Stack CRS Oracle is already configured when running root.sh

Similar Questions

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• Can save the configuration when running VI, but not file not when running EXE

  Hello

  I have attached a file zip containing a LabVIEW project as well as a built EXE.

  The program will load up the numerical value of the file config in both cases, but it will only write the configuration file when it is executed as a VI, not as an executable file. If I don't use the computer of JKI State, I do not think I see this problem, so I think it's the order in which the program quits? I tried to disable the Panel before closing, but that did not always help.

  Reading configuration file is made in the case of "Data - initialize" and the config file for writing in the case of 'Cleaning up' -.

  It seems that the difference between the run-time and development environment behavior is the Close event of front panel. It's in Dev mode, you do not go to the front > close State, but you don't have at run time. Try to run your cleanup command before the command close to see if that fixes it. If you close the front panel, the values could be recovered, VI OpenG has not all the values to get more because they have left the memory.

  If the Panel should be closed more quickly, but you need to hide the front panel without the closing, you can use the FP. Open invoke node with a contribution of the State of "hidden". This will hide the front panel while keeping open and then the Panel will always close end when your application terminates.

• Help: ora-15038 when run root.sh

  OS: Enterprise Linux oracle 6.4

  DB: database oracle 11.2.0.1

  After the grid install oracle rac, run /u01/app/grid/root.sh

  Description

  Ask Questions, get help and share your experiences with this Article

  Occurrence

  Symptoms

  Workaround

  Patches

  History

  References

  --------------------------------------------------------------------------------

  Applies to:

  OS Linux

  Oracle Database - Enterprise Edition - Version 10.2.0.1 to 11.2.0.4 [version 10.2 to 11.2]

  Linux x 86-64

  Haansoft Linux x 86

  Description

  After leveling SAN 'IBM NSeries N7950T - Data ONTAP 8.0.2P3' firmware 'BM NSeries N7950T - Data ONTAP 8.1.1' firmware, ASM starts cannot be mounted because of errors the next:

  SYS@+ASM2 > alter diskgroup DATA11G mount.

  change the mount diskgroup DATA11G

  *

  ERROR on line 1:

  ORA-15032: not all changes made

  ORA-15017: diskgroup "DATA11G" can not be mounted.

  ORA-15063: ASM discovered an insufficient number of drives for diskgroup

  'DATA11G '.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  --------------------------------------------------------------------------------

  Ask Questions, get help and share your experiences with this Article

  You want to explore this matter further with other customers of Oracle, Oracle employees and Industry Experts?

  Click here to join the chat where you can ask questions, help others and share your experiences with this particular article.

  Check out the discussions on other articles and useful topics by clicking here to access the Homepage My Oracle Support community for installation/update of database.

  Occurrence

  (A) origin configuration:

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.0.2P3 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  (B) the problem started on the new configuration 'IBM NSeries N7950T - Data ONTAP 8.1.1':

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.1.1 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  Note 1: The problem can occur on any version of ASM (10.2.0.1X to 11.2.0.X).

  Note 2: The problem can occur on any release ASMLIB.

  Note 3: This problem can occur with any other provider of storage, if the firmware update changes / changes physical_block_size = 4 096 bytes (4 KB).

  (C) this is a problem with "logical_block_size" are present now drives = 512 bytes and "physical_block_size" = 4 096 bytes (4 KB) because of follows her SAN firmware upgrade:

  Before the updated firmware to the storage device:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  512

  After the update of the storage device firmware:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  4096

  This problem occurred because of storage the device firmware has been updated. The old firmware reported size of logical block of 512 bytes / 512 bytes physical block size, after the upgrade, the new firmware reported, 4096 bytes physical block size / size of 512 byte logical block. Therefore, a diskgroup created with 512 bytes blocks now suddenly work on a device to report areas of 4 096 bytes. Why ASM will refuse to import/up the diskgroup (s).

  In other words, the logical sector size is presented = 512 bytes and the physical size of area presented = 4 096 bytes (4 KB), it is not supported by ASMLIB API at this time.

