Start a synchronization of a step in a process workflow

Similar Questions

• difference of initial value of string between the steps in the process and an external instance of LabWindows/CVI

  Hello

  I'm curious to know what I see using TestStand, LabWindows/2013 2013 with regard to initial in TestStand string values when you perform the steps in the process or an external instance of LabWindows/CVI.

  I have a step (CVI) string value that is used to check an array of characters stored in an EEPROM to test.  I pass on the Step.Result.String in the CVI by reference.  I then read the table charater of the EEPROM in the chain (Step.Result.String).  The string is then compared against the limit as specified in the test step breast.

  When I run this test step to perform the steps in the process selected in the popup Configuration of the adapter of LabWindows/CVI, it seems that the memory allocated for the string is filled with null characters.  Which is what I expected.

  When I run this test step to execute the steps in an external instance of LabWindows/CVI iselected of the Configuration of the adapter of LabWindows/CVI popup, it seems that the memory allocated for the string is filled with something else.  That is not what I expected.  For example what I see in the memory, it's the first characher is one byte NULL but the remaining bytes are some other values, as shown below:

  F0 00 AD BA 0D F0 AD BA 0D F0 AD BA 0D AD BA 0D AD BA 0D BA 0D AD F0 F0 F0
  F0 AD BA 0D F0 AD BA 0D F0 AD BA 0D F0 AD 0D AD BA 0D AD BA 0D F0 F0 F0 BA...

  In my code I make sure to write a null character in the following location table charater I just write in the chain so I have no problem with the test is working properly.  I have remove the writing from my code null character and was able to verity that the test passes when executing the steps in the process and fails during execution of the steps in an external instance of LabWindows/CVI.

  The returned string contains what I wrote for her, and then the rest of the string is filled with the values that are in the memory allocated for the string.

  Here's my Question: is this the expected behavior for the original string values in TestStand between both types of stage performances?

  Thank you

  Chris Young

  In general teststand not Initializes the unused portion of the string buffer, so it is expected that the values of the memory after character no endpoint will be different, or even to each call. If you happen to be get zeros after the null terminator which was probably due to random character (i.e. the memory allocated just arrived already having zeros in there) or perhaps a debug setting you use perhaps in the Visual C runtime (if you are debugging the process in visual studio or modify visual C runtime heap parameter). TestStand is not initializaing memory after the null terminator character in both cases (I checked the code).

  -Doug

• CC does not start the synchronization of the base

  I get just problem after problem with creative application of cloud, so I installed a new system of Mac app and again immediately the problems. This time I get the message "Failed to start Coresync - could not create/library/application support/adobe/coresync. I can not connect I just want to get my Lightroom and photoshop work and have downloaded all the files Adobe etc, I uninstalled the CC using the correct way and install new-but once again the problems. Can anyone help with this software.

  It's the solution... did and it works, simply:

  Please follow the steps below:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator.

  Then indicate ""& read/write " currently logged in username and Administrator option, permission."

  Click the gear icon and select apply to closed. Close the dialog box information .

  Then, try to install creative cloud app, you should be able to install,

  Still face any problem? feel free to post

• How to get to Lightroom to start the synchronization again of the Mac desktop application?

  Lightroom stopped syncing my iPhone and iPad two days ago. After you add about 15 photos to a folder sync they would still show the synchronization in the desktop application after more than two days (3 points under the arrow on the way into the upper right corner of the thumbnail). When I go to view on the Web that are not in the web view so I'm almost certain that the pictures do not out of office. If create a new synchronization would be the folder on the desktop, the file syncs on IOS devices, but none of the photos in the folder are synchronized.

  I tried but doesn't work:

  • Create new folders and synchronize them
  • Put "Link with Lighrtoom Mobile" / off voltage
  • Identify yourself or/preferences
  • Lightroom (which displays a message that phots are syncin) to exit and restart
  • Restart the Mac.
  • Remove and reinstall Lightroom

  I'm on OSX 10,9.3.

  Thanks for any help.

  Steve

  Hi Guido,

  Last night after I posted my question, I found another thread where you said to delete sync.lrdata. I did and that fixed my problem.

  On Mac, it's to /Users/Library/Caches/Adobe/Lightroom/Sync Data / Sync.lrdata

  I spent a lot of time on this hunt. I would like to know as it's much more accessible from the main page of the help.

