Cascading Linksys router to another router (LAN LAN)

Similar Questions

• WRT1900AC OpenVPN sees only not the side of the router LAN

  I have a WRT1900AC with the OpenVPN server, put in place.

  Can I access with my laptop running the OpenVPN client on the internet (the router is in one State other than me).

  I ping the hotspot side WAN, internet access at the router.

  I can't see or ping devices on the side of the router LAN.

  The address of the router LAN is 10.2.3.1 which I can not ping when I am connected through the OpenVPN client.

  The OpenVPN am assinged IP is 172.19.13.3 and the DHCP server on the LAN router is not a fixed range of 10.2.3.35 to 10.2.3.50 with cameras with IP in the range of the DHCP server.

  I guess that once I connect to the OpenVPN server in the router it automatically will fill for the devices connected to the router ports, is this correct? Y at - it a setting I need to change?

  Thanks in advance!

  The router firmware is up-to-date (we keep turned on the auto update feature).

  Today, I can access the devices connected to the router ports via the VPN.

  I do nothing else than yesterday, but it works... so for now, the issue is resloved...

  I guess I had the correct settings.

  I hate it when things get fixed, but I don't know why!

  Thank you for your support.

• We add a wireless "router sub" or to our current router Linksys router cascading

  Hello

  Add a router under or a router cascade to our current Linksys router because when we have people at the meetings, we do not want our regular wireless accessible by all.  We look at the HD Video Pro EA6500.  Do we need to buy a bridge?  No matter who is the master and who is the slave?  Are there more questions, what should I ask?  The EA6500 is compatible with all other models of Linksys?   I read some of the questions and answers on this forum of the Linksys community but I don't know where I should start.

  Thank you very much.

  The Smart AC Linksys router Wi - Fi 1750 HD Video Pro, EA6500 allows you to access the Internet via the Wi - Fi and.  Router Linksys Smart WiFi, EA6500 is ideal for applications focused on media such as streaming video, games and voice over the Internet (VoIP) phone.

  More control over these articles.

  Get to know the router Linksys Smart Wi - Fi, EA6500

  Linksys router Smart Wi - Fi, EA6500 frequently asked questions

• W7 PC on the router LAN port cannot find connected wireless OJ Pro 8500 has more router suite upgrade

  My broadband provider has replaced my internet router with a new one with dual N band Wireless LAN GigE ports and. The 8500 a printer has been successfully connected WPA Wireless and works very well with a laptop Windows 7 Sony connected wireless and Apple devices.  However neither the desktop PC connected windows 7 Dell LAN or even Sony laptop when it is connected to a router LAN port can find the printer.  I tried to reinstall the printer software with the latest version on the site of HP OJ8500_A910_1315 and the installation fails as auditor of network environment cannot find the printer. I ran the diagnostics of HP network with two firewalls in the PC and router disabled without success. The LAN itself seems to work OK as the PC can meet, Exchange files and and can access the internet.  The router has been checked by the technical uupport of the broadband service provider.  The printer is visible as a network connected device in Windows Explorer so you expect the HP software to see. The only option to set the printers IP address and use it in the installion process or is there other settings that I can change to get the HP network environment checker works correctly?  Thoughts would be appreciated.

  Thank you very much.  Unfortunately the router (a BT HomeHub4) does not have such a context, in the hub Manager, which is accessible by the user but I have now found it has the ability to set the IP address of a wireless device if I did. I reinstalled successfully on the printer to all computers.

• With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

  Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

  Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

• Problem with access to the camera on the net via dsl modem and linksys router

  OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.

  I think that the problem of my lie with ip addresses.

  Camera 192.168.0.115

  Router 192.168.0.1

  Modem 192.168.1.1

  The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?

  The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.

• Satellite M60-164 and the connection to the Linksys router

  Hello

  Ive had my Toshiba laptop a couple of weeks now and the stability of wireless is trying to grind on me...

  I had an older Toshiba laptop that I have connected to my linksys router with a PC card wireless of linksys... absolutely no problem at all with him for over a year...

  Since buying this one with built in the wireless, the only way I cn get the connectivity Toshiba dctor to detect the connection is too "no broadcast" disable my router, my neighbor commented that he could get on my network!

  Sometimes when the PC is start the 'LAN' and 'Wireless' icons on the departure to the high bar take ages to appear... and when they finally do a wireless has a yellow triangle with an exclamation mark in it... and the internet does not work...

  Sometimes it takes me 3 or 4 times to restart my computer and the router to recognize each other...

  It is certainly an issue on the laptop... I can always connect to each time without fail on the other laptop (who is now my wife) and I have a floor Office from PC using a netgear PCI Wireless crd and which connects no problem every time...

  I cn kind of deal with it, but its bothers me why I can't even detect the connection to the network during the broadcast is disabled (even when Ive found by scanning with seized me the name of the network)...

  Ive tried linksys... but couldn't find anything, and as I say... my other PC works smoothly to al...

  Hello

  Deactivation of an access point function just broadcast SSID prevents broadcast the SSID.
  If you want to know more on wireless technology or the settings of the router, please check this useful site:
  http://Forumz.TomsHardware.com/Network/FAQ-ftopict20497.html#46

  But don't know about the card installed in this unit wireless network. It s a 2200BG Intel wlan card and if you will look on other assignments, there are many questions about this wlan card.
  Usually the wlan card driver update will solve some problem of connectivity and also turning off the power save mode in the properties of the wlan card.

  Please also see this section:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11445

• Unable to connect to the Internet through a Linksys router Vista Satellite L300

  Hello guys,.

  I hope someone can help me.

  I tried to configure connect wireless to the internet using my new laptop. I used the wizard to set up the connection and he found my linksys router and it binds with it very well. Then when he tries to test the internet connection, it will just say error. I have not had this problem before and I'm a bit confused. When I thrn try to access a web page, I just get "Page cannot be displayed". I have troubleshooted and tried to reset the router, cable modem and laptop with no luck.

  Please could someone help with this?

  Any help would be greatly appreciated.

  Thank you

  Chris

  Hello

  To my knowledge, the router first with the data from your ISP.

  If done correctly, you should be able to connect to internet via LAN cable.
  Did you check that first? Do this!

  So if you can properly connect to internet via LAN cable, I would recommend set up the WiFi network on the router.
  There is a will to put the SSID (name of the WLan) encryption settings, MAC address filtering, firewall, etc.

  If these settings have been configured correctly, then you could try to configure WLan settings on your laptop!

• Linksys Easy Link Advisor [connected Lan users]

  Hello. I use Linksys Easy Link Advisor, I use my laptop and is connected via wireless mode, now one of my computer connected via Lan line [Ethernet cable]. The line of LAN and wireless computers work fine, but if I use a wireless laptop I can't watch the computer connected to the LAN.

  Configuration router I enabled wireless and all the computer as a wireless MAC filtering and computers Lan line are recorded. But in Linksys Easy Link Advisor the Lan computer line does not.

  Help, please.

  I am grateful for your side of the team that helped me solve many problems for Linksys Easy Link Advisor.

  What Easy Link Advisor version do you use?

  Also try disabling the firewall on the computer, and then check.

• Linksys router WRT160N v3 warning disconnect and reconnect

  Hi all

  I know that you've all probably seen this thread before. (I know I have).

  I have a WRT160N v3 Linksys router and it keeps disconnect them and then reconnect. It disconnects wireless only. LAN still works fine.

  I tried many different methods to solve this problem, but none does not seem to work.

  I'm very disappointed with the quality of the product. He did everything since it was purchased. I personally would have sent in for repair, but others in my household would not have agreed to that.

  Additional features:

  -Firmware Version 3.0.03 (no later than as of July 2010)

  -A a SSID set to broadcast

  -A encryption WPA2-Personal

  -Mixed-mode network

  -Width of the channel set to Auto (20 MHz or 40 MHz)

  -Channel set to Auto

  Please help me solve this problem.

  Thank you in advanced.

  In my view, that it is corrected. I'm using dd - wrt firmware instead of ciscos

• Windows Vista Home Basic Edition, Acer laptop wireless, Linksys router and connect Lexmark X 9350 wireless network.

  I'm tired... I tried everything I can think of, as well as everything I can find online in order to connect my printer Lexmark X 9350 WiFi for my Acer laptop which is connected to my home network wireless via my linksys router. At the same time, the printer has been set up through my existing wireless network and was working properly. (FOR A SINGLE DAY!) Then I got the bright idea to installNorton Anti Virus Security. Since then, my printer stopped working through the wireless network. It works as a stand-alone Copier and fax machine, but nothing of the printer.  I contacted Lexmark via online support, but their suggestions did not work or were so confusing that it would take a computer technology to interpret the instructions to correct the problem. I learned more about the Wi - Fi networks and computer by trial and error, I should be able to re - connect my printer the eyes bandaged.  Help, please... This problem is ongoing for weeks. Thank you so much in advance.

  Just a thought, as you say it started with Norton check his firewall exceptions:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• PIX 501 and VPN Linksys router (WRV200)

  I inherited a work where we have a Cisco PIX 501 firewall to a single site and Linksys WRV200 Router VPN on two other

  sites. Asked me to connect these routers Linksys firewall PIX via the VPN.

  According to me, the Linksys vpn routers can only connect via IPSec VPN, I'm looking for help on the configuration of the PIX 501 for the linksys to connect with the following, if possible.

  Key exchange method: Auto (IKE)

  Encryption: Auto, 3DES, AES128, AES192, AES256

  Authentication: MD5

  Pre Shared Key: xxx

  PFS: Enabled

  Life ISAKMP key: 28800

  Life of key IPSec: 3600

  The pix, I installed MDP and I tried to use the VPN wizard without result.