  (E) despite the ASM starts were created on 512-byte sector size disks, ASM detects disks ASMLIB with a = 4096 bytes (4 KB) sector size instead of a size of sector = 512 bytes, this inconsistency is causing the issue (ORA-15085: ASM disk "" is the size of sector incompatible.):

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ------------------------------ -----------

  ...

  0 75 ORCL:TMSTS01_LUN010 4096

  (E) but if the ASMLIB is disabled/bypassed (ASM_DISKSTRING = "/ oracleasm/dev/discs / *'"), then the disks are presented/detected with a sector size = 512 bytes:

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ---------------------------------------- -----------

  ...

  / dev/oracleasm/disks/TMSTS01_LUN010 0 75 512

  (D) this problem is due to update the Firware SAN and the next bug ASMLIB (ASMLIB enhancement):

  ? Bug: 13999609 - REPORTED PHYSICAL BLOCK SIZE CAN CAUSE PROBLEMS WITH DATA 10 G databases

  ? oracleasm pilot (ASMLIB) from today works in the expectation that the logical block size and the physical block size are 512/512 bytes. This particular/firmware storage seems to be, then the configuration will not work with the oracleasm driver.

  ? We understand that size of 4K sector disks must be supported, so we are working on a solution of development of ASMLIB.

  ? Therefore, currently, this update of the firmware of the SAN is not certified and is not supported with ASMLIB.

  Symptoms

  Error description:

  15085, 00000, "ASM disk \"%s\"has inconsistent sector size. »

  * Cause: An attempt to mount a diskgroup failed because a drive reported

  value of incompatible sector size.

  * Action: Use disks with sector size compatible with the Diskgroup sector size,

  or ensure that the operating system can properly report the disk

  sector size.

  //

• TopLink Grid: Create EntityManager fails when running on WebLogic

  Hello
  I am creating WebService that usus TopLink grid to access data. First of all I created simple stand-alone application with TopLink grid and all work very well. Then, I created WebService based on app created previously.
  When I try to run WebService deployed on WebLogic, I got error:
  "line Class ="Oracle.EclipseLink.Coherence.Integrated.config.GridCacheCustomizer"file =" GridCacheCustomizer.java "="30"method ="Customize. "
  java.lang.NoSuchMethodError org.eclipse.persistence.descriptors.ClassDescriptor.setFullyMergeEntity (Z) V
  It fails in the entityManagerFactory.createEntityManager () method.
  If deleted the eclipse configuration file - link.xml webservice customizer statement works. Maybe for server application needed some additional configuration or initialization?
  
  
  Thank you
  Alex
  
  Published by: user9360947 on March 29, 2012 06:09

  What is the version that you perform the deployment? The method not found was added in a later version, so it is probably there is a version mismatch where the Weblogic instance that is running and the version that you configured when running stand-alone. I think you need probalby use a version of Weblogic as 12.1.1 which comes with TopLink which includes EclipseLink 2.3.2 for this to work, or use a different version of EclipseLink which comes with the Weblogic instance that you are using. Tom described here:
  http://dev.Eclipse.org/mhonarc/lists/EclipseLink-users/msg06874.html

  Best regards
  Chris

• what the step to follow oracle when run select, delete, update...

  Hi expeerts,

  I want to know analysis thorough database oracle for performance - tuning. when we execute these queries as shown below in oracle. what oracle stage to execution. Please tell me step by step. my new in oracle, I try to understand what happens when we run these command. I have read a lot of blog and book but the thing very confuse me. Please help me solve these...  

  
  

  Select (with where, order by, and group by clause) = >?

  Delete (with where clause) = >?

  Update (with where clause) = >?

  Truncate and drop = >?

  Reg,

  Hard

  The SELECT, DELETE, and UPDATE all the

  (a) read buffers of memory if it is already present in the memory

  or

  (b) retrieves the disk blocks in the buffers

  The DELETE and UPDATE statement must then update the buffer in memory.  The buffer can be written on the disc of "lazy" way by the DBWR process - that is to say the actual writing on the disk is postponed to later in time.  The changes caused by DELETING and UPDATING are captured in food stamps by progress and what is written on the disc as soon as or before a COMMIT is issued.

  The TRUNCATE causes a control point of the segment (ensure that all Sales belong to the table buffers are written to disk) before the scopes are released and updated by the high tide.

