start in the middle of the process instance

Similar Questions

• Can someone help me understand the process Instance recovery

  First thanks for all of you who responded to my post, any help is really appreciated.
  
  I would like to more deeply understand the Instance recovery process then the Administration Guide of Oracle Docs can tell me.
  
  What I have so far of Instance recovery is:
  
  1 oracle determines which files are not synchronized.
  2. all data from redo log files is applied to restore log buffers by progression. Buffers do not participate on the database of normal transactions because they are marked to pick it up.
  All these data are applied to the data files (commited and contains transactions).
  This step is called roll forward.
  3 cancellation are used to restore transaction no. After this step the datafiles not aura no data contains on them. At this point, the instance is available for users, but the blocks used are not.
  4. all files are now in sync.
  
  My questions are:
  
  -Step 1, what process determines which files are not sync? Make the bed of Smon the controlfile and data file headers and then make a list which is not sync?
  
  -L' step 2, what is the process that reads the information in the redo log files and complete the recovery log buffer? What is the CKPT? And how he is warned that he might start to read the files after completing step 1? There is a semaphore that is defined for it?
  
  -Step 2, which process applies information engaged and contains buffer redo log for the data files? When it starts to apply this information of the instance is already partially available to users?
  
  -Step 3, what is the process that reads up to cancel to restore transactions not? This process must be done once step 2 is complete as could be blocks of the undo tablespace on buffers of the right-wing newspaper do it again? And when this step 3 starts, the process is triggered by an another semaphore?
  
  -When step 3 is finished, what process changes the State of the database of partially open to open, or that's just what we call it when the database has always revenge marked for recovery?
  
  Thanks again in advance for the help, there are reasons not practice known this information, I'm just a curious person who could not find this information on the google...
  
  
  Ricardo Rodriguez

  Ricardo,
  Well, I'll take a chance to respond.
  (1) SMON in the start-up phase, in the strict sense in the editing phase, compares the SNA stored in the control file with the data file headers. This sCN is called checkpoint SCN. It is always higher among the controlfile so its part of the same database and is not set up to an old backup. By this correspondence, Oralce comes to know that there are some report files with their SNA control point is only not with the controlfile and consequently, instance recovery is reported. Here is the list of files is prepared.
  (2) the same process SMON only would trigger playback of the redo log files and launch the Rollforward process. Roll forward is made from the last address bytes redo controlled at the end of the restore log forward. This means that the last block, blocks have not reported in the data file are simply read and are dumped on the data files. As a result, we get a situation that the data file will end up with a lot of data committed but also committed that redo is containing both.
  CKPT process will not come in the picture I think. Where did you read what CKPT would do all this?
  (3) SMON governs all this thing is to say the application of the data for the data files. No, in this phase, we are still in the phase of mounting that this recovery is called crash recovery. Oracle wouldn't let users to use the database at this point. Data is still not available for them.
  (4) do not bring semaphores here. They are already in use when you allocated the memory of your instnace. Its work process level. After the mount phase is completed, oracle would open up the db. At this stage, "the transaction recovery" aka rear roller phase. That would be launched to relax all the operations that are not validated.
  Now to do this, undo will be used. Oracle launches this phase into two or more strictly speaking 3 ways. One, SMON would just check how many blocks will be there for the recovery. If they are larger, it would begin the rear roller with parallel slaves. This is called "we demand" rollback. It is initiated by the user. So if you were using the EMP table data and the server crashed between, now the next time you start, if you try to access the same blocks once again, they are set aside on the basis of priority.
  The third one will rollback transaction intra. It's basically splitting the work among the slaves so that if a slave is sitting free, it can share the work and can move forward to make things more quickly restored.
  Please note that all this is happening at the open stage. This means then that this is the case, oracle is available for users. And second, there is little change in this process (an integer) 9i go. This is called two-pass recovery which has been made to make this process a little faster. In this regard, SMON ignores these blocks that are controlled by DBWR during execution of the phase of rollforward.
  Hope this makes some sense and helps. Let me know if there is something wrong or unclear.
  HTH
  Aman...

• OIM11gR2: GetAccountType using the key of the Process Instance

  Hello Experts,

  I want ot update accounts primary AD with data using form API update process.

  So I need to check if the account type is primary or secondary. I want to check it out with 11 g of the API.

  Please suggest me any example of code/etc so that I can deal with.

  Thanks in advance!

  IDM

  Simply add a code example,

  oracle.iam.provisioning.api.ProvisioningService ch = Platform.getService (ProvisioningService.class);

  The userAccount = ps.getAccountsProvisionedToUser (take) list;

  If (userAccount! = null) {}

  for (account userAcc: userAccount) {}

  You can check out the details below

  userAccountId = userAcc.getAccountID ();

  AccountStatus = userAcc.getAccountStatus ());

  AppInstance = userAcc.getAppInstance ());

  policyKey = userAcc.getPolicyKey ());

  }

  }

• Windows starts with the failed disk verification process

  When you start Windows, the process is interrupted with the following message:
  Checking file system on C:
  The type of the file system is NTFS

  One of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended to htat you continue.
  The disk check was cancelled.

  He continued to cancel itself and Windows continues to leave now. It is a HP Pavilion dm4 with Windows® 7 Home Premium 64-bit. How to solve this?  Please help me!

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: If you are able to boot into normal mode successfully then, try to download the Fixit of the article below and install it.
  http://support.Microsoft.com/kb/975778

  Step 2: If you are unable to boot into normal mode, try to start in safe mode, and then perform the check of the drive in safe mode.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode 
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Step 3: The repair of the boot on the computer.

  Reference: http://windows.microsoft.com/en-us/windows7/products/features/startup-repair

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Getting the activity process instance information

  We need following:
  
  The process instance will be created manually or integration of another system. It is not possible to have two instances running in the same process, so we want to check if there is already an instance running for a given process. The company information that uniquely identifies the process are attributes of the process data object.
  
  We know how:
  (1) check if it is already existing instance of the process that gives the information of the company that identifies it
  (2) check that the existing instance is running or completed completed
  
  We want to know if there is no existing API, we can use to achieve the needs above, what are their and where you can find more information of their use.
  
  We tried to look in the documentation of the API which methods might be useful, but we were not able to identify the existing documentation, any one who was able to attend to our needs.
  We have also not found any topic in this forum on this topic.
  
  If possible, please give us some examples of use.
  
  Version: Oracle BPM 11g

  Hello

  In SOA Suite 11 g, you can use the Java API with Composite sensor to achieve this behavior:

  1. first create a composite sensor in the operation to create the composite process instance, during initialization of the sensor with the company information that uniquely identifies the process. This composite sensor can be used to locate the composite instance EM or through the API. See http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_compsensors.htm#insertedID0 for more information about the creation of Composite sensor

  2. with the help of the Java APIs (http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e10659/toc.htm), find the composite instance by the Composite sensor, as explained: http://blogs.oracle.com/soabpm/2009/08/soa_suite_11g_-apipart_3_-_f.html. With a reference to the composite instance, you can check its States of internal components.

  The following libraries must be imported in your java project:
  - /oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar
  - /oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar
  - /wlserver_10.3/server/lib/weblogic.jar
  - /oss_11gr1/soa/modules/oracle.soa.fabric_11.1.1/oracle-soa-client-api.jar
  - /oracle_common/webservices/wsclient_extended.jar

  I hope this can help.

  Kind regards
  Rafael

• How to find the bpel instance in 11 g based on the index values

  We have 10 GB BPEL processes where we define the 4 index values for all instances. Whenever the support request comes, ask us the values of index and based on what we're looking for the process instance.
  
  We have now migrated bpel 10g and 11g process. How to find the bpel instance in 11 g based on the index values?

  You can go there. http://soasphere.blogspot.com/2011/04/how-to-Serch-composites-for-index.html. Do a join on the cube_instance and ci_indexes tables.

• Can not find the file init for the database instance

  I have installed Oracle 10 g under Linux CentOS, run netca to create listener.ora and tnsnames.ora files, then I run dbca to create the myodb database and orcl instance.
  
  
  
  Now when I run dbstart, in the boot log, that it is said that he could not find the file orcl example init. so that the database myodb, he says:
  
  < em > / oracle/product/10.2.0/db_1/bin/dbstart: database instance "myodb' hot began.
  
  
  
  
  
  < /em > my questions:
  
  
  
  1. why it is said when I run dbstart both myodb & orcl are instances of database, I created myodb as the General database, while orcl corresponds to the instance, here it says:
  
  instance of < em > data treatment "orcl": journal file /oracle/product/10.2.0/db_1/startup.log
  
  Database instance "myodb' of treatment: save the /oracle/product/10.2.0/db_1/startup.log file
  
  
  
  < /em > is the name of the General database is considered an instance itself and can be used alternatively with the instance of word?
  
  
  
  2 when I created the database using dbca, I made the password for users of SYSTEM & SYS.
  
  
  
  When I try to connect to sqlplus using the system/mypassword, here it says:
  
  
  
  < strong > < em > ORA-01034: ORACLE is not available
  
  ORA-27101: shared memory realm does not exist
  
  Linux error: 2: no such file or directory < /em > < / strong >
  
  
  
  3. the database myodb started but it is not mentioned in my tnsnames file or the listener, while one mentioned is orcl has not begun, how is it? I know I'm missing a dir for /orcl in/oracle/home/admin, something that we find for the myodb, where there is/oracle/home/admin/myodb/pfile/init file.
  
  
  
  How can I fix this?
  
  
  
  4. What is the use of the command sql, < strong > edit < facilities > system registry, told me in another thread to connect to an idle instance with sqlplus and run this command, here what I got:
  
  
  
  < em > ERROR on line 1:
  
  ORA-01034: ORACLE not available
  
  
  
  < /em > 5 - can I just rely on the name of the General database and forget the thing of the Forum? I'm just confused about the difference and do not know how the orcl instance was created, it has not been created with dbca, because when I run dbca he says it's already there, create another instance, so I commented the sid parameter and now I amn't during its creation and how to retrieve its files if I need to re - create it again.
  
  
  
  Note: it is located in the bash_profile as $ORACLE_SID = orcl, why it's the only game, while General MYODB database name is not set, can be there rather than on the instance or SID in the bash_profile?
  
  
  
  
  
  Sorry for the many questions, this is the thing of the instance and their related discipline, I appreciate your help.
  
  
  
  Thanks in advance.
  
  
  
  
  

  If you have only 1 instance "orcl" then the oratab file should have only 1 entry - only for "orcl". Along, only one instance "myodb" {with the db_name "myodb"} must be started.
  The database Instance is identified by the SID - IE the ORACLE_SID.

  Normally, the SID and DB_NAME are the same - and they do like default value is the same when you run dbca. You have changed probably manually the db_name in dbca.

  If the listener is running on port 1521 and is started before the database instance, the database instance automatically saves with the listener. If the listener is started after the database instance, and then the command 'ALTER SYSTEM REGISTER' in the database instance indicates PMON to register with the listener.
  If you do not want to depend on the automatic check of the database with the listener instance, then you can include the information database (SID!) in the listener.ora. In addition, which would be caused if the listener is not on the default port 1521.

  See my posting in this thread: oracle sid and database the name of for more notes.

  A database can contain multiple schemas - each schema is a different database account. In other implementations of database (non-Oracle), what is called a "database", it is called a 'plan' in Oracle - but that is created as a database account. Database accounts are listed in DBA_USERS - if a user "owns" objects, it's a 'plan', otherwise, it is only a user. {Oracle also provides a CREATE SCHEMA command to create multiple objects in a single command.}

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant K grapple on November 6, 2008 09:31
  corrected "orcl" to "myodb.

• process of the App "on the new instance" exact point of execution

  Hello, I have an application process that aims to define a bunch of elements of the application at the start of the session.

  II developing used authentication 'door open' and everything worked as expected.

