Stacking mode grayed out

Similar Questions

• Satellite Z930 - mode boot Boot CSM and grayed out on the value

  Hello

  Hope someone can help me please.

  I have a Toshiba Ultra Z930 friends book.

  When you start the laptop does not start it comes up with the meesage PXE - E61: Media Test Failure.

  It is a Windows 8 portable 3rd Gen i7.

  I can boot from Hiren'S and the hard drive is located and can be selected and all files seem to be intact.

  I went into the BIOS and found that the startup mode is set to MSC Mode.
  However, Windows 8 requires the for UEFI boot mode.

  I can't find how to change the boot of the CSM Mode in the UEFI.
  The option is grayed out and cannot be selected.

  Help
  Please

  Hello

  Go to the BIOS by pressing F2.
  Then put the BIOS on the default settings, save the changes and power the laptop off.
  Then switch on the device and access to the BIOS, once more the key F2.

  According to my experience, secure boot option must be available, and you should be able to change the startup mode UEFI/CSM layout too.

• SRW2008P - Advanced QoS Mode is grayed out

  Hello

  QoS-section of the web interface SRW2008P I can choose between Disable and basic, advanced mode is grayed out.

  I created a new ACL but advanced QoS mode is not available.

  What can I do to activate it?

  -----------------------------------------

  Start the Version: 1.0.1

  Software version: 1.0.4

  Hardware Version: 00.03.00

  ------------------------------------------

  Any help much appreciated, thanks in advance!

  Hi, I also had this problem with the advanced QoS mode is grayed out in the web interface. A firmware update, many factory reset without success, very frustrating and disappointing as I too bought this switch for its QoS functionality. However...

  1 console Telnet to the switch, log in using your user/pass

  2. Ctrl-z to exit from the menu, you will get a > prompt

  3. type lcli - you will be asked once again in your credentials, it takes you in a familiar Cisco IOS-like CLI

  4. type conf - enters configuration mode

  5. type advanced qos - you will be asked to confirm it clears basic QoS settings.

  You can now create your class cards and set policies to interfaces.

  In fact, using the light CLI rather than the web interface to configure.

• Why is my picture mode and setting grayed out?... I can't make changes to documents

  Why is this grayed out. Picture mode and adjust the grey mentsare.

  If everything was normal, and for some reason goes wrong, I suspect that the settings of Photoshop file has been corrupted.

  Hold Cmd-Opt-shift and run Photoshop. Click Yes to delete the settings file and let Photoshop finishes loading. Let me know if this helps.

• Display the text in html option grayed out in canvas mode

  Does anyone know why is the rendering of text html option grayed out in canvas mode?

  Need of this option so that the text box, I created able to get dynamic content html from the server. Thank you

  Easeljs does not support html, text, yet.

  You can change that in the file js added, however.

• My styles in illustrator are grayed out although in RGB mode

  I would use the shadow effect in illustrator.

  But that - as well as most of the other options style - is grayed out.

  In Photoshop, which is managed by put in RGB mode and 8 channel bits, but it does not help in illustrator.

  I also tried different fonts because I thought that the effect may be simply not available at this special police but it stayes just in gray.

  This preset could I be wrong?

  Did you select the text with the pointer tool object?

  Or have you used the text tool?

• Modes of image and adjustments grayed out in photoshop CC2015

  Hello

  I know I have used CMYK and adjustments because I upgraded to CC2015, but now it is grayed out. When I upgraded, I noticed that I was getting the black boxes, which disappeared when I zoomed in and out, but still annoying. I found a fix for this, but change my treatment of graphics settings in preferences. Then my perspective string is grayed out, so I went to normal and that fixed, but now no matter what I do, CMYK is grayed out. I can convert to CMYK using an action that I put in place, but I would still like to use my settings.

  It is in fact a false alarm, I had a ton of doc. Open in PS and restarted PS and Modes are back. I would have thought to do this first.

  Just make my poor IMAC tired I guess!

  Well good if you found the solution and sure, depending on the RAM and how loaded your MAC is, some functions may be set aside. Sometimes my PS and 3D in order not to feel alone

• "Use all displays in mode full screen" is grayed out?

  Hello..

  I have two monitors on my Leopard system, with a guest of Fedora 11, but the menu item "use of all displays in mode full screen" is always grayed out.

  From what I've seen with Google, no one else on the planet is having this problem.

  Does anyone have any suggestions?

  Thank you!

  It is essential for just about everything... without it, Windows runs without no VMware driver, so not only will there be a drop in performance, but you do not get a large part of the expected functionality (copy - paste between / guest chef, acceleration 3d, folders; printers;)... basically it all depends on the installed VMware Tools...

• Cannot get standby mode, it is grayed out

  I have the model Dell Dimensions 4700, Windows XP.  When I want to sleep, I can't because this option is grayed out and I can't activate it?  Help, please.