  Hemant K Collette

• Error when running a page in J Developer - java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

  Hello

  In J Developer a strange error happens when I try to run any page yesterday.

  I don't know what happened and how do I fix this

  Can someone please help me what to do?

  Screenshot below shows the dialog box when opening the developer J (10.1.3.3)

  

  Here is the error when running a page,

  java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

  at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:128)

  at oracle.jdeveloper.xml.URLDomIO.load(URLDomIO.java:21)

  at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)

  at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:37)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getServerConf(Oc4jConfigAdmin.java:227)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getRmiServerURL(Oc4jConfigAdmin.java:978)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getRmiServer(Oc4jConfigAdmin.java:1002)

  at oracle.jdevimpl.runner.oc4j.Oc4jZombieUtil.okToProceed(Oc4jZombieUtil.java:38)

  at oracle.jdevimpl.runner.oc4j.Oc4jStarter.preStart(Oc4jStarter.java:614)

  at oracle.jdevimpl.runner.oc4j.Oc4jStarter.start(Oc4jStarter.java:269)

  at oracle.ide.runner.RunProcess.startTarget(RunProcess.java:830)

  at oracle.jdeveloper.runner.JRunProcess.startTarget(JRunProcess.java:473)

  at oracle.jdevimpl.runner.run.RunningProcess.startTarget(RunningProcess.java:76)

  to oracle.ide.runner.RunProcess$ $2 1.run(RunProcess.java:768)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  Caused by: oracle.xml.parser.v2.XMLParseException: start of the element root waited.

  at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:292)

  at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:115)

  ... more than 20

  java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

  at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:128)

  at oracle.jdeveloper.xml.URLDomIO.load(URLDomIO.java:21)

  at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)

  at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:37)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getServerConf(Oc4jConfigAdmin.java:227)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getHttpWebSiteConf(Oc4jConfigAdmin.java:359)

  at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getHttpPort(Oc4jConfigAdmin.java:1125)

  at oracle.jdevimpl.runner.oc4j.Oc4jPortConflictUtil.acquirePorts(Oc4jPortConflictUtil.java:58)

  at oracle.jdevimpl.runner.oc4j.Oc4jStarter.preStart(Oc4jStarter.java:622)

  at oracle.jdevimpl.runner.oc4j.Oc4jStarter.start(Oc4jStarter.java:269)

  at oracle.ide.runner.RunProcess.startTarget(RunProcess.java:830)

  at oracle.jdeveloper.runner.JRunProcess.startTarget(JRunProcess.java:473)

  at oracle.jdevimpl.runner.run.RunningProcess.startTarget(RunningProcess.java:76)

  to oracle.ide.runner.RunProcess$ $2 1.run(RunProcess.java:768)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  Caused by: oracle.xml.parser.v2.XMLParseException: start of the element root waited.

  at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:292)

  at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:115)

  ... more than 20

  I guess BC4J Server is not running.

  Please help me.

  Had to extract the patch again and run the new developer,

  Old data of projects migrated to this new folder, then it is running

• Error when running report in oracle applications

  When running the report in oracle applications, I am getting below error
  
  Arguments
  ------------
  AS_ON_DATE =' 2013/03/21 00:00:00 '
  sdate =' 01/04/2012 00:00:00 '
  EDATE =' 2013/03/31 00:00:00 '
  ------------
  
  Obliging NLS_NUMERIC_CHARACTERS to: '.,' for the treatment of OPE
  
  APPLLCSP Environment Variable to:
  
  NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:
  American_America.AL32UTF8
  
  '.,'
  
  Enter the password:
  REP-0004: WARNING: could not open the file of user preferences.
  REP-0300: ORACLE error occurred.
  REP-0069: internal error
  REP-57054: work in progress completed: completed with error:
  REP-300: ORACLE error occurred.
  
  I tried to run the same report in Report Builder, it works according to the condition. But it does not work in oracle applications.
  
  Help, please.
  Thanks in advance.

  Hello
  To resolve the warning (REP-0004: WARNING: could not open the file of user preferences), copy the file prefs.ora to your report builder $ORACLE_HOME/tools/admin/directory in the directory $HOME of the Applications.

