stack overflow after upgrade CVI9.0 for 2010

Similar Questions

• G480 - cannot start Dolby Home Theater after upgrade Windows 10 for g480

  Does not start after upgrade to window 10 for my portable home dolby cinema g480. can anyone help? cannot find the driver on the Lenovo Web site

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Dear Sir

  Welcome to Lenovo Community

  There is no driver for windows 10 for your machine but let try 2 ways, all first try to install the windows 8.1 driver it may be helpful (see below):

  http://support.Lenovo.com/eg/en/products/laptops-and-netbooks/Lenovo-G-series-laptops/LENOVO-G480-No...

  or try the same 10 windows-compatible driver from the below link from driver identifier (when you open the link you will be asked your name & e-mail, you can use fake ones then next page choose non-commercial usage and then from the first link, hope this will work with you,

  http://www.driveridentifier.com/scan/download_file.php?URL=http%3A%2f%2Fcdgenp01.CSD.Toshiba.com%2fc...

  If its is not working so the best solution is to go back to the previous version of windows

  awaiting your response

  Good luck

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Shared failure records after upgrade of kernel for Ubuntu 8.04 LTS

  Improved 2.6.24 - 23-2.6.24 - 24 this morning and shared folders no longer appear under/mnt/hgfs.

  Go back to 2.6.24.23 and everything is ok. (The records are here).

  Workstation 6.5.2

  HOST Windows OS XP-32

  Guest OS Ubuntu 8.04 (64 bit) - latest patches applied

  uname - a

  B1-office-2.6.24 - 23-generic #1 SMP Wed Apr 1 21:43:24 UTC 2009 x86_64 GNU/Linux

  You have to rebuild the VMware tools modules already?

  Call ' vmware-config - tools.pl "to recompile them.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• The constant message, a "stack overflow in line: 0" and I can't use the computer at all.

  Help!  All morning I get this pop up message.  He completely freezes my computer so I can't do a thing.

  Help!  All morning I get this pop up message.  He completely freezes my computer so I can't do a thing.

  I'm no expert in this issue.
  Just to let you pass one of the many possible solutions to your problem...
  Take a look at this tutorial.
  Note: The tutorial menioned IE7. The instructions apply to IE8 and IE9 beta as well.
  Stack overflow in line: 0 tutorial For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 license after upgrade of Windows 8

  Hello!

  I originally had this question in response to a similar question replied, but after a few days without response, I decided to re-post this on its on.
  I have an edition OEM Windows 7 Professional 64-bit install on my laptop, that I intend to upgrade to Windows 8 in the coming days. I also sell a car built desktop, so I can buy a tablet of Surface.  Q: after upgrading my laptop for Windows 8, which "releases" the license of Windows 7 so that the software can go with the desktop if I find a buyer, and they want to use it?
  NOTE: I'm not charge what for the operating system and it's completely optional. I don't want anyone to think they could get non-genuine Microsoft Software. I do not have the original packaging, but I have the original disc and the sticker with the 25 digit key.
  Thank you!
  RK.

  OEM licenses are not transferable, they are tied to the computer first that they are installed on the.

  --------------------------------------------

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Unable to access iBooks Store for iPad after upgrade to iOS 9.3.3.

  We do not seem to access my iPad iBooks store 2 Air or my wife Mini 4 iPad after upgrading iOS 9.3.3 machines. When you click on any of the icons store across the lower part of the application, we get a blank white page. We can access all our books purchased on the iCloud, but cannot look for first timers. The iBooks app seems to work normally on my iPhone 6 after the iOS upgrade. Anyone else has a similar problem?

  Yes. Double-click the home button on the iPad and the iBooks app sliding upwards and out of the screen to close.

  Click on the home button to return to the home screen, then hold home and power/sleep buttons for 10-15 seconds or until the Apple logo appears.

  Reset draw iPads. Let them restart and try opening the iBooks App again.

  No data should be lost by the present.

• Cannot change the passphrases for wireless network after upgrade

  Hello

  I just upgraded the firmware for my R7000 and after that (I think) it not possible to change key phrases for the parameters without wire and I cannot see what that the security is WEP WPA etc.

  A few ideas...?

  Best regards Thomas

  Reset the default router and reconfigure from scratch.

• OfficeJet Pro 8000 - is no longer prints borderless print after upgrade - Tiger for the Mac Snow Leopard

  Mac OS X 10.6.8

  HP Officejet pro 8000 A809

  Wireless

  HP Photosmart Studio v. 9.7.4

  After upgrading from Tiger to Snow Leopard I lost the ability to print without MARGINS - until that time, that I had no problem.

  I use HP Photosmart Studio to print, but get the same error every time: "the selected printer supports the paperwork without borders. If you print, will serve the maximum printable area of the current paper size.

  I downloaded the most current driver after that I improved and I was able to print in general - when I try to select borderless printing it tells me that this printer does not support. I was able to print without margins using Creative Suite Indesign and printing of this app--but have lost the functionality of the HP Photosmart Studio is really a drag - since I have to do all sorts of adjustments to do workaround printing.

  Is it possible to upgrade Photosmart Studio? or re-start it? I'm lost and need help.

  Thank you

  If you always reminants of the HP software meant for 10.4, you must uninstall the software by using the "scrubber".  If you have already uninstalled, reinstall from the CD, then:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Need Switchable Graphics for Windows 8 after upgrade?

  Hey guys,.

  I see several issues where people lose their switchable graphics after upgrade to Windows 8.

  Now, the only drivers graphic switchable which must be downloaded for future needs on the site of the factory which should be HP.

  Now, is the first step, we want to take

  • Check and see if your mobile phone is supported by Windows 8.

  You can check HERE to see if it is supported.

  If this isn't the case, then more than likely there will be no available drivers until the phone is supported.
  • If the laptop is supported by Windows 8 HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.
  In addition, there are several places where you can find ' workaround ' meaning drivers, you can download switchable graphics 3 third-party sites. As AMD and Other installs

  Other facilities

  It will be the call to users to go and download these drivers. Now that could be a hit or miss.

  SO BE VERY CAREFUL OF ANYTHING TRY YOU AND DOWNLOAD IMITATING SWITCHABLE GRAPHICS DRIVERS.

  THX

  I hope it's useful!

  THX

• Looking for a 'how-to' guide reinstall Windows Vista after upgrading motherboard

  Original title: the motherbard and cpu upgrade

  I want to install (I hope) soon new motherboard and CPU and I was looking for how to guide to reinstall vista after upgrade of the motherboard. Is it possible to get to the office without big hazzle and start reinstalling from there.

  In fact, I want to reinstall vista because I think it's much easier to try to record all programs and other settings.

  I tried to use already search funtion and it did not the asnwer I was looking for.

  I have oem (at least it says in the box) version of vista 32 bit.

  If the motherboard is exactly the same or almost exactly the same there should be no problem.  Otherwise you will want to completely reinstall Vista or even your system will contain drivers for the hardware is no longer present or missing drivers for the new hardware on the motherboard.

  "illuknisaa" wrote in the new message: * e-mail address is removed from the privacy... *

  I know how to reinstall Vista (I did this couple times) but I don't know how Vista reacts when a new motherboard is installed. I just need to reactivate vista or even will I get to the office?

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• After upgrading to MAC Mountain Lion, the drivers for my HP C4680 were removed (accidentlly)

  After upgrading to MAC Mountain Lion, the drivers for my HP C4680 have been deleted (accidentally). I downloaded the drivers from HP, but my Macbook it not install because the drivers are not available on Mac Store. How can I get the printer installed?

  Hello

  First of all, make sure you restart your Mac, and then try to add the printer again.

  If it persists, ensure that the USB port directly connected to your Mac and not via a USB hub or extention.

  Ensure that the USB is not longer than 2 m and check to see if that can help you.

  Also, if you have an iMac, be sure to plug the USB in the port at the back of the Mac and not in the Apple keyboard, which is not powered.

  Also, try to reset the printing system, then try to add the printer and check any changes:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and try to re-adding the printer.

  If none of the steps above does not lead to any progress, go to the library and place the HP folder to the trash.

  Enter PPD\Contents\Resources, search for C4600 and move the files to the trash, then try to add the printer again.

  Hope that helps,

  Shlomi

• problems VMWare player after the upgrade of windows7 for windows8

  Hello!
  Is it normal to have problems with wmware player after the upgrade of windows7 for windows8?
  first: it was impossible to have lunch at any guest host, I change the value of this line: "vmci0.present" from true to FALSE to start
  and then now, I have no network to all hosts in comments, I tried with the bridge and the NAT mode, it does not work
  and I found this error in the log file:
  VMX | I120: [msg.dictionary.load.openFailed] could not open the file "C:\ProgramData\VMware\VMware Workstation\config.ini": an unknown error (0 x 2) of 2.

  After this file please - looks like a syntax error