start the JRUN4 problem

Similar Questions

• X 51 starts, the potential problems of 660 GTX.

  Computer is only a few days old - Alienware x51.
  

  First thing I did was install the drivers recommended to me from the dell site after entering my service tag and OS - Windows 8 64bit. The video card driver that dell told me to install was 307.07.
  

  The next day, whilst playing a game, the screen froze and became covered in blue squares before restarting. Upon restart during the bios loading, the screen is covered in horizontal blue lines. Once bios loading has finished and windows starts trying to load the screen goes black and my monitor does not recognise my computer even though when i unplug the VGA it knows that is is unplugged. The computer will remain on with the screen black until I hold down the power button. Monitor and cable are running fine. this happened each time i tried to start the computer. After leaving it be for a few hours it turned on normally again. Thinking it was an overheating or a driver issue with my gtx 660 I installed a gpu temp program - Temps reached mid 70C during intense gaming. I also then went to the nvidia site and updated to the latest gtx 60 driver - 310.90 instead of 307.07. Around this point after installing some new apps etc i started to get constant blue screens, either - driver verifier detected violation or unexpected kernal mode trap. After removing my 3rd party anti virus and settling with windows defender this somewhat remedied the blue screen problem.
  

  I then ran a video card stress test from the dell site. Part way through the test the screen froze with blue (and yellow/red) squares, requiring a restart. upon restart the screen had the same blue line on it and would not start. after a few goes it eventually did.
  

  Then during a skype video call I had the screen freeze with the blue squares again before restarting itself. The blue lines appear on start up again during the bios load before the screen going black. This has stayed this way and i have not been able to turn it on.
  

  I turned the computer on and through holding F8 navigated my way to restoring my system using the alienrespawn in order the restore my pc to how it was when it was sent to me (without the drivers I installed).
  

  However, this did not work and i still can not turn the computer on as the blue lines appear and the screen still goes black .
  

  Additionally, now I cant enter safe mode as I need to finish setting up windows (entering country and email etc like I had to when I first turned it on).
  

  I have waited half a day and the same still happens - during bios load horizontal blue lines. after bios load screen goes black, computer stays on, requires forced shut down.
  

  I have emailed tech support and am waiting on their response also.
  

  Intel Core i7-3770 3.4GHz, 8GB (2 X 4GB) Dual Channel DDR3 up to 1600MHz, 1.5GB GDDR5 NVIDIA GeForce GTX 660, 1TB SATA 3Gb/s (7,200RPM) 32MB Cache, Windows 8, 64-bit, English.
  

  I had the GPU replaced, and haven had any problems since.

  My theory as to why the first GPU did not work, it's that the fan would not increase to cool. So when I played a demanding game it has overheated and fried.

  I am using MSI afterburner with the new GPU, to set a more conservative fan speed and keep it cool.

• start the browser problem

  So my laptop opened randomly my web browser with a bunch of tabs leading to a website and I don't know what is the cause. Ive used windows Defender to do as well a full and quick scan and it found nothing but the problem continues. I have also noticed that if I'm away from the laptop long enough it opens again. Can someone help find a solution to end this problem?

  Here are the Web sites he opens:
  https://fbcdn-sphotos-a-a.akamaihd.NET/hphotos-AK-AsH3/hellocdn.html?v=1
  https://photos-a.XX.fbcdn.NET/hphotos-prn1/hellocdn.html?v=1
  https://fbcdn-sphotos-a-a.akamaihd.NET/hphotos-AK-prn1/hellocdn.html?v=1
  https://fbcdn-photos-a-a.akamaihd.NET/hphotos-AK-prn1/hellocdn.html?v=1

  Well no, but gave you the idea to uninstall messenger facebook and it worked then problem solved even if someone should report this to facebook or something.

• Equium A100-027 - failed to start the game - problem with NVidia

  First of all, sorry I had no idea where to post this.

  Basically, I was downloading a game and I got a message saying "running low on disk space delete some programs".
  I had no idea what half of it was then I deleted things that I don't use.
  NVIDIA resembled something I don't use.

  So I deleted it and my screen became tense and it seems that I blew it.
  Then I accidentally restarted my laptop - so I lost all my game downloads.

  Then when loading again once I got a prompt saying to insert a disc video controller.
  I don't have anything, and so I chose 'I did not - find another soloution. If windows me was asking for help from Toshiba.

  I guess I have to download NVIDIA and the correct version I had, which again, I have no idea.

  Maybe I'm wrong? I need something!

  Any help much appreciated.

  Hello

  Maybe you could tell me what model of phone you have?

  > So I deleted it and my screen became tense and it seems that I blew it.
  Yes, it seems you muddled everything

  > So when load once again I had a saying invite to insert a disc video controller.
  I don t know what this could mean but eventually the graphic card driver is necessary and that's why I recommend you visit Toshiba's European disk page, choose your phone model and to download and install the graphics driver.

  Welcome them

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• I get an error message at the beginning: "Problem starting C:\Program Data\IntelBackup Online.dll"

  Original title: I get an error message at the beginning upward:

  "Problem starting C:\Program Data\IntelBackup Online.dll" under this line, it is said: 'the Spicific mode is not found' how can I fix?

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• Whenever I try to start the media player, it was closed due to a problem.

  Original title: windows media player

  Whenever I try to start the media player, it was closed due to a problem.

  Hello

  (a) you receive an error message?

  (b) when was the last time it was working fine?

  (c) you did any hardware changes or software on your machine before this problem?

  (d) what operating system do you use?

  Method 1: I suggest to try the steps in the link below and check if this can help:

  Troubleshooting of Windows Media Player settings (it applies to Windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Try to solve this problem with boot.

  See the following Microsoft KB article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information is useful.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Original Titus: cannot install software blackberry "BOLD"

  When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

  Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

  End of quote

  What data means this error report contain?

  Why should I report to Microsoft?

  I received error below during the repair software blackberry

  Quote: The path:

  ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

  End of quote

  No path

  Hi ZiaHL,

  Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

  "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

  You can also view the article mentioned below for more information:

   

  BlackBerry Desktop Software issues fixed in this release

  http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

  Let us know if that helps.

• Why the message (wuauclt.exe has encountered a problem and needs to close) when I start the computer?

  Operating system - XP

  Message asking if I want to send the problem to Microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• Have a computer dell laptop. try to install the printer but the spooler is not running. I started the spooler, but it will not start. What is the problem

  I want to install a Hp deskjet printer downloaded 1000 Hp and installed, software is gone at the end of the installation and can not end spooler spooler running nut or an rpc error. Had a Hp technician to try to set up the printer spooler, but he will not remain in the start mode. I have restored the computer to a previous restore point and reinstall the software of the printer again, but have the same problems.

  Hello

  What exactly happens when you try to print? Error message? Previous post the exact error message.

  Step 1: Run the fix it tool in the following article and check.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Get the following error on reboot of the computer: Windows did not start because of a configuration of the disk of the computer problem

  Original title: where can I download iso windows xp recovery CD

  I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
  Windows did not start because of a configuration of the disk of the computer problem.

  Could not read from the selected boot disk. Check the hardware path and startup disk.

  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  So I need an iso file XP Recovery.
  I can simply copy the iso files on USB and start with usb?

  Hello

  1. don't you make changes on the computer before this problem?

  First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW