stack of sg500x - you can LAG stacking ports?

Similar Questions

• You can activate the port 8080 to access by browser first Infrastructure 2.0?

  By the official document, port 8080 is pre-defintied for access by browser, but it is disabled by default.

  I found a way to activate the port, but I can't find any guide on the cisco site.

  Anyone know how to activate the port 8080?

  Thanks in advance.

  Louis

  HIi Hoi;

  According to the document from cisco: http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/administrator/guide/config_server_settings.html#wp1082023

  Configuration of server settings

  The server settings page allows you to enable or disable the TFTP, FTP, HTTP, HTTPS, or compliance department. To activate the server settings or disable:

  Step 1 Choose Administration > the settingsof the system.

  Step 2 In the left sidebar menu, choose the setting on the server.

  Step 3 If you want to change the directories FTP and TFTP or HTTP and HTTPS which had been established when installing ports, enter the port (or port number, and root if necessary) number that you want to change, and then click enable or disable.

  The changes are reflected after a reboot.

  I don't know, but try to change the port 8080 number in the HTTP forward option and save it, then restart.

  I think it will work.

  Concerning

  Remember messages useful rates

• IPS Inline Mode Interface - you can use a port channel?

  Hello

  I am trying to determine if you have a 2-gig Layer 3 Port channel through a 4260 IPS appliance. See the attached diagram. Is this possible?

  The customer, I work with would prefer not to enter this cost equal to Port-Channel 1 gig of links (I don't think that there is a difference in performance...) However, I think that if they want the device inline, as the diagram shows - they will have to break the port-channel. Is this a correct assumption?

  Thank you

  Brad

  Asymmetric traffic will prevent the sensor works best, he is capable. There is a configuration that can be done to allow the detector deployed in an asymmetrical environment, BUT it can affect the ability of the sensor to detect attacks, allows through evasions which would have been prevented and will not affect general performance of the sensor.

  If running in unbalanced mode should be avoided if possible. BT in cases where it cannot then the sensor always allows with degraded functionality.

  Traffic spikes above what the sensor can manipulate at will cause ignored packets. There is no help for too much traffic.

  The relief you talk I guess is the bypass function. The bypass feature does not affect during the subscription of the sensor. The bypass feature will only kick if the analytical engine crashes due to a bug.

• You can create 2 ports vmotion?

  Hi, is it possible to create 2 vmotion networks using different subnet / vlan?

  If so, how do you determine which network is used when a vmotion occurs?

  Say a vmotion network breaks down, vmotion will automatically use the 2nd vmotion network?

  Thanks in advance.

  Welcome to the Forums - no, it is not possible for an ESX host to have two vmkernel vmotion enabled-ports

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• You can change the manual HTTP Proxy on windows 8 / Surface Access Sever, Port, and authentication

  On the iPhone and iPad, you can go on the Wi - Fi connection settings tap modern you have.  After that, you change the HTTP Proxy in manual.  Once you press it, you can put server, port, and authentication that put my school.  You can access these things on Windows 8 or the Surface Pro?

  I need to connect to the school for Wi - Fi to access the internet.

  Hello

  To change the proxy settings, try the following steps.

  (a) press the Windows key + R, type inetcpl.cpl , and then press enter.

  (b) click on the connections tab, and then click LAN settings.

  (c) put check Mark to use a proxy server for your LAN check box.

  (d), and then make your changes in the settings. You can also click on the Advanced tab for more options.

  (e) after making necessary changes click on apply then Ok to save the changes.

  Check out the link for more information.

  To connect to the Internet
  http://Windows.Microsoft.com/en-in/Windows-8/connect-Internet

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• WARNING: Incompatible Arg. You can't use stack Variables If generating series is not defined

  What does this message mean?

  "WARNING: incompatible Arg. you can't use stack Variables If generating series is undefined."

  Where can I put generate series only?

  Thank you

  Derek

  Hi Derek,.

  Not all LabVIEW C Generator settings are compatible with each other. In this case, you must define generate series only (aka 'disable parallel execution') If you want to generate the code uses the variable stack.

• You can configure LACP in a stack with SG500

  Hi guys,.

  I'm looking to buy 2 x SG500-48 switches with the stacking cables and connect them in a stack ring topology.

  My reason for wanting this is so we can configure connections LACP of our servers in hyper-v to 2 stacked switches so the we have a redundant network connection if one of the switches is to fail. You can configure LACP links on stacked SG - 500 switches to be in the same group/link?

  Can of course

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• SNMP for stack Ports on Dell 6248? (xg1... 4)

  I have 5 x 6248 stack in a ring... I can see the counters of Point of battery through the web INTERFACE.  I use munin to graphics system attributes, and it finds all the regular ethernet ports on each device, but not ports of the battery.

  A snmpwalk example will show, for example:

  IF - MIB:ifDescr.47 = STRING: unit: 1 location: Port 0: 47 Gigabit - level
  IF - MIB:ifDescr.48 = STRING: unit: 1 location: Port 0: 48 Gigabit - level
  IF - MIB:ifDescr.49 = STRING: unit: 1 location: Port 0: 49 10 G - level
  IF - MIB:ifDescr.50 = STRING: unit: 1 location: Port 0: 50 10 G - level
  IF - MIB:ifDescr.51 = STRING: unit: 1 location: Port 0: 51 10 G - level
  IF - MIB:ifDescr.52 = STRING: unit: 1 location: Port 0: 52 10 G - level
  IF - MIB:ifDescr.53 = STRING: unit: 2 Slot: Port 0: 1 Gigabit - level
  IF - MIB:ifDescr.54 = STRING: unit: 2 Slot: Port 0: 2 Gigabit - level

  These 10G are the optical ports at the front of the switch, but I can't find anything for my friends in the back of the switch.  I'd like to think the ifDescr soar "Slot: 1"... tips on how to find the correct OID?

  Thank you

  -danny

  You can try the following traps:

  agentInventoryStackPortTotalErrors.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.10

  agentInventoryStackPortErrorRate.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.9

  agentInventoryStackPortDataRate.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.8

  The categories look the same as the list of counters.

• Aggregate bandwidth of Sg500 two stacking using two stacking ports?

  Is the 2 Gbps of bandwidth when you use two stacking ports to connect the two switches?

  Two if you want that quick failover. Otherwise, a failure of the link will lead members of the dislocation pile. For the SG500, they go on S3 and S4. On SG500X, they go on S1 and S2.

• 3548 stacking ports... Fiber?

  I noticed, under system, advanced settings, General settings, there is an entry of stackable port with the ability to select the copper Ports or fiber.

  35xx switches can now use fiber for stacking ports?

  Someone at - it tested?

  An excerpt from the user for the 3500 model switch Guide.

  

  The front includes number of ports RJ-45 24 1-24. The top row of ports is marked with odd numbers 1-23, and the bottom row of ports is marked with the numbers 2 to 24. In addition, the façade also contains ports G3 - G4, which are copper ports and ports G1 - G2 which are fibers. G3 - G4 ports can be used as ports for stacking or used to transfer a standalone network traffic.

  I can spend some time looking into this.  At the moment it does not look like that is possible. I will update the post with all possible information that I can find.

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• When I try to play a CD/DVD it works but it does not open the file, you can not see or hear something

  Cannot get the CD/DVD player to play

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• can I connect port 2 of my WLC 4404 in my dmz for access to guest user

  Hi all

  My script is

  Cisco wlc 4404, with 20 access points, I want an internal client wlan and wlan of comments, I configured the VLAN and WLAN, but would be possible to have all the internet traffic for customers going to port 2 on the controller of the demilitarized zone of my firewall? How I would get this job, coems from traffic to the ap through a port on the controller.

  Help, please

  see you soon

  Carl

  Carl,

  You must have two interfaces AP-Manager because you connect physically two ports of distribution on the WLC.  When you do this, you must use LAG (that you can not do in the case because you connect to two different switches) or have an ap Manager assigned to each port (this is how you can have the switch redundancy).  So yes, it will allow you to do. Please see the link guide to config I have sent for more information on the use of multiple ap interfaces - manager.

  The WLC knows that he has to send the traffic comments port 2 because WLAN guest is assigned to the interface of comments which, in turn, is assigned to port 2.

  Again, I strongly recommend that you open a TAC case, so you can speak with an engineer and discuss this because as you can see, it can be bit confusing

  Lee

• You can batch select text

  I have about 5000 .psd files which each having several layers of text.   I need to delete all the text layers in each of 5000 files.  If anyone knows if there is a way to do this automatically through a batch process?  I'm unable to find a way for photoshop to automatically discover what are text layers so I can create an action that automatically deletes them.  Does anyone know if a feature like this exist?

  Thanks for your help

  Not really, you could possibly use Select-> similar layers but your documents everyone should have at least a text layer in the same position in the layer stack so that you can select which by your action.

• You can swim or shower with the watch

  You can swim or shower with the watch?

  Hello

  Non - Apple advises that you perform one of the people.

  Apple Watch is splash and resistant to water, but it is not waterproof. You can, for example, wear and use Apple Watch during the year, in the rain and all washing their hands. Overwhelming Apple Watch, however, is not recommended. The watch must also be dry if it is wet.

  Apple advises specifically, for example, the following can affect Apple Watch water resistance and should be avoided:

  • Exposing Apple Watch into water under pressure, including under the shower.
  • Swim or bathe with Apple Watch.
  • Overwhelming Apple Watch in water for long periods of time.
  • Apple Watch port in the sauna or the hammam room.

  Water resistance is not a permanent state, and Apple Watch cannot be rechecked or closed for resistance to water.

  More information:

  On the resistance to water Apple Watch - Apple Support