Start or stop the conditional statement

Similar Questions

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Mr President.

  Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Concerning

  have you looked at

  http://www.Java-n-me.com/2014/02/GlassFish-extension-for-JDeveloper-12C-go-live.html

• Is it possible to start and stop the servers without using nodemanager?

  Is it possible to start and stop the servers without using nodemanager? If so, how?

  Hello

  Please follow the link below, it will be useful

  http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

  Concerning
  Fabian

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• spend the conditional statements

  Hello everyone I've been working on a duty where we created a game of the match.  It is for me to find a way to tell the script action what difficulties the game of the user of the game to.  There are 3 easy buttons, mediym, hard.  Each sets out an increased number of cards say 4 to 8 easy for way etc.

  We are supposed to use the conditional switch to do this.  My problem is how do you know what button was clicked the switch?

  Here's the code so far, he is only set up for the easy right now.  It works fine until I tried to set up the switch.

  Thanks for any help you might be able to give.

  package {}

  import flash.display.MovieClip;

  import flash.display.Sprite;

  import flash.events. *;

  import flash.text.TextField;

  import flash.utils.Timer;

  import flash.utils.getTimer;

  import flash.media.Sound;

  SerializableAttribute public class Match extends MovieClip {}

  var showingCard:Card = null;

  const DELAY_TIME = 1000;

  public void Match() {}

  trace ("Match");

  introscreen.btnMenu.btnEasy.addEventListener

  addChild (introScreen);

  If a card is displayed showingCard refers to it

  card otherwise

  introScreen.btnMenu.btnEasy.addEventListener (MouseEvent.CLICK, onClickButton);

  } / / end of the constructor

  function onClickButton(e:MouseEvent):void {}

  trace ("onClickButton");

  {Switch (e.Target.Level)}

  'easy ': case study

  layoutCards (2);

  break;

  }

  }

  //

  function layoutCards(gridSize:int):void {}

  trace ("layoutCards");

  put gameScreenOnTop

  addChild (gameScreen);

  creat bridge of the faceValues valid

  var Bridge: Array = [];

  var lastFrame:int = gridSize * gridSize / 2 + 1;

  for (var k: int = 2; k < = lastFrame; k ++) {}

  Deck.push (k, k);

  }

  trace (Deck);

  layout maps

  for (var i: int = 0; i < gridSize; i ++) {}

  for (var j: int = 0; j < gridSize; j ++) {}

  trace (i, j);

  Map: map of var = new Card();

  size

  Card.Width = stage.stageWidth/gridSize;

  Card.Height = stage.stageHeight/gridSize;

  location

  Card.x = i * card.width;

  Card.y = j * card.height;

  important assign a face value, drawn randomly from the deck

  card.faceValue = randomInteger (2.19).

  card.faceValue = deck.splice (randomInteger (0, deck.length - 1), 1);

  Listening

  card.addEventListener (MouseEvent.CLICK, onClickCard);

  Add

  card.gotoAndStop (1)

  gameScreen.addChild (card);

  } //j

  } //i

  } / / end of method of positioning cards

  makecard start clickable

  function onClickCard (e:MouseEvent) {}

  trace ("onClickCard");

  var clickedCard:Card = (e.target) Card;

  Turn the card clicked

  clickedCard.visible = false;

  Click on the first map in pair

  3 cases

  1 card clicked is the first in the bet

  See the map and remomber it

  make it not clickable at the moment

  If (showingCard == null) {}

  trace ("FirstCard")

  clickedCard.gotoAndStop (clickedCard.faceValue); external

  showingCard = clickedCard; internal

  clickedCard.removeEventListener (MouseEvent.CLICK, onClickCard);

  }

  2A - click map is a second pair, and friendly the FirstMatch

  both take-out

  Else if (clickedCard.faceValue == showingCard.faceValue) {}

  trace ("match")

  gameScreen.removeChild (clickedCard);

  gameScreen.removeChild (showingCard);

  showingCard = null;

  }

  2B - clickedCard is second and not a match for the first.

  Return both

  else {}

  clickedCard.gotoAndStop (clickedCard.faceValue);

  freeX during a short period of time

  addChild (blockScreen);

  var: timer = new Timer(DELAY_TIME,1);

  timer.addEventListener (TimerEvent.TIMER,

  function onTimer(e:Event) {function //annonymus

  delay this code

  clickedCard.gotoAndStop (1);

  showingCard.gotoAndStop (1);

  clickable map list

  showingCard.addEventListener (MouseEvent.CLICK, onClickCard);

  showingCard = null;

  addChild (gameScreen);

  }

  );

  Timer.Start ();

  }

  }

  } / / Match class

  } / / packages

  When I click on the easy button in the swf file I get this message.

