Standby power 7 Tecra 9000

Similar Questions

• Tecra 9000 USB port failure

  Hello Helpers,
  My Tecra 9000 IGH with Windows XP model has two usb ports dead and taken from mouse. From what I've read, it's a defect with this model. The USB ports are on a separate module that is plugged into the main Board.

  Is the fault on the set of the USB module or on the main Board or the fault lies in the power plug. Is the fault of the joints for example dry easily repairable, where a quick touch of a soldering iron can redo them. Does anyone have a circuit diagram which would make tracing easier fault.

  I had partially circumvents the problem by using a USB card, but this often causes freezing the computer and my laptop hard drive will not work with it.

  Any help appreciated.
  Linlithgow your sunny.
  Derek

  Hello Derek

  On this path, it is not easy to say what the problem is here, but I guess there is a contact problem. It is really not easy to say it's the problem motherboard or separate module itself. I think that it should be checked on professional way.

  The second problem is the scheme of construction. As far as I know that is not a public document and you'll be lucky if anyone has it for you. I know that you will not be satisfied by my suggestion, but I think the best way is to communicate with the technicians and talk with them. Maybe there really small problem and can be cheaply repaired.

  Good luck!

• Tecra 9000 - DC led flashing light 01001110

  I have a problem with my laptop, it's a Tecra 9000. When I press the button start power
  Tour LED from yellow to orange. Then the LED flashes 8 times. SLSSLLLS = 01001110. Peut
  can you tell me what this error code means?

  Thank you for all your answers

  Post edited by: fanatic

  I solved the problem by connecting the 2 PCBS together.

• Tecra 9000 - LED flashes and cannot start

  I recently got an old laptop Tecra 9000. Unfortunately, it doesn't have a HARD drive (it was taken and sacked by the former owner).

  I bought some hard drives that I thought should work in this machine, but all that seems to happen is that the power light blinks 7 times, pauses, then flashes once (and then repeat this.

  I guess it's an error code any.

  Readers, I've tried are a MK4025GAS and a MK4026GAX. The result is the same on both.

  Can we say what means this error, or even tell me the part number of a disk that is compatible with this machine?

  Thank you very much.

  Hi Guy

  One question; have you tried to power the laptop without inserting the HARD drive?
  Usually if the laptop is ok, it should be possible to boot the laptop. Of course the laptop will not load the Windows operating system because the HARD drive is missing but it should be able to start and the led must Flash not!

  But if it flashes, it means that the fault was detected on the motherboard and the LED lamp sends a blink code.
  Short blinking means 0 and 1 long flashing
  Error code starts with LSB (least significant bit)
  for example:
  0000 0001-> 1000 0000

  This code you need to turn it into hex and you will get the error code.
  But in my opinion, no one will give you an answer what it means.
  Each laptop clean error code series offer...

• Can't turn on my Tecra 9000

  Hello I can not turn on my Tecra 9000. If I press power button power LED only concern. What can I do? Greet Jürgen

  Hello

  Remove the battery, connect the device to the power running and try again.

• Issue when installing fresh Windows XP on Tecra 9000

  I have a Tecra 9000 running Linux.

  I would like to install windows XP but the Setup CD I charge readers and then crashes to windows is the loading screen. I have no recovery disks or driver for this computer as I bought it used. and I don't know why he struggled.

  The SN for the unit is Z1086914G ST900-0.
  I have read forums about similar problems and think it might be the chipset driver for the HARD disk.

  I can't find a driver for nowhere so I can't try this line of thinking.

  Anyone has any ideas.

  Hello

  As I remember the Tecra 9000 does not support RAID or SATA controller that would require RAID or SATA drivers, so I put t think that your problem is related to the missing driver

  Have you tried to install Win XP SP2 from container?
  Are you sure that the HARD drive is OK? I think you should check the HARD disk for some problems initially.

• Tecra 9000 - BIOS block 1 damaged

  I have a Tecra 9000 with a broken BIOS.

  I looked at upgrading the BIOS FAQ [1] and searched the forum (found [2]). However, I have no Windows installation and at least my Toshiba Tecra 9000 doesn't have a floppy drive, so I can't follow the procedure described here.

  You will find my update of the BIOS for the laptop with the serial number 32222375G: http://de.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=DE&userAction=SMP_RESU LTS_PAGE & partNumber = PT900E-08YZG-GR & serialNumber = 32222375 G & USER_ACTION = Serial % 20num ber

  So, what should I do?

  BTW: I can't real poster on this forum. I can't post the exact BIOS error message because the forum software claims that I used profanity. The relevant part is contained in the subject line of the thread.

  [1] [http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 |] http://EU.computers.Toshiba-Europe.com/innovation/FAQ.jsp?FID=TRO0000000b07]
  [2] [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0]

  Hi uAyjYdKT,

  Download a version on diskette in the bios called "trad.
  -You can always start your machine?
  -You can install anything on hard drive?

  If both answers are Yes, follow these steps:
  -do a back on your hard drive installation (this can be done on another machine)
  -unzip / uncompress the bios disk do a hard drive
  -Insert the hard drive of your machine and run the bios update

  If the responses were not: see one servicepartner to have made

• Speakers just stoped working on my Tecra 9000

  Any 1 can help me?
  My speakers just stoped working on my Tecra 9000 and I tried the update for the sound.
  My drivers are up 2 date. I tried all the fixes everything... Please help

  Hello

  What you connect the headphones?
  You hear something?

  Did you check if mute is not activated?

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Sound problem with Tecra 9000 on Win XP SP2

  Hello!

  First! Excuse me for my English!

  I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

  I read a few post on the forum, but I can't solve this problem.

  Could someone help me.
  Thank you!

  I think this doc Toshiba should help you:

  [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

  There is a link to a driver that should help to address this problem.

• How to change minPCI WLan on Tecra 9000

  Hello

  I have a Toshiba Tecra 9000 with 11b wireless.
  I bought a minPCI 54g card, but I don't see where is the mini on the Tecra 9000 pci card,

  My question is how do I change the WiFi card mini pci please?

  Thank you all

  Hello

  I think that if you can't find the WLan slot at the bottom of the unit, then it must be hidden somewhere under the keyboard!

  The keyboard is usually fixed with two screws that are hidden under a thin plastic above the F1 - F12 buttons cover.
  If you remove the two screws, you should be able to loft the keyboard.

  But be careful; It s to connect to the motherboard with a flat cable

• Tecra 9000 - error message with Windows XP SP3 home edition

  Hello

  I have a Tecra 9000 in very good condition, until yesterday, I have no problem!
  After updating my Windows XP service pack 2 on the "service pack 3", everything works fine but when I press the button 'TOSHIBA controls' and 'mouse' for setting, Windows error message occure: "run a dll as an app"!

  Even if I go to "Start" and "Control Panel" and press the mouse, after setting close icon, or just simply do nothing (cancel), the same message! I did not notice any other problem with the TOSHIBA utility!
  My driver for mouse is "Logitech mouse ware, 9.40! Can you help me?

  This oldie works well with Windows XP SP2 home edition and in my opinion you should use without SP3. Try to remove the SP3, and I hope that everything will work properly again. Problem is that the old tools and utilities designed for Toshiba probably aren't tested and updated to SP3.

  I have more Satellite M70 and use sill with SP3. I don't want to risk anything and have problems.

• Tecra 9000: Problems with 2nd Battery Pack in Slim SelectBay

  Hello

  When I insert the second battery (PA3074U-1BAT) in Slim Select Bay the battery does not charge and is not recognized by the Tecra 9000 laptop: status led on the front is not lit.

  If I insert the DVD of Tecra drive for example, everything works fine.

  I know that the battery is 100% working since I put it in another Tecra 9000 occurs flawlesly.

  Why doesn't the laptop to work with the second battery? Any ideas?

  Thank you.

  Hello

  I put t knows exactly why the second battery does not work in your Tecra 9000, but I found another display created by your all about this Tecra 9000 and looks that you have disassembled the laptop, and maybe you have damage or not connected something.

  In my opinion, every single computer laptop part should be checked again!

• Tecra 9000 - left speaker does not work

  Hello

  the left speaker of my Toshiba Tecra 9000 no longer works.
  Strangely, the right one still works perfectly.

  As far as I can tell this is not a problem concerning the links between the speaker and the motherboard.
  I disassembled the laptop to check if the connection and firmly plugged it.

  Any ideas what the problem may be?

  Thank you.

  Hello Peter

  As I see that you started several threads with different themes on your old Tecra 9000. I don't know where the condition is your Tecra but according to your assignment, you have disassembled the laptop integer. Have you taken some disassembly instructions or you did at your peril?

  What about the speaker? Check all sound settings or player settings you use. Maybe left speaker off ot the sound is set to the right speaker only. If nothing is done it is possible that left speaker is defective. Tecra 9000 is old enough for laptop and everything is possible.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.