Start MMC and windows

Similar Questions

• I try to start Skype and "Windows stops and seek resolutions.

  Original title: Skype problems

  I try to start Skype and "Windows stops and seeking resolutions" I have reinstalled the applications updated Skype and still does it.  Windows must be the problem.

  Please see the information in the following thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Skype-was-working-and-now-it-doesn ' t/e51eb040-fd23-4f01-a5c1-aee331b8a3c8? TM = 1307302918607 & page = 1

  Thank you

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• User tab is missing from the snap-in group policy in Microsoft Management Console (MMC) and Windows XP users

  I'm trying to add the user and group policy in Windows XP in MMC. However, when I click on browse, it has no user inside tab. How an application policy for a certain group of users?

  Hi Muhammad,

  Your computer is connected to the server or domain?

  If your computer is in a domain environment, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• The slow start-up and Windows scrolls automatically

  I use windows 7. Hit me the power button twice or more to load windows after the BIOS is loaded! (

  I mean it shows "starting windows", but the four quadrants of windows appear not for a long time).

  Can someone help me?

  In addition, one more problem

  When I scroll through various icons or items in a list, often the cursor automatically goes to the top

  or the first icon is selected.

  or when I'm in the middle of a pdf file. I've suddenly will have access to the upper part of the page over and over again. its frustrating! someone help me please sort?

  Original title: startup problem

  Hey fatty,.

  Thanks for posting your question on the Forums of community of Microsoft.

  1. At he start normally before? If YES, you did important equipment or modifications to the software on the computer before this problem?
  2. The second problem is specific to a particular program?
  3. What is the serial number and model your computer?

  The question my occur for various reasons, including some drive corruption, outdated BIOS version or damaged file system. Then I suggest that you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  I suggest to run a Startup Repair to repair the damaged boot system files and try to start normally. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to the next method.

  Method 2

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean boot the system to exclude the possibility of a software conflict.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Please check the second issue in safe mode and clean boot, as mentioned above. If the problem persists, try to update the display adapter driver, as described below.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• YouTube videos are green for a few seconds when they start, quickly moving and switch between fullscreen and windowed mode

  suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.

  I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either

  I found 2 things of this kind of help.
  the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.

  the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.

  These are just little things, but I would like to return the standard player.
  If anyone knows anything that could help me with this please let me know.

  This is the screenshot:
  http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNG

  What a little wild speculation?

  YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.

  • Preload YouTube videos while disabling playback Dash - Lifehacker
  • Center of YouTube - Add - ons for Firefox

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• 1410: HDD password appears and Windows does not start

  in a 1410 out of the blue sundendly apears a message PASSWORD HARD drive and windows will not start how to solve the problem?

  Hello

  He password disk HARD is not removable without knowing the old password of HDD.
  If you n t know this password for the HARD drive is locked and it s not possible to use it.
  Unfortunately there is no other possibility

• Envy of HP dv6 7252er: laptop keyboard doesn't work anymore, any usb in the BIOS menu and start. In Windows, it works

  Recently, the keyboard no longer, no usb, in the BIOS menu bottled in the menu where you choose the Safe Mode boot. It's when you start the laptop, I press F10, it works in the BIOS, and is not a button doesn't work, the time comes, while the BIOS does not work. Also bottled menu at startup, I press F9, comes in bottles menu, but can't decide where to begin, arrows and enter does not.
  Laptop HP Envy dv6 7252er, a month or two ago, it worked.
  I must say, the night went to remove battery CMOS (Bios), bios folded, reinstalled windose. Did not help. In most windose, keyboard works.
  Any suggestions of what to do, or what could be the problem?

  PS Google translator

  The problem is resolved. Flashed the BIOS.
  Keyboard does not not in the BIOS menu and booth. Windows worked.

  After flash it worked.
  For flashed using the key USB Flash Drive and Windows + B. Image from the installer.

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• FSX with acceleration gold Edition starts now when I upgraded to Windows 7. It happens just with blue logo start FSX and crashes.

  I ran FSX with acceleration gold edition on my Dell inspion 520 with Windows Vista Edition home premium SP1 and 2 and it worked very well.  Now I updated to Windows 7 Home premium and it just hangs.  I uninstalled FSX and acceleration completely and even delete the directories and given it a clean install.  It seeks to build the database markings and landscapes, and then I let myself just with blue logo start FSX and even after a few hours, nothing happens. It would help if she had an error message, but nothing.  I have also reinstalled the driver for my NVIDIA GEforce 9400 graphics card and checked DirectX and its says its fine.  I have dual core 1.66 32-bit with 4 GB of ram.  Someone has any idea how to solve what Miss me my vol. I tried also to start with compatibility for Win Vista SP1 and 2 settings, as well as Win XP.  I can't get my WinTv Nova-t work either which suggests that it is a graphics problem.

  Hi AMrita,
  I always had the problem last night but I was check the forums and I now after much deliberation to be fixed.  When I go into the Device Manager, I checked all the drivers including the audio player and I was informed that they were all updated and works very well.  Although I had sounds and music I check the setting in 'Control Panel', but this is no software not loaded and nothing is even not a mistake.  I then tried to download the latest software and driver from Realtek for Audio ALC888 and got the following error while installing - an error (-5009: 0x8002802b occurred) previous installation did not finish.  On Googling this error I found a solution in one of the forums that was as follows: to

  Delete C:\Program Files\Common Files\InstallShield\Professional\Runtime - folder or rename it, just in case.

  and then run the windows 7 install for the sound card Realtek and it is now successfully downloaded.  The PC restarts, I started FSX and now its running fine.

  Thanks for the help... got in the end and think I could play music and watch a movie and the sound was very good.

• In my office windows 8.1 settings I'll be able to get the menu and the Start button in windows 7

  I was informed that at the click of a button, I can get the old start button and menu on my desktop windows 8.1. Is it true in this, or I was quite a line by a seller?  Thanks for any help.

  You will need to download the classic interface:

  http://www.classicshell.NET/

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• On windows, the command prompt window (XP) start appears and closes what can be the problem

  On windows, the command prompt window (XP) start appears and closes with 2 to 3 seconds what can be the problem

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you put the computer in mode normal startup such as suggested in the article.

  Check if that helps.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973