  I chose the following settings when you make the VPN Wizard:

  Type of VPN: remote VPN access

  Interface: outside

  Type of Client VPN device used: Cisco VPN Client

  (can choose customer of Cisco VPN 3000, MS Windows Client by using the client MS Windows using L2TP, PPTP)

  VPN clients group

  Name of Group: RabyEstates

  Pre Shared Key: rabytest

  Scope of the Client authentication: disabled

  Address pool

  Name of the cluster: VPN - LAN

  Starter course: 192.168.2.200

  End of row: 192.168.2.250

  Domain DNS/WINS/by default: no

  IKE policy

  Encryption: 3DES

  Authentication: MD5

  Diffie-Hellman group: Group 2 (1024 bits)

  Transform set

  Encryption: 3DES

  Authentication: MD5

  I have attached the log of the VPN Linksys router VPN.

  This is the first time that I have ever worked with PIX so I'm still trying to figure the thing to, but I'm confident with the CCNA level network.

  Thanks for your help!

  Hello

  Everything looks fine for me, try to have a computer in every network and ping between them. Check the newspapers/debug and fix them.

  Let me know.

  See you soon,.

  Daniel

• Port Forwarding issue with HP Photosmart C7250 / Windows 7 / Linksys router

  Help, please! I worked on this problem with HP, Microsoft, No - IP.com, etc with no resolution.

  I have a 650 workstation DELL computer in office which has been recently formatted and had a clean install of Windows 7 will be of all installed updates. He is running Free AVG 9.0. There is a Linksys WRT54GS Wireless with disabled DMZ and Port 80 (only) active.

  I have installed no.-solution of IP.com for the creation of a hostname to point to my dynamic IP address.

  I need to have Port 80 go to the IP address of my PC so that I can set up synchronization option Wireless of my CRM with my iPhone and Blackberry. Instead, whenever I created the public IP address or host name, it brings me to the Web Interface of my HP Photosmart C7250 printer. Even, I assigned a static internal IP (and DNS) address to the printer (192.168.1.101) but no matter what I do Port 80 goes into that compared to the IP from my PC to 192.168.1.110 which is the IP in my router.  The printer is set up wireless on Channel 6 (WEP encryption).  UPnP is disabled.

  I called HP and they said, there is no place that port forwarding is enabled. This doesn't seem to be the case. I tried to change the internal IP address of the PC to 192.168.1.101, but it had nothing works (could not ping or pull up the Web Interface for HP). I tried to add a different port number and it doesn't work.

  I need Port 80 to connect to my IIS server. Microsoft says that this is but another State Tech that disrupts the HP software. From the HP Web Interface, it is what appears when I type in my host name or public IP address and it's not going to my PC, then I have a tendency to agree.

  FYI... I unplugged the printer and now when I try to ping the public IP address, I always get a response (even after half an hour of the printer being disconnected). Please HELP ASAP! Thank you!!!

  Solution - on secondment in case anyone else ever runs into this.  Update the firmware on the Linksys router did the trick!

  From and upward... FINALLY!

• Wireless printing to a printer via linksys router.

  OK, let's go.

  I have a MBPro, OS X 10.6.2 connected wireless to a Linksys wrt300n, a Dell 2400 XP Professional desktop computer, connected via RJ45 to the same router and a HP Office Jet 6310 all in one, connected via RJ45 to the same Linksys router.

  My problem is that I can't print wireless from laptop.

  The devices can ping each other (so Im assuming they can all the commmunicate, and it isn't a firewall problem). The laptop sees the printer, it can connect to it, see the functions of administrator, he can see the power levels and network configuration settings, it can not all just print anything.  The laptop can print when you set up as a standard printer (not wireless, but wired).  When I add it as a wireless printer, it says 'network host ' 192.168.1.101' is busy. retrying in 10 seconds".

  I contacted Linksys and they do not feel it is a problem of router, so I wonder if this is the way Im set up the printer (configuration, c, PPI vrs DLP).

  Can anyone help?

  Thank you

  Ok... I figured it didn't off... no need to answer.  I noticed that there was another protocol to use to set up the printer on Mac, I was using LPD, so I switched it to HP Jet Direct-plug, and it prints fine... Thank you.  I'm curious to know why wouldn't LPD; If someone has that answer, I'd like to know... Thank you

• Linksys router page does not render correctly

  recent upgrades of firefox do not allow a normal display of a linksys router page mode.

  missing text, missing items of choice.

  the items that appear are selectable, but it is a subset of a correctly rendered page.

  It worked correctly before,
  all the cleared cache.
  ABP and scriping turned off.

  more information, ABP was the culprit, deselection on page
  Fixed rendering problem.

  .. Never mind... (Emily Lietilla)

  Jr