting the colors and others. To speed up performance, due to the

  nature of the process of Image Stabilazation makes slow of course.

  The source file is saved with a helmet Cam Replay XD 1080 (model HD) .mov

  Basically I want to export the video with just the 'stabilizer chain', with possibility to reimport

  However, default lossless is out showing as AVI...

  I know how to change the format setting.

  However, I saw a video where when the guy did, she kept the .mov format, and it was not obliged to .avi.

  And anyway I go, the size of the resulting file is large enough.

  Is this normal?

  The default output on Windows module is an AVI file without compression. The default on Mac OS is a MOV file with compression without loss of Animation. Either of them will give you a huge file, since one is uncomprssed and one is only slightly compressed.

  more information here:

  http://forums.Adobe.com/thread/684381

• M6 Pavilion: HP Pavilion m6 Factory Image recovery fails

  The hard drive has failed, so I bought a new hybrid 500 GB drive. A directed recovery disks from HP and have tried running the setup of recovery, but the process remains still stuck at 23 percent of "copy of the files needed to restore the hard disk.

  I tried to reinstall about 10 times and it always gets stuck at the same stadium at 23%, and the audible DVD drive slows down or stops playback. After a few hours, it shows the message:

  Copy the file fails

  Of D:\PRELOAD\BASE2. STORMWATER MANAGEMENT

  To C:\RM\Image\BASE2. STORMWATER MANAGEMENT

  Press OK to retry

  I cleaned the discs with a Microfiber cloth for my glasses. Original drive was 750 GB. Connected the thorough check for the hard drive in the BIOS and check the RAM. The two passes. Here is a link to the article that I bought. http://www.Newegg.com/product/product.aspx?item=N82E16822178339

  Any help would be great

  Well, I found a solution. In fact I found it weeks and there has been a lot of work.

  First I asked myself, ' why is it I NEED to have a hard drive that is the same size as before or more? Well, the answer is quite simple: the only choice of HP is given to me is not to get the file .iso Windows but to get an image of Windows 7 that HP has changed with some soft/bloatware, they want to bundle with it.

  Despite what says the support agent, it has no technical reason, why I can't use a smaller hard drive. The comparison of the hard drive for car engines is, frankly, ridiculous. The more appropriate analogy for the hard drive would be the gas tank and the processor is the engine. A car with a 15 gallon gas tank will operate as one with a tank of gas of 20 gallons, in the same way as a computer with a 750 GB HARD drive will work with a 500 GB HARD drive. Of course, in both cases, you won't get as much with the smaller model, but it will certainly run. In other words, unless you provide an imager that will fail if it cannot write all the 1 and 0 hard disk he wants, much as do gas pump just insert their 20-gallon fuel tank. So I said screw this dictation arbitrarily bullcrap to me what type of replacement hardware, I buy in order to use MY laptop.

  Now, once I decided that these hoops with, HP and Microsoft, Setup for me to jump through is silly, I decided to make friends with a Penguin that I knew, but never talked to: Linux. This being my first time using Linux quickly led me to the selection of Ubuntu. He was surprisingly simple and easy to install. Now, most people could not understand how to do a Setup for an operating system disk, but if you know the difference between writing MP3 files on a disc and write a CD that can be used in a normal CD player, it's fine. Then, I used my wife's office to burn an installation disc, put inside and Ubuntu with happiness and flawless, himself installed on my laptop. He was ready to go with the pre-installed drivers and download the new drivers as needed during the installation after entering my password for Wi - Fi.

  Things were going well, but I'm not a computer programmer or work in it and I expect a steep learning curve. Well, boy was I wrong on that assumption. Almost everything I want immediately to use is already installed. Not only that, but it is much much faster he was when he was running Windows. The only part that took a little effort to make it work was to steam, but there are step by step guides that appeared just to look for "Steam Linux Installation." For my daily (read: Netflix, web browsing, even games) it works fine. It's a little tricky with the mouse pad, but I usually use a mouse in any case. Overall, I was very happy with it.

  Summary:

  Because Microsoft won't distribute the .iso files directly and HP insists that give you a picture of your laptop particular there is now a user of Linux more and a less Windows user. Honestly, why they do not just offer to send a picture of a laptop, they sold with a hard drive more small is beyond me (I know, legal shenaningans). So, thank you HP and Microsoft to encourage me to learn something else and get away from buying your products. I appreciate it.

  senorelroboto