  Thank you

  Steve

• How can I format my Macbook Pro? I am first timer for formatting the Mac after using it for 5 years. Could you give the steps in the process of formatting? Thank you

  How can I format Macbook Pro OS X Yosemite 10.10.5? Could you give me the steps of formatting?

  -Backup of data you want to save

  -Start in Recovery

  OS X: on OS X Recovery - Apple Support

  and then format the boot disk and resinstall OSX via recovery

• I had a loss of power, and now Firefox does not start on my XinXP machine. In the process of list is firefox.exe, but no window always opens

  I have Firefox and Thunderbird - both Act the same. When I double click on the exe icon, a process starts, visible in the Task Manager, but no application ever does appear, in applications, or no appaears window. Both worked earlier today.

  Tried the checkdisk - no help.

  I uninstalled (in safe mode because the uninstall program wouldn't work either) of the software of the printer, and then reinstalled as.

  After that, thunderbird and firefox have both worked very well. Part of Windows must have got dirty up/stuck by being apparently corrupted printing software. Printer icon never showed up. Firefox and Thunderbird must have tried to read printer data at startup and hung out to dry...

  Thanks for the quick reply

• Aspire 5943g could not start due to failure of the interactive logon process

  When starting my Aspire lap top the message "interactive logon process initialization has failed. For more details, please see the event log"However when 'OK' message, it just returns after 15 seconds so am in a loop of default. When trying to reboot in "safe" mode it shows the same message. I tried pressing the Alt and F10 keys together on first but nothing happens before the message appears. Is there a solution to this failure?

  Press DELETE to enter BIOS start, check whether the HARD drive on SATA devices, then check if the D2D option is enabled, then press F10, save and exit.

  at the next startup, press ALT + F10 and check if Acer erecovery begins.

• iPhone does not synchronize photos correctly

  Hello

  I use iPhone 6 and are having problems since iOS 9.3 update.

  I don't want to have pictures in iCloud or want to synchronize the photos app. I have a folder on my mac book: there are several subfolder and each holds a couple of photos and images.
  It worked well, but since iOS 9.3 files synchronizes any more. IPhone sync problems - I can't delete photos on the iPhone.
  I tried to solve this problem by creating a new empty a folder - but if I try to sync iTunes starts the synchronization process and fails with the message: iPhone could not be found, but the iPhone is still connected and hit anything the iPhone. Synchronization of an empty folder will not change the photos on my iPhone, or any change in iTunes will delete the photos on the iPhone.

  The last time, I reset my iPhone. I had a backup restore, and after I could synchronize photos from the new record.
  Now, I made an iPhone update iOS 9.3.3 and the same thing happens again...

  It's not funny, it's terrible... and no, I'm not impressed by apple. I want the Apple of comfort back, represented in the...

  Hello Steffen_R y..

  Thanks for stopping by the communities Support from Apple! What you describe, it seems you want to have your photos synced via iCloud. In addition, you do not want to delete some photos from your iPhone by syncing in iTunes 6. I know that I would be able to manage my photos on my own terms, and I will be happy to provide you with some resources.

  To start, we will make sure all your photos are imported safely to your computer, so you may lose important memories. The following article will guide you in this process:

  Import photos and videos from your iPhone, iPad or iPod touch

  Once we know your photos are safe, we can begin the process of disabling the feature photos in iCloud on your devices and setting up of your devices to sync manually content via iTunes. Let's start by disable synchronization of photos via iCloud. This article includes steps on how to turn off iCloud photo library and how to remove photos from iCloud:

  Get help with your iCloud photo library

  This section specifically:

  How can I remove iCloud all the contents of the library of photos to iCloud and my devices?

  To turn off your iCloud photo library, follow these steps:

  • On your iPhone, iPad or iPod touch, go to settings > iCloud > storage > storage management > iCloud photo library, and then select Disable and remove.
  • On your Mac, go to Apple menu > System Preferences > iCloud. Click on manage, select Photo library, and then select Disable and remove.

  Photos and videos will be stored in your account for 30 days. To download your photos and your videos on your iOS device, go to settings > iCloud > Photos and select Download and keep the originals. On your Mac, open the photo, choose Photos > Preferences, and select to download the originals of this Mac. You can also select the photos and videos you want tΘlΘcharger iCloud.com.

  You can also turn off the flow of My photos and iCloud, photo sharing feature. This can be done by the same way as above.

  Once that features photo iCloud is disabled on both your devices, we can turn our attention to iTunes. First of all, let us make sure that the Auto-Sync feature is disabled. Without your connect your iPhone, launch iTunes. From there, click on in the upper left corner near the Apple iTunes logo. Then click on Preferences > devices and make sure that there is a check mark next to 'prevent iPods, iPhones and iPads of automatic synchronization.

  Now that automatic synchronization is disabled, we will be able to connect to your iPhone and then work to remove all pictures from your camera. This resource provides steps on how to manually synchronize the photos on your iPhone, as well as how to remove all or part of your photos:

  Keep your photos safely stored and updated on all your devices

  I want to emphasize this section for your specific:

  Turn off sync iTunes

  If you want more pictures synced to your iPhone, iPad or iPod touch, turn off sync in iTunes and they will be removed from your device. You can disable synchronization for some of your photo albums or all of them at once.

  Stop the synchronization of some albums

  1. Open iTunes on your computer and connect your iPhone, iPad or iPod touch.
  2. Click the device icon in iTunes.
  3. Click on the Photos.
  4. Choose "Selected Albums" and deselect the albums or collections you want to stop synchronizing.
  5. Click on apply.

  Stop synchronization of all photos

  1. Open iTunes on your computer and connect your iPhone, iPad or iPod touch.
  2. Click the device icon in iTunes.
  3. Click on the Photos.
  4. Uncheck 'Synchronize Photos' and then click 'remove all '.
  5. Click on apply.

  Learn how remove photos and videos synced from iTunes when you can not access the originals.

  Take care!

• I'm having a problem with Itunes synchronization

  Hello

  I'll have a synchronization and backup issued upward my iPhone with iTunes in Windows 6. I use iTunes on windows 7 bit 63 and ios 9.21 12.3.2.35 on my iPhone6. Upgrade to ios 9.21 Tuesday. When I connect my phone to my pc, sync would start, but would end in step 4 "determining which applications to synchronize' with the following error message"iTunes could not backup the iPhone "iPhone" because the backup session failed. I tried to restart my phone, restarted my computer, but nothing fix it. I contacted apple support and the tech I talked to was suggested to use a 2nd test iTunes computer and my phone. I installed itunes on my windows laptop 10 and he syncd my phone backup perfectly. I was going to chalk up to an error on my Windows 7 machine until tonight, when my wife has connected his iPhone to her computer (Windows 7 643 bit even itunes version)) and she got the same error message. I have contacted apple support and spoke to a senior technician. We uninstalled iTunes, reinstalled but got the same error message. We tried can remove the lockdown folder, restart Windows and the iPhone, but still get the same message. Since my wife and I are having the same issue and iTunes works on windows 10, I think he'd be a compatibility problem between windows 7, iTunes 12.3.2.35 and ios 9.21. Has anyone experience this problem?

  I have exactly the same problem. I'm on Windows 10 trying to backup my iPhone Plus 6 and my iPad Pro, which have been updated to 9,21 IOS using the latest version of iTunes. I lost 6 hours of my life trying to solve this problem. I tried what you did, leaving me frustrated. I get the same error message right "iTunes could not back up the iPhone because the backup session failed" when you try to save. The synchronization gets stuck to "determine what applications to synchronize" followed by "iTunes could not back up the iPhone because the backup session failed". The only thing to do is to try to backup with my laptop which didn't leave a lot of hard drive space. I have an iPhone of 128 GB 6 Plus and pro with close to 100 GB to 128 GB iPad deposited in each it backup in a different computer is a pain. Even with the backup to iCloud.

  This must be a conflict with 9.21 IOS and iTunes 12.3.2.35. iTunes does not even recognize that I have updated to 9,21 on my iPhone and iPad and queries to update. Hope Apple finds a solution to this problem as soon as possible.

• synchronize contacts from Mac OS x Server for iCloud

  HI, I'm migrating to use another contacts (Daylite) back to iCloud and mac Contacts Manager. My main contacts are in Mac OS x Server and are configured for synchronization between Daylite and mac Contacts, so my iCloud is not my correct contact list. Can anyone help or point me to an article or a message describing exactly how to:

  -delete the contacts that I have currently in iCloud

  -import all my contacts of CardDav in iCloud and start again?

  I guess after that, to synchronize contacts between iCloud and mac Contacts, all I do is iCloud account active Contact "accounts"?

