Start Aurora in the desktop computers and modern views?

Similar Questions

• Windows 7 64 bit, start slowing down, the desktop icons and taskbar of loading very slowly since last week!

  so first, I'll start with my system features:

  Reference Dell Xps15z
  Intel Core i7 - 2640M to 2.8 ghz
  NVIDIA GT525M 2 GB
  8 GB RAM
  Windows 7 Home Premium Service Pack 1 64-bit
  Samsung PM830 SSD 2.5 "7 GB 218, 42 GB of free
  My laptop is now just a year and plays well outside some blue screen errors that have been fixed. The question now is time to start being significantly slower, especially the loading of the office. It takes 15 seconds to the password screen, to 45 seconds to reach the office and another 45 seconds to the taskbar, icons and things on the desktop to load. What is unusual is that during this black screen, my mouse is displayed, as well as for Advanced System Care 6 performance monitor (I doubt that this is the problem as I had installed for some time). I did the troubleshooting on mine and removed about half of my program without success. I also checked the health and performance of my SSD with SSD and SSD life and both seem to be very positive. I did not any changes to the Bios because I don't want to reinstall my OS and I'm not really sure on workarounds.
  I tried also to the difficulty of the task of explorer.exe, by checking the value of shell in the registry and it is correct, that it just load slowly at the start and each time I kill and then open it again in the Task Manager. Therefore, I think that my main problem is with explorer.exe loading slowly for some reason, I also removed some desktop icons and taskbar, although I doubt that it makes much difference.
  I've also done many scans with malware bytes pro and hitman pro, there is no virus on my computer.
  I appreciate any help, as it is very inconvenient for my more than 90 seconds start time, when he was about 20 when the laptop was new.
  Thank you very much for your help!
  P.S. I have about 60 GB of games installed on my pc via steam, if it makes a difference to delete some

  When my Windows 7 is slow to start, I do the following:

  Start, then in the search box, type of race. In run, type "msconfig"(sans guillemets), and then click OK. ""
  In the general tab, make sure that selective startup is selected.
  Under Selective startup, clear the check box load startup items.
  Then go to the Startup tab and disable everything except software antivirus and important such as the microsoft. In addition, DO NOT disable any program that you do not recognize.
  This will disable any unnecessary background programs and prevent to launch at startup.
  NOTE: you can still start programs even if they do not start at startup. For example, your favorite game is one of them, and you the disabled. Now, the game does not start at startup, but if you click on the game icon later, it will always start, except maybe a bit slower when it starts. Basically, you are delaying the start of programmes which does not need to start at startup, you move a part of the start-up BACK period. The only programs that you do not disable is programs that actually need to start (like if it starts your computer will blow or something similar).

• While trying to look for something on my computer, it gives a blank screen and then start back on the desktop

  I use a laptop HP H250 running Windows 8.0. Since yesterday whenever I search something on the machine it gives a blank screen and then start back on the desktop. An analysis of the system and the registry has verified. Can anyone help?

  Hi Courtney,

  This issue may have caused due to some missing or corrupted files in the computer. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. are you referring to the Virus scan by "system scan"?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you find and fix common system issues on your computer.

  Follow the steps to run the Troubleshooter:

  (a) press Windows + Q together get the search option.
  (b) the type of Troubleshooting on the search option, and then select Troubleshooting.
  (c) click show all on the left side panel.
  (d) click on The Maintenance of the system and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This process will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

  I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

  I can bring up the Task Manager and manually run programs, etc.

  Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

  I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

  I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

  Hello

  This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

• VMWare Workstation and HP desktop computers and laptops

  I hope that there is a list of HP desktop computers and laptops where I can use VMWARE (Workstation).  In particular, I have a Pavilion Elite e9180t and would like to install VMWARE and run 64-bit windows vista or windows 7 and a Linux distribution.  Shop HP and HP Support people were no help in answering this question. In fact, people said THAT NO support is impossible.  Since HP has a relationship with VMWARE, I can't believe that the answer is absolutely no, can't do it.

  I am too much in the market for a new laptop and would like to know can I use VMWARE on a HP laptop too.

  Everyone else is off this way?

  Thank you

  I'll answer my own question!  I installed VMWare Workstation on my e9180t.  I'm on Ubuntu and Centos inside the virtual machine.  In order to run the 64-bit linux distos, I had to enable VT support in the BIOS.

• Windows 7 does not start directly on the desktop

  Hi guys,.

  Need your help on this one... .my computer runs windows 7 Home premium 64-bit, I just installed VMware workstation 7.1. Problem is this

  Before installation of VMware, when I turn on my computer, it starts directly on the desktop but now it starts until the windows login screen where I choose me as the user (Administrator) after having chosen only then it opens a session on the desktop. Please, keep in mind, there is only 1 user account created for this computer and it's me... what could be the problem? I don't want that... I want windows to load directly on my desk after turning on my computer.

  I didn't mingle with the settings under VMware before asking you guys... as I am a first time user of VMware.

  Would appreciate any help a little. Thank you

  Workstation creates a user account for its own use. Even if this account is hidden (that is why you don't see on the login screen), it always results in that there is more than one account is activated, which in turn disables the automatic connect feature. You can reactivate autologinby following the instructions here:

  http://support.Microsoft.com/kb/315231

• the desktop icons and labels are not transparent

  the desktop icons and labels are not transparent

  Hello

  · Were there any changes made on the computer before the show?

  You can check out the post below which deals on the same concern: http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

• I installed windows 7 and the desktop icons and bar tasks are enormous

  Original title: Windows 7

  I installed windows 7 and the desktop icons and bar tasks are enormous, go to Web pages, I have to use the scrollbar at the bottom of page to see the other half of the page - he said could also be a driver problem, but don't know what I'm looking for - someone can help?

  Hello

  Yes, well part of the problem from the point of view of Dell is the only "acceptable" operating system for the Office of series 4600 XP. So they have no drivers 'official' for any function of Windows 7!

  But first I need more information on the video card. Try this (on the Dell site): 4600 system is supplied either with the built-in car video or a dedicated real card video.  You should know that you got.  Right-click of your mouse on the desktop, click on Properties in the next area, you see.  This will bring you into the display properties.  Now click on settings at the top right of this next area, click Next on the advance .  Now, click on the adapter on the top.  Just below the upper on this last box, you will see your listed video adapter.

  You will need this information, regardless of where you get help. My best recommendation is that you go to the community of Dell and after a question here. Someone may have already found one, but there is nothing official since the operating system is not officially supported.

  I'm sorry, there is nothing more I can do.

  Kind regards

  BearPup

• Can I paste the same Code of Google Analytics on the desktop, Tablet and phone pages on my site, or create a new property for each?

  Can I paste the same Code of Google Analytics on the desktop, Tablet and phone pages on my site, or create a new property for each?

  I generated the code and created the property in GA I placed the code in the HTML < head > page properties metadata of my MUSE desktop file.  I am past the same code in the same place for the page of the Tablet and phone or do we get new code?

  I'm assuming that the code is the same for all pages of the Web site as long as they are within the same domain?

  I'm trying to confirm.

  Thank you!

  Yes, you will need this same code applied to all pages you want to track. Simplest is to add to your Master Pages rather than individual pages.

• I downloaded CreativeCloudSet - Up.exe. When I double click on this file. Adobe Creative Cloud installs the desktop icon and the program tries to open but don't ever completely. The turning turn (for hours), but the program never opens?

  I downloaded CreativeCloudSet - Up.exe. When I double click on this file. Adobe Creative Cloud installs the desktop icon and the program tries to open but don't ever completely. The turning turn (for hours), but the program never opens?

  Hi J.derrick,

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  Kind regards

  Sheena

• Double click on the photo (my photo) causes PC freeze with message "not responding" (scheduled for the windows fax and picture viewer)

  WINDOWS XP

  "This program is not responding...". »

  I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.

  My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.

  Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up.  Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.

  I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer?  And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?

  I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.

  Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:

  Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.

  I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).

  Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).

• How to open .tif files using the Windows fax and picture viewer

  I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.

  Windows XP SP3 with all updates and IE8.
  Thanks in advance,
  Eric
   
  Original title: how IE8 to open a .tif file by using the Windows fax and picture viewer?

  Hello

  I suggest that allows you to remove any CLSIDS listed under location:

  HKEY_CLASSES_ROOT Type\image/tiff
  
   

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.

• The desktop icons and taskbar are at least three minutes to load when I start the computer.

  Original title: problem with the desktop icons

  All of a sudden when I start my computer, the icons on the desktop and icons at the bottom of the clock of the take at least three minutes to load, and before that time, they used to load in a few seconds.  Also, I have no problem with the computer start.  Any help to solve this problem will be greatly appreciated.

  According to the specifications of your system, hard drives on your system are disks IDE (not the SATA drives).

  Sometimes the Interface IDE mode can change from DMA mode to PIO mode and when that happens, things sudden. run very slowly, but it is easy to check and adjust if you need to.

  Here's how:

  If you are using IDE drives, use Device Manager to check the channel Transfer Mode IDE is set to something like DMA if available (depends on your hardware) and the slow PIO mode.
    
  Don't forget: PIO is the slowest, DMA is faster.

  It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

  To launch the Device Manager console, click Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

  Faster selection will always be a kind of selection DMA (usually: DMA DMA5, UDMA, etc.).  If it is PIO, change it to DMA.
    
  If you are unsure of what you see after return of help and advice.
    
  If you make settings, restart and check the settings again to make sure that any change stick.
    
  What may have caused the change?
    
  http://support.Microsoft.com/kb/817472

• Computer starts normally but the desktop icons/Dowes/all are unclickable and cannot do something with them?

  My brother has recently installed FireFox on its Windows XP (the only recent change on this laptop). Last night my mother crashed the computer (the only thing she did apparently was click on volume control panel too often making it appear several times, and then go away, she then tried to open the shortcut on the desktop "internet explore", who then tried to load FireFox instead, as it has become the default value). From there on, the computer did not respond, and I could not close normally, so I had put out of service. Today, we have tried several times to use this laptop, but although it loads normally and the Mouse/touchpad moves correctly, we cannot click on any icons or the dowes or whatever it is is completely insensitive.

  Could someone tell me what to do?

  Ok

  Yes, it's more than enough RAM.

  Boot mode safe again and check all entries in msconfig to see from evry time you start.

  Start/run and type

  Msconfig

  Ok

  Startup tab

  Keep the page open, then click on the link below with your other machine. It will tell you what are all the entries and see if you can disable them or not. It will also identify malicious programs.  Turn off everything that is not necessary to run at startup

  http://www.SysInfo.org/StartupList.php

  Read the key at the top of page. Use the search box to check all your entries

  When you restart, you will get a message saying that you have begun in "Selective startup" click "don't show this message again" and then click OK

  Also check if there is a yellow speckles in Device Manager

  Right click on my computer/properties/hardware/Manager

  .