  As I went to LDAP, it seems that the process is called even from the login page (101),

  even if it is meaningless at this stage since no user identity is established.

  Open door seems to ignore the page 101 with its own simplified login (user name) dialog box.

  where my approach is not called (but it is called a little later because the parameters are resolved

  at the time when the application needs make his first login page after).

  What is the recommended method for the initialization to happen only once.

  but only after authentication successful?

  Application of processes & calculations occur before a user is authenticated.

  Try this: set up a simple application with two elements of the Application.  Set a single item on new Instance in him: APP_USER and others before heading to: APP_USER.  Then, on Page 1 of your application, print these two points.  You should see that the point on the new Instance is set to nobody (that is, the user has not yet been authenticated) and the header before one is defined for the user that you just connected to.

  It's a bit counterintuitive, as you mentioned, but this is workaround that I've used for a while and I had no problem with it.

  Thank you

  -Scott-

  http://spendolini.blogspot.com

  http://www.enkitec.com

• 11g BPM - definition of the instance of a running process instance data

  Hello
  
  What is the recommended model to interrupt the running process instance and modify an instance variable (data object)?
  
  Scenario is:
  -process instance is launched with an interactive look at the instance data
  -an event is fired, effectively the interruption of the instance and change the instance data
  -as soon as the user opens the screen for the interactive data has changed
  
  Any help much appreciated.
  
  see you soon
  
  Tony

  Hi Tony,.

  It depends on what version you have.

  If you use an earlier version or 11.1.1.5 (without the feature pack), I think that arun Pareek has an old blog on how to do it using BPEL. I can find it for you if you need.

  If you use 11.1.1.5 (with the feature pack) or more, you can use a correlation as we are used to use in 10g. Let me know if you need more information, but your process would need to have:
  1. a defined correlation that is unique
  2. a subprocess of the event which has a startup (no-the interrupting) Message event that uses the correlation (this sub-process of the event, that's what you would use from outside the process to notify the process).
  3A inside the subprocesses of the event, you would be directed to an update activity that would change the value of the variable in the main process (perhaps put to a value you pass in from outside the process via the subprocesses of the event start Message event).

  Hope it gets you going. Let me know if you need more details.

  Dan

• create the new process instance

  Hello
  
  How can we create a new instance of processes other than in global activity. Is there a way on this?

  Hi Anuraq,

  Know I'm leaving on a couple, but there are several ways you can create a new instance of the work item in a process:

  (1) this is how you create an instance in a process using the logic in the activity of the automatic method. This example uses the "Fuego.Lib.ProcessInstance.create ()" method below within a process:

  // "args" is an associative string array (Any[String])
  argsIn as Any[String]
  // this assumes that the Begin activity has two argument variables
  //   named "nameArg" and "amountArg" and you're setting them
  //   to the variables "name" and "amount" respectively
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  
  // logic here to determine the name of the process to create an instance in
  idOfProcess as String
  idOfProcess = 
  ProcessInstance.create(processId : "/" + idOfProcess, arguments : argsIn, argumentsSetName : "BeginIn") 
  

  ProcessInstance is in the catalog inside Fuego.Lib.

  The processId parameter (the variable "idOfProcess" in the logic above) is the thing that I most often live with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  // this will *NOT* work
  argsIn[someArgVarName] = "Hello"
  argsIn[someBpmObject] = myBpmObject
  . . .
  

  Here is the correct syntax:

  . . .
  // this *WILL* work
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  . . .
  

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way. In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

  (2) the overall activity of creation - creates automatically an instance based on human interaction - requires no other logic to set the argument variables you want to spent in the process mapped to instance variables. If it is decided in the screenflow associated with this activity that you do not want to create an instance after all, he just needs to hit an automated task to screenflow creations worldwide that has logic 'action = CANCEL'

  (3) Interactive global activity - also based on human interaction, it can create an instance when you get inside screenflow Interactive global activity to an automated task that has the logic of Instance.create () above.

  (4) using the Fuego.Papi.Instance.create method using the logic inside a process.

  (5) using the Java PAPI:

  fuego.papi.Arguments arguments = Arguments.create();
  arguments.putArgument("inArgument", "MyArgument");
  String consolidatedProcessId = "/SomeProcessNameId";
  String argumentSetName = "BeginIn";
  fuego.papi.InstanceInfo instance = session.createProcessInstance(consolidatedProcessId,argumentSetName,arguments);
  

  (6) with the API of PAPI-WS (Web Service), you can create an instance in a process using a web service call.

  (7) a process can create a new instance in another process by using the activity subflow, which creates an instance in a child synchronously sub-process and expects the result to return once the instance in the child sub-process reached the end of the process activity. The parent process, you would correspond to the variables of the arguments incoming and outgoing of the child called process with instance variables in your parent process.

  (8) a process can create a new instance in another process using the process creation activity that creates an instance of an asynchronous child subprocess (fire and forget), but does not expect the child to respond to the parent company. Once the child is initiated, the mother continues its flow. The parent process, you would correspond to the variables of the incoming arguments of the called child process with instance variables in your parent process.

  Dan

• Sometimes during random playback of music, next song starts from the Middle

  This has happened for about 2-3 months now. It is usually a rare event. Maybe its just me, but I feel that slowly becomes more frequent...

  In any case what happens is, while I'm listening to my iphone the shuffle, it starts the next song as usual, but sometimes this song will start from the middle. It's weird. It also happens when im jumping songs manually.

  -A.L.

  Start with the basic troubleshooting steps.

  First, try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Firefox, or the Profile Manager will start. In my task manager, the process uses 50% of my cpu but does nothing. I like browsing with firefox, how do I fix?

  I tried to restart my computer, the I tried to uninstall and reinstall uninstall, delete all files of firefox and folders, then reboot and then reinstall. Also, I tried to open the Profile Manager to edit my profile. After you have reinstalled several times and try to open the Profile Manager before launching firef0x, I got the firefox crashed window and the process in the Task Manager always uses 50% of my cpu. The most recent strike and then re - download gives me an error "the file is corrupt" and will not even install the program.

  Kill the process that you see, including any plugincontainer.exe, only once firefox has stopped running don't try to update.

  Completely unexpected instances of firefox running can sometimes be the result of malware activity.

• What is the order of the removal of the songs to an iPod Classic syncing &gt; somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• New HP HARD drive &gt; load recovery disks &gt; fails to start after the installation process on the press continue

  I have Pavilion d7-4165dx laptop. I saw US, that made a purchase of the United States (BestBuy).

  -HARD drive failed after renewal of antivirus software trial period.

  -All diagnoses would not recognize the HARD drive.

  -Support HP said still in warranty, but I am out of country.  HP said more was likely HARD drive cable.

  -Buy cables and a hand off USA door.

  -Installed, always the same answer.

  -Ordered the new HP's HARD drive.  Out of stock.  Finally inquiring was commissioned to a part 3rd US rep.  He recommended to buy directly from output, but higher speed.  Did this and then HP replacement HARD drive arrives.  Both outside the U.S. door hand.

  -Install the fastest (slightly smaller) Seagate 500G 7200.  Has started the recovery with discs of recovery (5 in total who received from BestBuy, but not the OEM to the research), but before the new HARD drive is smaller than the original WD 640 G 5400.   Put WD #1 Bay and Seagate in #2.

  -Start the process of disk recovery.  Any resumption of the process of the plant and on the last drive-through, it says do not touch while the PC starts on and outside, etc.  Said so press on continue continue.

  -When the press continue, simply goes to the black screen with "No boot device...". »

  -Run the other options, the same message.

  -Diagnosis of ran.  Drive HARD everything is OK.

  -Called HP support.  It says I have to buy the HP recovery discs.  Those I have (5) is not the right one, there should be only 3!  They are that I got from BestBuy, but look like they were made here when BestBuy configures the PC.

  Suggestions anyone?

  Someone has found the problem for me today...

  "Put WD #1 Bay and Seagate in #2.

  When the directions say eliminates any external devices... it really means remove all devices that can be removed that were added after you bought the computer... including in-house!