  Thank you very much

  Diana

  PS. I use mac OS X 10.10.5

  Howdy Diana,

  I understand that you're looking to remove all existing contacts from iCloud, and then import contacts from another service of Mac OS x Server to iCloud. The first step in the process is delete contacts to iCloud as detailed in the article below (note: multiple contacts can be selected via the SHIFT key).

  iCloud: remove a contact
  https://support.Apple.com/kb/PH12079

  Once your iCloud contacts have been deleted and he and Mac OS x Server accounts have been set up on your Mac, use the article in the link below to first export the contacts from your Mac OS x Server account (again, several contacts can be selected here). Once exported, remove the account from Mac OS x Server for your Mac, and then import them into your iCloud account.

  Contacts: Export and import your contacts
  https://support.Apple.com/kb/ph11586

  OS X Yosemite: add your Twitter, Facebook and other Internet accounts
  https://support.Apple.com/kb/PH18993

  Contacts (Yosemite): Accounts Preferences
  https://support.Apple.com/kb/PH19687

  Kind regards!

• Mobile device does not synchronize with Windows Media player

  My mobile device (Pharos Traveler 137) running windows media 10 mobile player is not detected by Windows Media Player 11 running in Vista.  Connected and synchronized correctly for months, it is not so now, even if the mobile device is detected by the computer and synchronizes correctly for other purposes such as outlook, files, etc..   How to get Windows Media Player to detect once more unit (specifically the card 8 GB storage) in the window of synchronization?

  Hello
   
  1. don't you make changes before the show?
  2. is the device detected on the computer?
   
  Step 1: We recommend that you check if the sync settings are correct. To do this, follow these steps.
  1 open Windows Media Player.
  2. click on the arrow below the Sync tab, point to the device, and then click Advanced Options.
  3. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.
  4 restart the media player.
  The next time that you want sync, connect the device to your computer and click on the Synchronize tab, then click Start Sync.
   
  Step 2: Add a device to sync in Windows Media Player.
  1. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.
  2. read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.
  3. selection of automatic synchronization means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".
  4. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.
  5. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.
   
  For more information on "Windows Media Player sync: frequently asked questions" visit this link: http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Run the same synchronization project at a stage of DPRProjection using different workflows

  Hi all

  In the synchronization Editor, I have a project with 2 workflow.

  I run the synchronization in a stage of the process, and then I change with a step of sql query the workflow attached to it to run the synchronization even with a different workflow.

  request to change the workflow:

  Value = "update DPRProjectionStartInfo set UID_DPRProjectionConfig = (select UID_DPRProjectionConfig from the DPRProjectionConfig where DisplayName = 'Workflow 2') where DisplayName ="SynchProject"

  but when I run the second sync I get this error:

  Error messages [2134003] = error executing a screening complete!
  [1777018] error running workflow (ITS Application Portfolio import) of the project of synchronization (synchronization Costa).
  Invalid revision store [1777263]. The store belongs to a different configuration of the synchronization and can not be used!

  I missed something. Should I update another table with the workflow to use?

  Is not possible to programmatically determine what workflow performed in a stage of the process?

  Forget the attempt to update the startup configuration when you deal with enforcement.

  Create a second configuration of starting with your second workflow instead which is not an affected grid.

  In your process chain, have two step run the FullProjection. One runs the startup configuration 1, the other a startup configuration 2.

• I keep getting error messages when you try to synchronize the files from the pc to a device

  He starts the synchronization process and finished very quickly not to synchronize files and said 'error' next to each file in the synchronization status, but no other explanation

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 are. what device you referring?

  2. What is the brand and model of the unit?

  3. What is the exact error message do you get?

  4. have there been recent changes to the computer before the show?

  5. do the issue confined to a particular file?

  6. what application you use to synchronize the device?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Set-up-a-device-to-sync-in-Windows-Media-Player

  Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-US/windows7/Sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• Updated the Treo 650, Palm Centro, unable to synchronize all the data of the device

  Hello, I bought a new palm centro once my treo 650 took a bath.  I was able to load all my previous data on the new device with no problems, but I've been unable to hotsync since.  If I do a hard reset I can load it all on the property.  The only third party application that I use is datebook5.  I bought the program dbfixit and repaired all the blobs on my calendar entries, but I am still unable to sync anything (even memos, todos, address book, make a pocket computer > computer replacement).  I also deleted my palm desktop user name that I use a new fresh user profile and I still get the same error messages.  I also ran the palmhotsyncsetup.exe of Pimlico software.