  If you recently updated the drivers to go back to see if it corrects the problem.

  If you recently attached all new devices disconnect.

  If you recently changed devices such as keyboard, mouse, etc., and the 'old' work always put the old ones back in.

• median stack mode

  I have cs6... not cloud subscription

  I want to stack Smart layers to reduce the noise... the battery option is grayed out

  I converted my files in Adobe RGB and 8-bit, but did not solve the problem

  It was suggested that my version of photoshop is the problem... If if I need to subscribe?

  You combined all the layers into a single smart object?

  Stack modes are only available in photoshop cs6 if you have photoshop cs6 Extended version.

  Go to help > about Photoshop (windows)

  or Adobe Photoshop > about Photoshop (mac)

  and see if it says Extended

  

• iPhone 6s more 'Phone noise cancelling' setting Grayed Out

  I have a 6 more than 128 GB iPhone running iOS 10.0.2. I can't activate the 'Phone noise cancelling' setting in settings > general > accessibility > telephone noise cancelling because it is grayed out. I have attached a screenshot for reference.

  I've tried hard restart my iPhone (Home + Power button) without success. Any help is very appreciated! Thank you.

  

  Hey there, Stephen Bond,.

  Thank you for using communities of support from Apple! I see from your post that your iPhone more 6s on iOS 10.0.2 does not work as expected because the cancellation of noise from phone toggle is grayed out. I'll be happy to help you.

  First check to see if the hearing aid Mode is enabled in settings > general > accessibility > hearing aids. If this option is enabled, then telephone noise cancelling will be grayed out as you describe. If this isn't the case and that the option is grayed out, please continue.

  How to back up your iPhone, iPad and iPod touch - please backup your iPhone to ensure that your personal information is safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - this process will completely erase the iPhone to allow a new copy of the iOS to install. The first time, select "set up as a new iPhone. Once your iPhone is back to the home screen, check the setting of the new. If everything works as it should, use the "restore from backup" link in the section «Get help» If it is not, under the same article, "Contact Apple Support".

  Take care and have a great day!

• Cannot change the parameters, they are grayed out

  I am in my account on Firefox version 38.0.5 and when I go into my settings, I need to change the but they are grayed out. How do I get this so I can edit them? I went into the preferences of Firefox, then down to privacy and want to make some changes, but some areas such as clear history when you close Firefox is gray. How can I make changes in Firefox?

  Thank you all who replied to me.

  You have a check mark on the mode of private browsing permissions setting ('always to use the private browsing mode').

  You exit PB to be able to use all the settings that are currently blocked.

• Why is my 'Save password' grayed out? I want TO save the passwords!

  Why is my 'Save password' grayed out? I want TO save the passwords!

  This can happen if you're in private browsing mode.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

• iTunes restore remains grayed out

  With the help of iTunes (for Windows) ver 12.4.1.6.  Backup on computer. {iPhone IOS iPad IOS 9.3.2} 9.3.2,and

  'Restore it backup... ". "remains grayed out. This is for the iPhone and iPad. Problems with the iPad. Do you have a "forced Restart" with iPad connected to iTunes to put it in Recovery Mode. Tried to restore. NOTHING is there - system, but NONE of my apps. "Restore backup...". "gray. Last backup said "your iPad has never been saved on this computer." False, I voluntarily did several backups last week I got the iPad back and running.

  Try to check the problem with the iPhone. "Restore backup...". "gray. Last backup said "your iPhone has never been saved on this computer." Fake. Click on "back to top". Look at him through his 5 steps. At the end 'restore backup... ". "becomes momentarily available and then returns to be gray.

  What is going on??? How can I return my previous backups? Can I get back them? If the iPad backup file has been altered, why has it taken out backups of the iPhone?

  Help, please. Thanks in advance.

  Make sure that iTunes is up to date.

  Mac

  1. Open iTunes.
  2. In the MenuBar at the top of your computer screen, choose iTunes > check for the updates.
  3. Follow the prompts to install the latest version.

  Windows

  1. Open iTunes.
  2. In the MenuBar at the top of the iTunes window, choose Help > check for updates. Learn what to do If you see not the menu bar.
  3. Follow the prompts to install the latest version.

• Remember passwords box grayed out. How to check the box?

  When I started using the newest Firefox browser with my HP desktop computer, with Windows 8.1, I'd get a popup asking if I wanted the name of the Web site and the password to be saved. It worked fine for awhile, but now I have no popup message asking if I want to recorded information. In addition, on the page with the saved current info the box asking "Remember passwords for Sites" is grayed out. Can someone tell me please how to fix this problem, so I want to type in the info at the signing mainly Facebook and games sites. Thank you

  Hello, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track