Start button / stop flashes

Similar Questions

• My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi

  My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi. u ' is the problem with that? Help, please. Thank you...

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below

  • Unplug the PC laptop AC adapter
  • Remove the battery from the laptop compartment
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

• spectrex360: Start button / stop / flashing laptop won't turn on

  I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power cord is connedted to the laptop. But the power button continues to blink and I can't turn on the computer. I tried to tap on the screen and the Microsoft keyboard key. Any way to reset this? Thank you

  OK, I found the answer. It was a hard reset. Just hold the Start button for 20 seconds (or until it no longer flashes) then wait a bit and you can restart the laptop.

• HP Deskjet 2514: Start button / stop flashes when I try to scan HP Deskjet 2514

  I had a problem where my printer would not prevent printing, even though I cancelled it.  I watched and followed these instructions.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  I didn't know that one to remove, so I deleted everything in the folder.  Now, my printer prints, but whenever I try to scan something, my power button flashes and it won't scan.   Help, please!

  Hi @Donna924,

  I read your post and see you were able to solve the problem for print jobs would not cancel, but now you are unable to scan. I'd love to help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically. This software will also troubleshoot jobs stuck in the queue, which you could use in the future if the problem persists.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Start button / stop / flashing loud fan noise

  I GT5622 desktop and for awhile I was getting a lot of blue screen of the error codes and the computer would shut down or freeze and I have to press the power button to go back... Told me to clean the inside out with can air that I did, now it comes on sometimes and sometimes it won't I'll have to keep start to come, it will just make a sound for me noise from the fan and the power button LCD light will not be on now, LCD power light flashes and the rather I'm on the internet or not whenever I move the mouse the power button blinks and I can hear the fan start strong I need my computer for school, please help with this problem... Thank you

  See the documentation provided with your computer or the web site of manufacturer support.  The flashing light is almost surely you give an error message and if you can interpret what it is telling you by looking at the model/types of flashes on the support web site, you can then replace or repair what is defective.

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• T450S does not start, button / stop flashes 3 times

  I have a T450S which is a few months. It worked fine until the other day when it wouldn't turn on.

  When I push the power button, the Green LED flashes three times. Then, the LEDs on the keys F1, F4 and Fn comes on for a few seconds and turns off.

  Here is what I tried:

  -Load for a long period.

  -Remove the battery for an extended period.

  -Remove the battery and now the power button for 60 seconds.

  -By pressing the button in the hole reset of emergency.

  Nothing has made any difference. Any ideas?

  Update: I called Lenovo support and send it for repair.

• Start button / stop flashing light turns off

  Original title: Power up

  When I turn on my Dell Demension E510, the power button flashes amber in color. I can't turn on my desk until there is a clicking sound or reset and the flashing light goes off.

  Hi HOWARD R Ruscin,.

  This seems to be a hardware related issue. Your best bet of contact would be the manufacturer to resolve the problem.

  Visit the following link to contact:

  http://en.community.Dell.com/

• Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

  Original title: Start button / stop - "ask me what to do" - where is it?

  Under XP, when I pressed the power button I could put it "Ask Me what to do." This is very useful for two reasons:

  -My PC is under my desk, and if I'm not careful, I can press the power button with my knee...

  -To turn off, I can hit the power button / stop rather than start etc, then choosing.

  The feature exists on Windows 7 (press alt + F4), then how do you link that to the press the power button? Why this was removed?

  See you soon,.

  Chris

  Hello

  Yes, there are only work-a-rounds and that is why I suggested that
  thread. There are also a few details about why he was abducted that
  are especially that in general as it caused more problems than it solved. Then
  for those who have used the function correctly, it is a concern when trying
  to restore its functionality. To my knowledge, is not 100%
  this case, just ability cannot be added in by a registry setting
  as support has been totally removed. If this is the case, then the work - a-
  towers or possible 3rd party solutions are the remaining options.

  Please let us know if you find a better solution.

  I hope this helps.

• T400: Start button / stop does nothing in Vista

  Hello, I start button / stop set to "turn off computer" in the Power Manager settings, but when I press the Vista power button nothing happens. I use Vista 32 bit SP2. The power button turns the computer very well and of course now that it performs a closed hard but he executes any action when you press right on it.

  Holding for 1.5 seconds will shut down normally (assuming that you have defined at the stop) and now it for about 5 seconds or more will make a stop 'hard' who just turns off everything without a load.

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.

• Officejet 5610 starts slow printing and button / stop flashes

  This just started happening.  A document (no matter what I print) will begin to print, get the first two lines printed and then take incredibly slow.  Meanwhile, the power LED flashes and the message says "print...". "If I restart my computer and as you turn the printer power on and off, it will correct itself.  Anyone else have this or know what to do?  Thank you

  Looks like the printer can be connected to a surge protector and the surge protector can not provide the stream of electricity the printer needs since it starts then slows down and the power LED flashes.

  The printer is connected to a surge protector?  If so, plug it directly into a wall socket.  If it's related to the surge, the question shouldn't be present.

  Let me know what happens.

• The Start button / stop continues to Flash / pulse?

  HP Deskjet 4160.

  I just upgraded to Explorer 9

  Hi gpmroy,

  A power indicator light is flashing on the printer indicates generally prepare a print job. The power light flashes while the product receives the data.

  Have you tried to print from another browser like Chrome or Firefox? If you are able to print from another browser, I recommend downgrading to Internet Explorer 9 to 8 (or just continue to use another browser).

  I would like to know if this helps or not.

• Flashing Orange light where the Start button / stop is?

  I have an OptiPlex 3020, which was connected to an APC backup battery. The PC was on backup battery failed and off the computer. When I went to turn the computer back on it had a flashing yellow light?

  What does that mean?

  Nevermind, the problem was with my APC has no battery. When I plugged the PC on an another APC, it works fine.

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.