  Here is the error message I get:

   HotSync session completed with errors on 16-09-08 11:06:36
  

  •  HotSync session began 16-09-08 11:06:36 and finished in 0.0 seconds
    
  •  Book synchronization Date cancelled
    
    • Duration: 0.0 seconds

    HotSync session completed with errors on 16/09/08 11:09:37
  

  •  HotSync session began 16-09-08 11:09:36 and completed in seconds 1.0
    
  •  Synchronization of AddressBook abandoned
    
    • Duration: 0.0 seconds

  Thank you all in advance for your help!

  Hi jacobkaucher,

  Welcome to the Palm Forums. A quick question for you. Do you use wireless sync to get your email on the phone?

  If you are, then this is your problem. If not, skip the rest of this post. Wireless Sync disables the Palm Desktop software. If you want to get your e-mail and synchronization, I advise to use VersaMail instead. If you really want to use Wireless Sync and still cradle sync, here are steps on how to re-enable the lines: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=37678. This will allow you to start the synchronization again, but beware, you might start to get copies of your data.

  Message relates to: None

• Pre EAS configuration steps

  First of all my environment:

  Windows Server 2008 running Exchange 2007 SP1

  Auto generated certificates (I didn't spit the outrageous fees public certificate yet)

  Palm Pre WebOS 1.04

  I had a devil of a time getting EAS to work, and I thought I'd share the steps we have taken to get there... Here are the General steps meant to help you where you need to go, I am not guaranteeing accurate and click screen.

  (1) make sure that you have a certificate generated by your server, yes it must have the name of your e-mail server either mail.domain.com in the certificate.

  (2) export certificate EXCHANGE, nowhere else, not IIS, not IE.  Follow this link to export the certificate of the Exchange shell and note that the user name field is not used for something in this field will not matter, but the password field must adhere to your strategy of password, so make sure that you meet the requirements of minimum password when you enter a password for your exported certificate file.  http://TechNet.Microsoft.com/en-us/library/bb310778.aspx

  (3) followed the others posts on how to save the certificate on your pre.  Bottom line, connect to your pc via usb cable, USB drive, do a right-click on the cert file and send to, Palm Pre by car.  Disconnect before.  Then follow the steps to accept the certificate.

  (4) on the Exchange Server, make sure that Microsoft Active Sync is set up and configured to use SSL (Server Configuration/Client Access, click the Active Sync).  You must enable SSL under IIS to your Web console. You're in IIS and Exchange Management Console services manager.

  (5) right click on the Active Sync service, click Properties.  Make sure that your URL is correct and that your firewall/router is configured to pass 443 traffic to the IP address of web internal URL listed here on the property page.  Mine is in this format: https://mail.domain-name.com/Microsoft-Server-ActiveSync

  6) click on the Authentication tab.  LEAVE THE BOX CHECKED for basic authentication... I had this not controlled and once we had the certificate and configured routing this was our last issue.

  7) go to your pre, make sure the cert is loaded with confidence.  Then configure your Exchange account for Regional service by following the steps.  You should be good to go!  I hope this helps.

  Matt Haywood

  Matt,

  First of all, I got it to connect today.

  Yes, I was able to export the certificate of the Exchange Server with the .cer extension and install this on the pre.  So that the research on this more, I was convinced that the name of the subject of the certificate should match the field in my mail server address, I tried to connect to.  So, I thought that the name turned to the public in the mail server entry (for example, https://mail.mydomain.org) would not work with a certificate which had a name of topic for an internal domain name (for example, mail.mydomain.local)

  Another forum discussions seem to indicate clearly that the Palm software is not read topic several other names, no more, even if turned to the public name is included in the San of the self-signed certificate.

  These discussions have also suggested that the certificate that is really necessary is that of CA.  So, I opened the MMC on our mail server. Add the Certificates snap for the computer account; drill down to the root Certification authorities to trust; Open the CertAuth certificate and exported it in the same way (extension .cer base64, no key or password); This charge on the Meadow while leaving the other installed certificate.

  He signed the and immediately started the synchronization.

  I will experiment a little more to see if only one certificate is needed, as some authors have claimed.  I also wanted to play with a third-party domain certificate that we have, I understand also pose problems for owners of pre (since it is a generic cert instead of a specific for the mail server).

  Moreover, my Pre came with version 1.0.3 of the software and I have not yet downloaded 1.0.4.

  Thanks for your great post, because it helped me to get this working.

  Rick

  Message edited by rick c 13/07/2009 22:57