  ReferenceError: Error #1069: property not found on flash.display.SimpleButton level and there is no default value.

  to Match / onClickButton)

  The switch statement checks the 'e.target.level' to see which option has been selected, the part level of this being the word "Easy" or anything else.  e.Target points to the object that sent the event, which seems to be a SimpleButton object.  But a SimpleButton object cannot have the properties created for her as a movieclip can, in order to verify his 'level' property is looking for something that is not normally.

  Where assign you the level of ownership, of what object it give you?

  (hindsight: don't want to jump on the reaction of Dave.)  This meets an ask me if... I always check before submitting a message to see if someone answered while I was devise a response and normally go back on the forum to check... If if I don't post unless there is a marked difference is answers this time I just went back one level and not seen no response, so I thought that none received... it looks like going back to the forum is the right path to follow)

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• Start and stop the ASM in a standalone environment

  Hello

  I installed just 11 GR 2 grid Infrastructure and ASM you have running.

  Q1. How I closed ASM correctly? So far I have

  stop the + ASM instance

  stop the listener

  However I always seem to have a number of processes that are running

  Grid1 6184 1 0 10:53?        19:00:00 /home/app/oracle/product/11.2.0/grid/bin/ohasd.bin restart

  Grid1 6338 1 0 10:54?        00:00:31 /home/app/oracle/product/11.2.0/grid/bin/oraagent.bin

  Grid1 6351 1 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmd.bin

  Grid1 6387 6351 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmlogger.bin o /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.info-l /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.log

  Grid1 6883 1 0 10:57?        00:00:05 /home/app/oracle/product/11.2.0/grid/bin/cssdagent

  Grid1 6897 1 0 10:57?        00:00:01 /home/app/oracle/product/11.2.0/grid/bin/ocssd.bin

  When I do = >

  Grid1 [+ ASM] > ASM srvctl status

  ASM is not running.

  Q2. What are the processes above, and how to close properly?

  Q3. What is the procedure for starting a ASM?

  any help appreciated,

  Jim

  
  

  Look for the command

  crsctl stop

• Procedure of the ODI - Bind Variables in the conditional statements

  In an ODI procedure, is it possible to add a conditional statement around bind variable?  For example, if I use OdiOutFile as the command on the target and Oracle as the command on the Source, I can use bind variables to fill the data in this table (we are in fact using OdiInvokeWebService and passing a XML structure very complex, but it's easier for testing):

  OdiOutFile-FILE = C: / TEST. TXT

  < person >

  < first > #FIRSTNAME < / first >

  < Middle > #MIDDLENAME < / Middle >

  < last > #LASTNAME < / last >

  < / person >

  It is a way to add a conditional statement using one of these bind variables?  For example, if I wanted to test #MIDDLENAME null and null value, produced this portion of XML, such as:

  OdiOutFile-FILE = C: / TEST. TXT

  < person >

  < first > #FIRSTNAME < / first >

  < % if (#MIDDLENAME! = null) {% >}

  < Middle > #MIDDLENAME < / Middle >

  < %} % >

  < last > #LASTNAME < / last >

  < / person >

  This type of scriptlet syntax seems to work fine, as long as the binding variable is not in the mix (if I put "true is true" or "true == false" in the case, it shows or does not show this line in the XML file, as expected).  I use ODI 11.1.1.7.0

  ----------------------

  Post edited by: KevinPratt

  Thanks for the reply!  As suggested, in what follows, I changed the command and it works as you want

  OdiOutFile-FILE = C: / TEST. TXT-APPEND

  < person >

  < first > #FIRSTNAME < / first >

  < @ if (!) (("#MIDDLENAME".equals(""))) {@ >}

  < Middle > #MIDDLENAME < / Middle >

  {< @} @ >

  < last > #LASTNAME < / last >

  < / person >

  Using the syntax <@ ...="" @="">serve your purpose. Also, I think you might want to include the variable binding in the quotation to avoid syntax errors.

• How to start and stop the APEX?

  Hi all! I am new to this forum and APEX too...

  We are runing (Version: Application Express 4.1.1.00.23)

  I need to reboot the server.

  How can I stop APEX graciously and start back after? Thank you!

  Kind regards

  Ghyslain salvation,

  to reinforce what Mike says. Apex is a database and, with the exception of the HTTP server application, runs entirely on the database. (Note with EPG, its all in the database) It contained in the users/schemas database and built items of data such as tables and PL/SQL packages. If the server that is running the Oracle database in which the Apex is installed needs to be restarted, the database must be stopped, which stops indeed Apex. If the HTTP server is also running on this server (ESS or earpiece of the Apex) then this should be stop as well.

  Of course, if your desire is not to stop the database, but to deny the user access to the Apex, perhaps for purposes of maintenance of database, then this can be done by stopping the HTTP server or by stopping the EPG.

  I hope it is clear now.

  André

• How to create services start and stop the script of automation for different servers

  Hi all
  
  I want to create a file bat for automation object, start and stop services
  I have some services in 1 server and a server in 2nd and some servers in 3rd.
  has you all know that I have to follow the sequence to start and stop services can all help me in creating .bat combining 3 servers fo start and collapses of the services.
  
  Thanks in advance
  
  Concerning
  SM

  the location of your batch file should not matter

• Starting and stopping the process GG

  GG admin guide I understand we can start/stop the GG (excerpt, pump, Replicat) procedures through shell scripts, and it is mentioned that it can be invoked from a script to start/stop/go. Are there restrictions on these operations?
  
  We intend to implement the process of stop/start GG in our application scenario where you need to update the source DB (and thus the target DB also) through a batch process at regular intervals (once a week, can also be less frequent). The plan is the first above mentioned stop GG process, update source DB with the latest data, transfer data to target the DB using exp/imp, restart GG treats using the SNA option after. All these steps are automated.
  
  From the tests above of initial works but don't know if GG power operation is strong enough to manage the scenarios on a regular basis and will work. Are there known issues with these operations such as disorders while implementation power which makes it unfit for use through scripts like the one mentioned above.
  
  Enjoy all the entries in the present.
  
  Thank you

  The process can be run from the command line and are just as reliable as any other executable UNIX regarding commissioning correctly if all the prerequisites are met.

  To launch the Manager from the command line
  To run the management of the control of the operating system interface, use the following syntax.
  Bishop paramfile [ reportfile]

  On the source and target systems, publishes one of the following sets of commands
  in the process, you are a beginner. Run the Oracle programs
  Directory of GoldenGate.
  extract paramfile .prm reportfile .rpt [Pei ]
  or...
  replicat paramfile .prm reportfile .rpt

  You can automate the monitoring, and it's an exercise as any monitoring process (for example, the tail of the alerts log and grep for errors ORA, logs of web server of grep, etc..). You can see extract and replicat upstairs / ongoing run, so you can also use Director (Management Pack).

• How to start and stop the timer by using the keyboard.

  Hello, I would really like to help please, I have

  here to launch a program whereby I press a key

  which starts the timer and press another button to stop the timer, the

  delay is displayed and used to move an object on the phase on the delay dependant.

  Thank you

  Attach a listener of events on the stage of your film.

  stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

  1 if you want any key, so you don't need a key code.

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  2. If you want the same key to both use a Boolean value like this:

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == MyKey) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  }

  3. If you want two different keys

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == myStartKey) {}

  start my Countdown

  } Else if (event.keyCode == myStopKey) {}

  Cancel and reset my timer

  }

  }

  }

• Satellite A30 554: start and stop the question automatically

  After about a year of use my computer laptop (Satellite A30 554) started having problems with the starter. Quite often when I turn it on cooler starts working and the LEDs are showing that the computer is on, but the screen remains black. Sometimes, I need to turn off the PC and on a couple of times so that he can start to begin. What is the reason for this and can it be resolved?

  Once I had a problem with this computer off by itself while working, which was not caused by a virus. Some people advised me to vacuum clean :) under cooler. I did and it helped.

  The problem was supposed to be linked to the dust on the heatsink, which does not allow that it works correctly. The current problem also connectable to the cooler, or is - it a motherboard problem?

  Hello

  Generally speaking, if it starts and does even not initializing the monitor, or starts and turns off immediately, it could be the motherboard. It helps to remove each device at a time and try to start the computer. Sometimes when the parts become defective they still affect the ability to start. If, after removing all devices, that the problem persists, then your motherboard is faulty and must be replaced. Hope that fix you the problem.