Start computer chkdisk error sector corrupted volume

Similar Questions

• HP p6740f - error Code - BIOHD4 Boot sector corrupted/Not found

  I have a HP p6740f running on windows 7 home premium 64-bit and I cannot start my PC. When I try to start my PC it tells me "Reboot and select proper boot device or Insert Boot media in selected boot device and press a key" but they do nothing. I checked the cables connected to the hard drive and the cable is connected and the motherboard are both closely connected. I put all my BIOS to default. I ran a diagnostic test and only failed when starting the test and received the code error BIOHD4 and said "WARNING: Boot sector corrupted/Not Found" and suggests that I have done a system restore and contact HP support. I have no CD recovery and when I try to run a recovery system on the start screen, nothing happens and sent it to me to reset and select proper boot device screen. Recently, I cleaned my CPU heatsink and the inside of my computer, but I don't think none of this have caused the problem.

  Try to contact the HP Customer Service asking for the 11NA1MRW603 HP Windows 7 64 b + Supp 3 Recovery Kit to your computer. Meanwhile, download Windows 7 Home Premium 64-bit Digital River, a Microsoft hosting partner. Once downloaded, burn the ISO on a DVD to create a Windows 7 bootable disc. Now try to boot the disk and repair the boot sector of your hard drive.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• my computer keep saying this hard drive as a corrupted volume

  my computer an acer aspire m1610 starting acting weird a couple of days ago the go do the check disk and then whenever I start he had to repair windows and he said he can't fix it automatically when I press the detail, they say that the hard drive has corrupted volume, but I can't accomplish anything don't not even system restore and I back to top last month, and he says it's not got Windows vista I have it says unknown.

  I NEED SOME HELP WITH this don't KNOW WAT to DO I think THAT the WHOLE SYSTEM CRASH BUT I don't SAY no

  Hello

  Looks like technical help from a real store of the computer or the manufacturer of your system's support. Probably need a
  new hard drive. Off the coast of the old data may be recoverable depending on how damaged it is.

  Sorry, no better news.
  Rob - bicycle - Mark Twain said it is good.

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code - 0x8001066ba

  Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code and I can not start it manually by the same error code. How can I solve this problem?

  Hello

  What is display / causing the error message? Some security/antivirus/antispyware products can cause this
  error. On those which do you use, including everything that you have ever even those uninstalled (remainders
  may cause problems). AVG and others have been known to disable Windows Defender.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears.

  QtCore4.dlll error message

  Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears. Where can I find it and how do I reinstall it?

  Hello

  ·         Have you try installation or uninstalling any program like the SIMS 3 on your system?

   

  Method 1:

  The problem could be caused by some startup item or services that is loaded at startup.

  I suggest you perform the clean boot on your system and check if it helps to resolve the issue.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2:

  Most of the customers were facing this error by installing or playing SIMS 3 game, if you also face this problem while playing or to install this game, then you can check the link below and follow the steps provided by Shekhar S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/qtcore4dll-missing-error-while-playing-Sims-3/02735e2a-2ff6-4D29-8C8C-0852605734e2

   

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)