The Start button / stop continues to Flash / pulse?

Similar Questions

• My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi

  My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi. u ' is the problem with that? Help, please. Thank you...

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below

  • Unplug the PC laptop AC adapter
  • Remove the battery from the laptop compartment
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

• Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

  Original title: Start button / stop - "ask me what to do" - where is it?

  Under XP, when I pressed the power button I could put it "Ask Me what to do." This is very useful for two reasons:

  -My PC is under my desk, and if I'm not careful, I can press the power button with my knee...

  -To turn off, I can hit the power button / stop rather than start etc, then choosing.

  The feature exists on Windows 7 (press alt + F4), then how do you link that to the press the power button? Why this was removed?

  See you soon,.

  Chris

  Hello

  Yes, there are only work-a-rounds and that is why I suggested that
  thread. There are also a few details about why he was abducted that
  are especially that in general as it caused more problems than it solved. Then
  for those who have used the function correctly, it is a concern when trying
  to restore its functionality. To my knowledge, is not 100%
  this case, just ability cannot be added in by a registry setting
  as support has been totally removed. If this is the case, then the work - a-
  towers or possible 3rd party solutions are the remaining options.

  Please let us know if you find a better solution.

  I hope this helps.

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• HP Deskjet 3650 - button / stop continues to Flash

  I above titled printer.  Until 4 days ago, it printed and worked.  Don't ask me what I did, but I have loaded and reloaded this printer.  I'm in the wrong there.  I did everything and nothing works.  The button keeps blinking and I can't it resets automatically.   I even tried to load the original CD.  I have Windows 7.  When I reload, he says of it's ready, but he's not.  He told me that it is off line, etc, etc, etc.  I am at my wits end with this thing and I'm ready to throw it out the window.  PLEASE... I hope there is someone out there with a simple explanation on how to fix this thing!  Thank you.

  Hi DIANEW_788,

  Follow the steps in these articles of Association to resolve the problem:

  The HP product stops printing and the Power flashes or "Mechanism error" appears on the computer (paper jam)

  Power light flashes

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• Flashing Orange light where the Start button / stop is?

  I have an OptiPlex 3020, which was connected to an APC backup battery. The PC was on backup battery failed and off the computer. When I went to turn the computer back on it had a flashing yellow light?

  What does that mean?

  Nevermind, the problem was with my APC has no battery. When I plugged the PC on an another APC, it works fine.

• HP Pavilion X 2 11-h003sa keyboard and the start button

  I have a Pavilion X 2 11 - h003sa running Wwindows 8.1. It's less than a week and without any changes to the system (no software update or driver installs) after a restart, the Start button stopped working and when I try to dock with the keyboard, the start on the tablet button remains lit (but unfounded) and the keyboard does not work. By that, I mean the key and the trackpad do not react, are not all usb devices, and even the charger shows not only plugged into Windows. The orange charging light lights well.

  Weirdest part is the only thing that works - he always knows when the laptop is closed with the connected keyboard.

  Any suggestion or help here would be appreciated.

  Thank you

  James

  Hello, James.

  Your X 2 is perhaps responsible got stuck on something, he is unable to perform; This problem can be self-correcting after a full stop and normal reboot of your tablet. Since it is not always easy to determine the power state of a Tablet, I suggest you make sure that is turned off by pressing the power button for 10 seconds, then release. wait another 10 seconds then press the Windows Start button. You should not feel any momentary vibration when you press the Windows key. When you are certain that the X 2 is turned off, try to start normally. I hope that your tablet will resume its normal operation, but if not, I suggest you contact your region (UK?) HP support because several interactive steps may be needed to determine the cause & fix for your problem; which can lead to a very lengthy process if attempted by the rear "n" following exchanges of the forum.

  Find your HP contact information & support options by scrolling to the bottom of this page, to this you see "On HP" on the left. Click on "Contact us" just below this to see the choices to your selected region or country...

   

  I hope you come back soon with news that your tablet is running normally. However, we will also try to answer questions if necessary.

   

  Good luck!

• BlackBerry Passport frozen in the start-up / stop Mode

  My passport is stuck between to turn on and off.  I don't know how it started, but now the Start button / stop for long periods does not work.  I tried a factory reset, but of course, he didn't stay long enough to be recognized.  The link downloaded a new version of software for device, but for example, there is no charge.  Any help would be appreciated.

  Looks like I dodged a bullet!

  I left the device plugged into the wall charger and walked away.  I checked on it in 4 hours and the phone was on and had a load of 48 percent!  I have no idea what happened to cause a discgarge rappidly, but all is well that ends well

• spectrex360: Start button / stop / flashing laptop won't turn on

  I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power cord is connedted to the laptop. But the power button continues to blink and I can't turn on the computer. I tried to tap on the screen and the Microsoft keyboard key. Any way to reset this? Thank you

  OK, I found the answer. It was a hard reset. Just hold the Start button for 20 seconds (or until it no longer flashes) then wait a bit and you can restart the laptop.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

  Looking for assistance

  Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

  I read a lot of messages and other information about a similar problem.   Therefore, I did following:

  1. unplug everything, press the power button / stop for 1 minute and retries.   without success

  2. replace the CMOS battery.  without success

  3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

  4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

  5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

  6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

  Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

  Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

  ATX power supplies should work. Here are the standard components of the Dell desktop computers.

• close the option to stop/restart/switch users is missing from the Start button

  For some reason, I have more option to stop/restart/switch user under the Start button. The lock button is there with an arrow, but the only option under this arrow is LOCK. How do I return these options? The only way I have to shut down the computer now is to use the button on the computer itself.

  Simple terms only, please. I am a newbie of Windows. Thank you.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner