Start target not found Menu_Shortcut

Similar Questions

• RMAN-20001: target not found in the recovery catalog database

  I'm practicing the loss of all control files. I have backups of catalog rman configured for controlfile autobackup. So far, I did this.
  
  
  RMAN > startup nomount;
  Oracle instance started
  
  Total System Global Area 209715200 bytes
  
  Bytes of size 1272864 fixed
  155190240 variable size bytes
  Buffers 50331648 database bytes
  Redo buffers 2920448 bytes
  
  
  RMAN > restore controlfile autobackup.
  
  From restoration to SEPT. 08.-10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 156 devtype = DISK
  
  field of recovery destination: / u02/flash_recovery
  name of database (or unique name of database) used for research: TEST
  channel ORA_DISK_1: autobackup found in the recovery area
  channel ORA_DISK_1: autobackup found: /u02/flash_recovery/TEST/autobackup/2009_12_09/o1_mf_s_705171034_5l0kgv4o_.bkp
  channel ORA_DISK_1: restore full automatic backup of control file
  output filename=/u02/control_files/TEST/control02.ctl
  output filename=/u03/oradata/TEST/control03.ctl
  Restoration finished in 08-SEVEN.-10
  
  RMAN > change the editing of the database;
  
  mounted database
  output channel: ORA_DISK_1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 08/09/2010 14:54:50
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20001: target not found in the recovery catalog database
  
  
  I guess it has something to do with the DBID but... I don't have and I do not know how to find.

  Hello
  Try this
  RMAN > Connect target /.
  RMAN > Connect catalog rman/rman@test
  RMAN > startup nomount;
  RMAN > list backup of controlfile;

• Portege R830 - external HARD disk error - "target not found device.

  Hi all

  I recently bought a 1HD R830 which has windows 7 as its OS.
  I have a few old external hard disks that were formatted on windows vista.

  When I try to use it on my new computer it says "target not found device.
  I called support for the external hardrive, who said this is an incompatibility problem and that I would need to re format external hard drives (and therefore lose all about them unless I copied them on a compatible hard drive).
  Is this true?

  Rather than go through the hassle to copy all data to another hard drive is there a way to make my new computer compatible with the external hard drive?

  Your help is very appreciated.

  See you soon,.

  Jason

  I have an old drive external HARD with images recorded on it and I use it for years with WXP, Vista, Win7 and now with Win8 too. There is no problem at all so I put t understand what could be wrong with your HARD drive.

  Do you have similar problems with other external devices connected to your laptop Portege?

• Re: New SD-R6472 satellite 1800-100 - player target not found

  Hi fans of Toshiba

  I have a Satellite 1800-100 and bought a Player DVD SD-R6472
  I downloaded the SD-R6472 csel changer program but cannot execute it.
  It says "target drive is not found.

  I have already download the latest version of the bios

  Anyone know what to do next?
  It would be much appreciated if someone could help me on this

  Best regards
  Chris

  There is a simple explanation; the firmware that you use is simply not compatible with your SD-R6472 drive.

  I don t think you will succeed to Flash the drives settings.
  Is that these tools is not available on the Toshiba page and I doubt that any software 3rd party would be able to do this

  Before you buy a CD/DVD drive, you must make sure that such ODD would be compatible with your laptop.
  In my manual, I have found information on compatible players.
  Maybe your user manual would provide info on the STRANGE compatible too
  If this isn't the case, then you should contact the Toshiba ASP for information on compatible CD/DVD players.

  Have a nice Weekend

• Pavilion g7 1083rn: help! Laptop will not start. Not found boot device!

  My laptop has been working well but super slow lately. Just today, I turned on and automatically noticed it was different and weird like that clicking sound I've ever heard before. When I tried to turn it on, it says device not found Boot. Then I restarted and it put on normal but then said it was a mistake and I went back to the black boot device not found screen. What can I do? I don't have a cd to fix it.

  Thank you, yes it's my hard drive :/

• "Error starting Module not found" add external jar to eclipse plugin

  Hello

  I use the eclipse on Eclipse 3.4 plugin

  BB JDE 4.5

  8300 Simulator

  I'm trying to run a Midlet that sucessfully runs in eclipse for another smartphone (Samsung).

  The project compiles fine, but when I run it in the BB Simulator, it gives me the error:

  "error at startup MyApp: Module ' kxml2 - 2.3.0' not found."

  I added a jar for kmxl in the form of external jar file.

  Sometimes it get lost, don't know why. I had to add the jar file several times because once so that it cannot compile and it disappears from the list of libraries.

  In any case, the major problem is that he cannot run in the Simulator.

  I found several posts with the same problem, but the solutions they gave are JDE, not eclipse plugin.

  These solutions were to create a new project, made a library of BB and understand the project as a dependency in the main application.

  But how to solve the problem in plugin eclipse?

  Why add a pot as an external library is not enough?

  Why get lost from time to time?

  If we are to create a new project (it seems excessive to me thinking) how can we define everything in eclipse?

  Thank you

  Anna

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=22240#M22240

  Concerning

  Bika

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• Since upgrading to FireFox 6, I can't start Firefox in Avast Sandbox - get the error "this application has failed to start because xul.dll not found." Firefox works well outside Avast Sandbox.

  The error box has the right
  Firefox.exe - Unable to locate component.
  He suggests reinstalling might fix the problem, but I've uninstalled and reinstalled firefox a number of times and no change.

  problem is Firefox works outside the sandbox avast, but inside the sandbox, xul.dll file is not found

  It is solved with these steps... some may be unnecessary
  (1) uninstalled Firefox
  (2) downloaded the latest version of FF (6.02) and installed
  (3) open the Avast user interface > extra Protection (in Avast v6) > Sandbox > Expert settings (button) > Web browsers > (in maintenance) "remove content" (button)
  (4) disconnected from Windows
  (5) connected and Firefox started in the sandbox

  It might be that the first 2 steps are not needed... but that's what I did and the problem was solved. As you can see in the screenshot, Firefox is virtualized successfully

• BOOTMGR not found - cannot start Windows

  I have a similar problem...

  Start the computer and I get:-BOOTMGR not found... Press Ctrl + Alt + Del

  I put the Toshiba recovery disc in and it registered no operating system... I finally gave up and removed the completely hardrive and tried to install the backup disk... now I have a disk backup who thinks the computer is empty, a Toshiba Recovery disk which does list not all operating systems and asks me to install the drivers... which of course - I don't have an operating system disk that we are not given when we buy the computer...

  I have nothing more than a silly recovery disk which is not useful to the plastic that it is written on... and a computer which has nothing on the hard drive and no operating system to all the...

  I was thinking of buying another drive in Vista or maybe a new windows 7 one... but what guarrantee do I think it will work...? I could spend $ 500 for no results...

  I searched the internet for months looking for an answer, and everyone seems to mean the same thing... Operating the drive should be issued when the computer is purchased...

  Jaz

  Hi Jaz70,

  First of all, it would be interesting to know if another disc would work. Perhaps your CD/DVD drive doesn t work properly so she wouldn t read any type of disc.
  Check this box!

  In addition, you can try to clean the disc or let's say the lens using a microfibre cloth. Sometimes it works

  If you buy a Microsoft Windows disk it won't cost $500. ;)
  These discs are not so expensive.

• Satellite C660 - 2 EV starts plus-Boot not found Bishop

  I don't know how but my grandson has seriously broken the Satellite C660 - 2 EV

  Boot from the disk - Boot Mgr not found

  Boot from the recovery partition - Boot Mgr not found.

  Boot from an installation (generic) Windows 7 disk - boots, begins to install, finds, he does not have a required driver (but don't tell me what it is). Allows me to access the drives C:, D:, E:, and X:

  Boot from recovery Toshiba DVD. White bar gets about 25% on the whole of the screen then stops with "You have removed a USB support during installation" (or something like that, laptop currently in pieces).

  Removed and replaced the memory and DVD player. Removal of the HARD drive connected to my PC via the USB adapter and scanned the two visible partitions (300 GB each) at the level of bad sector. No problems.

  Help! I'm out of options.

  Laptop must be functional (basically) as it starts from DVD (non-Toshiba).

  HARD drive seems OK when verified externally and start (Non-Toshiba)

  What remains?

  Everything that you have done is good, and I would do the same tests.

  The value of the default BIOS and test it with another HARD disk, if you can get one for testing purposes.
  I can't say for sure, but somehow, I feel THAT HDD is the troublemaker.
  Try installing the DVD of initial recovery on the new HARD drive.

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• L10 start problem - "SHDOCVW.dll is not found.

  When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.

  Hello

  Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html

  I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll

  You will find a brief explanation how to do this.

  Good luck!

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?