  Please do the above step after that, if you get an error, please paste the same thing here.

  Select this option if this helps you.

  Kind regards
  Kishore

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• ASMCA needs Oracle Grid Infrastructure Configuration ASM

  Hello
  
  I try to install DSO 11 GR 2 on RHEL5. I use VMWare Workstation.
  
  I have already installed Oracle database and software infrastructure of grid on this machine. During the installation of network infrastructure, I chose only the software grid Infrastructure.
  Once this succeeded, I'm trying to create instance ASM using the asmca.
  
  About the discs, I use raw devices. I created a virtual disk that I have partitioned but have not formatted. Did this to create the raw device
  [root@localhost sysconfig] # / bin / / dev/raw/raw1 gross/dev/sdb
  / dev/RAW/raw1: linked main 8, minor of 16
  and added
  ACTION == "add", KERNEL == "PSD", RUN += "/ bin/raw/dev/raw/raw1 %N".
  at /etc/udev/rules.d/60-raw.rules
  
  Then I tried to create the disc, but it failed. So I did the following steps to resolve this
  [software root@dhcppc2] # /etc/init.d/oracleasm createdisk VOL1/dev/sdb
  Disc marking 'VOL1' as an ASM drive: [FAILURE]
  
  [oracle@oracle11gR2 grid] $ tail-f/var/log/oracleasm
  Device "/ dev/sdb" is not a partition
  
  To solve this problem
  [root@localhost ~] # / usr/sbin/asmtool - C-l/dev/oracleasm - s/dev/sdb VOL1 n - force = yes
  asmtool: device "/ dev/sdb" is not a partition
  asmtool: continue anyway
  
  I am now able to view the asmdisk to the listdisks option.
  
  Have defined following environment variables before you run the asmca
  [oracle@oracle11gR2 ~] $ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/Grid
  [oracle@oracle11gR2 ~] $ export PATH=/u01/app/oracle/product/11.2.0/Grid/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
  
  When I run ASMCA I am facing this error - Oralce grid infrastructure is not configured correctly. ASMCA needs Oracle Grid Infrastructure Configuration ASM
  Any thoughts?

  If it is not clear what you are doing and how, or two things.
  (1) if I remember correctly, the raw device support is he more RHEL5, OEL5 and 11.2 oracle db. You must use block devices, set up with the ASMLIb to use for ASM.

  (2) did the ASMCA successfully configured when you installed the grid Infrastructure?

  I have a very strong hunch that your installation is not correct. I suggest that clear you all, then reboot.

  HTH
  Aman...

• My Acrobat Pro 11 appears msg 16 "Please uninstall and reinstall" what I've done 4 times already, so I run it and get the same msg

  My Acrobat Pro 11 appears msg 16 "Please uninstall and reinstall" what I've done 4 times already, so I run it and get the same msg.  I spent 4 hours chatting with Adobe engineers who have not helped.

  Hello

  Sorry for the delay in reply!

  Please run as administrator (right click on the Acrobat icon & then run as administrator).

  You can check error: 16

  Error 16 on Creative Suite 6

  Acrobat X Pro: Configuration error when viewing PDF files

  The first step should help resolve the issue.

  Let us know if this helps!

• Oracle Fusion Middleware Configuration Wizard does not display alternative OAM

  @

  I m install OAM. I installed Weblogic and the MRI suite. When I start the Oracle Fusion Middleware Configuration Wizard, I expect to see an alternative to choose to create a new domain or use an existing one. Im not seeing this and rather Im getting a text information of General information. When I click Next I get only the alternative to configure OIM OAM not or any other component.

  No idea why this is?

  Hello Stefan,

  Where you start the config.sh from? It must be run from $MW_HOME/oracle_common/bin/config.sh

  You can then select either a new domain or extend an existing domain, where you can select Oracle Access Management.

  Kind regards

  Jeffrey

• "404" error when running ADF Applications using Weblogic / OAM / Webtier

  Hi Experts,
  
  Our organization works on the implementation of Weblogic 10.3.5 on HP - UX 11.31 / PA RISC hardware.
  
  All is well enough to work, but we met a particular hurdle and I hope I can get some advice from people here in the forums.
  
  We have virtual hosts within the Weblogic web layer for different areas. We also have Oracle Access Manager configured to protect some web resources (to force the user to authenticate to access the page). Each virtual host is configured to use the https protocol, and we have SSL certificates installed.
  
  The problem arises when trying to deploy an ADF application for weblogic, then run it through one of these virtual servers. We want these applications to use https only. Mod_wl_ohs has also been configured to forward requests to the web layer weblogic.
  
  App deploys fine, and when you try to access the app, we are redirected to a login page by OAM, which is what we want. However, when the application starts to run, it seems that ADF is adding to the URL query parameters, and when he does this, redirecting to https, which causes a 404 error. If you manually add the 's' on the URL, the application loads and works very well.
  
  For example:
  Say the url of our application is
  https://foo.mydomain.com/MyApp/faces/search
  Navigate to this url redirects to the login page. After the connection, we headed over to something like this (the actual settings vary):
  http://foo.mydomain.com/MyApp/faces/search?_afrLoop=7078069345015890 & _afrWindowMode = 0 & _adf. CTRL-State = yvpch8hdh_4
  .. which returns a 404 error.
  If put us the 's' on the url, it works as expected.
  
  Why is this happening? Why is redirect to the login page staying is not in https?
  
  To facilitate debugging, we created a very simple jsp page that was not developed using ADF, and deployed in a similar way, and he remained in https after redirection from the login page.
  
  Is this a specific problem ADF? Is something that needs to be configured in the ear file deployment of JDeveloper?
  
  Any advice would be much appreciated...
  
  Published by: corn on September 18, 2012 09:43

  Hello

  It seems that you use any porxy between the two.

  Please activate weblogicplugin activated under

  Server--> --> configuration--> advance.

  Enable this option and try to restart the server again.

  Kind regards
  Kal

• Error when running adconfig.sh after migrating to 11 g

  Hello
  
  I've migrated my EBS of 10g and 11g db.
  Then to enable automatic configuration, created the context file using the adbldxml.pl script.
  
  Now when running adconfig.sh, it is a failure.
  
  The display of the log file
  
  afmkinit.sh out with status 127
  
  .end std out.
  CP: error while loading shared libraries: libc.so.6: cannot open shared object file: no such file or directory
  touch: error while loading shared libraries: librt.so.1: cannot open shared object file: no such file or directory
  
  Thank you

  Please see these documents.

  AutoConfig Fail loading libraries Libc.So.6 and Librt.So.1 [ID 730128.1]
  Installation of Oracle EBS 11.5.10.2 on OEL fails [ID 747424.1]

  Thank you
  Hussein

• When running scheduled report, receive error message "table or view does not exist.

  This is the first time that we play with the planning reports. We can schedule a report to base without problem, BUT when the report begins to call database packages it starts mistake. We found the package is called end but when it's a SQL query he does not know the scope of the table. For example if the code says "select * of per_all_people_f' he doesn't know what per_all_people_f. BUT if I change the code to specify the owner of the table ' select * from hr.per_all_people_f' then it will run successfully."
  
  In discoverer we have it set up so that a generic user db (DISCO_SCHEDULE) is used when running scheduled reports. I searched metalink and we run scripts of Oracles about this user setting. At this point, we think of creating a group of synonyms for tables of this error, but thought that it had to be a better way.
  
  Anyone have any ideas on how to solve this problem? Their a configuration step we missed when setting up the user db DISCO_SCHEDULE?
  
  Thanks in advance for any assistance received.
  
  Marty

  Hello

  Your problem is that you call the function hr_general.decode_person_name the DISCO_SCHEDULE user and like most HR packages, the package hr_general is defined with the current_user rights. Therefore, the package will use the privileges of the current user when the package is run.

  You can try to grant privileges to the tables to the DISCO_SCHEDULE user and creating the necessary synonyms, but you will struggle to get this working. HR packages refer to other packages and tables, and ensure that you have all the privileges that are put in place will be virtually impossible.

  Another approach is to create a view owned by APPS that makes calls to the hr_general package. You can also create a wrapper function which is owned by APPS and created with the copyright that calls the package hr_general. You can then call this package instead of using hr_general.

  Rod West