Start the portable system

Similar Questions

• FRM-18105: failed to start the help system

  Hello

  I'm in Oracle Forms 11.1.2.0 you try to start the help system and getting the error message below.

  FRM-18105: failed to start the help system.

  I have to check the registry entries or system variables?

  Thank you

  This issue is finally resolved. After I compared the FORMS_BUILDER_CLASSPATH variables in the environment vs registry Variables, I found I was missing C:\Oracle\Middleware\oracle_common\doc\online_help\oracle_forms in the registry. After that I added it it still didn't fix it. Then I found that entry C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar was pointing at my old House, so I have fixed to point to Oracle_FRHome instead of Oracle_FRHome1 and my forms launched immediately. Thanks for listening)

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• Cannot start the operating system

  Hi everyone, I've seen many similar scenarios. Not sure if mine is unique. I do not get a syntax error as others, and this was not due to the update of windows. Our suddenly stopped working.  I tried knocking PF12 w/out of the options for safe mode and couldn't get to a MSDOS command prompt I just get blank screen.  I have the CD to our computer that comes with it when we bought there are records of the operating system, but do not say recovery or restart the disk label so I didn't know if she would it reboot or rewrite it. All ideas and comments are greatly appreciated.

  Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Do you have critical data on the backup computer?

  If this is not the case, press the "F8" key after the computer starts:

  support.Microsoft.com/kb/307852

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remove windows vista without starting the operating system

  Hello! IAM using windows vista. Lately, I just figured that the computer has the virus iam so think upgrade to windows7 and I want to remove vista first. Is it possible to remove vista without starting? Sombody help please! Thank you!

  Hello

  1. you must have an operating system to be upgraded; in your case vista

  You cannot delete vista

  2. an upgrade is performed from an operating system of windows in your vista case, unless microsoft advises otherwise; does not apply in your case

  solve your problem of malware or clean reinstall vista 1st - then upgrade

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ____________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  ___________________________________________________

  information about windows 7

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Y at - it a startup of microsoft for windows vista premium disc which is downloadable on a computer to start the operating system when the HD does not start

  Since 2007, I have packard bell computer pc laptop. He came with a recovery or a bootable disc, but the genuine license is stuck under the machine. After System Restore today and a computer virus scan went to a reboot. But a black screen with the boot failure lights. I am unable to go to safemode, viaF8 or something else. He invites me to insert the recovery disk. What I can do besides take it to the seller. I have another laptop using windows vista can I create a recovery or startup disk that is compatible with this laptop. Waiting for your kind response

  NeoSmart is a very good drive to do a Startup Repair with.

  BUT it will not reinstall your operating system.

  For this, you need your computer manufacturer's recovery disks, or use a built-in recovery Partition.

  Read this info below:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to change Windows 7 Boot Manager options to start the operating system automatically?

  I recently installed windows 7.  When boot to windows 7 my computer goes to the Boot Manager and ask me to choose the operating system.  I tried to remove the previous OS, but windows 7 does not start automatically.  What can I do?

  Hello

  To make your Windows start directly without prompting for the splash screen, follow the steps below:

  1. click on start

  2. click on Control Panel

  3. click on system and security

  4. click on System

  5. click on system settings advanced (on the left pane), and then click the Advanced tab

  6. under Startup and recovery, click settings

  7. now uncheck the box "Time to display list of operating systems" then click apply and then click Ok.

  For reference, click on the following link:

  Change the default operating system for startup (multiboot)

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• Start the EPM system

  I work in 11.1.2.1 in a distributed environment. When I click on the 'Start EPM System' shortcut in the menu programs, it starts only local services and not the services on the other two servers. I have some other problems with the environment, and I wonder if something prevents all services in the distributed environment to start.
  
  So I guess the question is: is this shortcut to start all services in a distributed environment? In other environments for the same customer, seems to be the case.
  
  Thanks for your time.

  He will begin the EPM service on the machine, it runs, if you want to start the services on multiple computers, you can develop your own scripts.

  Documentation
  "Running the unique on a computer startup script in your system deployment EPM starts all EPM system services installed on this computer."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot start the operating system preinstalled on Satellite L350-170

  Hello!

  Today I was surfing on the internet on MSN etc and my phone froze. I tried control, alt, delete etc and nothing happened so I finally pushed the power button.

  When I turn on the laptop now I get this:

  * Windows Error Recovery *.

  * Windows cannot start. A recent hardware or software change might be the cause.*

  * If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the people was interrupted during startup, choose Start Windows Normally.*

  * (Use the arrows to select your choice.) *

  Launch Startup Repair (recommended) *.
  * Start Windows normally *.

  When I choose the first option (startup to launch repair) a loading bar comes up saying "Windows is loading files...". ': then a loading bar "Microsoft Corporation", then this charge and brings me to a gray screen:

  http://i43.Tinypic.com/23jspqe.jpg

  When I select the second option (start Windows normally), I just get this loading bar for ages, and that the bar is load from the top down, I kept it at least half an hour, a few times and it still remains on the loading below bar:

  http://i43.Tinypic.com/sw3jbt.jpg

  Any help is much appreciated, thank you!

  Hello

  Start your laptop and press F8 to display the advanced startup options.
  Option repair my computer is available?

  If so this option allows to enter system recovery option. There is option called Startup Repair. Try using this option to solve this problem.

  Let me know if this will help.

• Start the reboot system (Win 7 Pro)

  Hello guys,.

  I have a problem with my windows 7 pro. Every morning I start my laptop starts Windows logo appears and then the screen goes black, it rest for a little whilethat and certain sounds occur as a click or something and feed a compromised system. I again press power button laptop starts this time black screen comes with a message to RUN the STARTUP REPAIR . I press on enter he ask to repair the system and solve the problems. I click ok. and after a while my system reboots normally.

  Even more later in the day I stop / start laptop, it doesn't work perfectly normally No problem to run the Startup Repair tool .

  But the next day in the morning again same problem occurs.

  Query:

  1. what should I do?

  2. What can be done?

  3. how to do?

  4. download and install Windows 10 update will fix this problem permanently?

  Thank you in advance

  ydeepk

  Hello

  Update does not normally solve the problems.

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline crack motherboard, graphics card, connectors, etc., which become obvious once it warms OR cools.

  I wish I had the material under test.

  See you soon.

• Windows 7 does not start the form system recovery disk

  Hi everyone, I've been strugglling for weeks with W7 on my Samsung Series5 Ultrabook.  Windows Update will not install, start slow, freezes the closure. I've tried several - clean start, check the disk, windows Diagnostics...  Have had a complete virus check done by McAfee

  Now, I decided to reinstall W7, origibal system recovery disk, but that freezes too. I changed the priorities of the BIOS, but the external CD began to turn, but it is ignored and windows starts normally (when he does...).  If I run the application recovery it windows disk, it crashes.  Winsows update for the moment blocked on KB2952664 that won't install.

  Please help... Thanks Pietro

  Try to restart you computer and press F4, it should start in recovery mode.

• Satellite M60-167 cannot start the operating system

  The name of the model Satellite M60-167.

  Laptop turns off after a few minutes of work.
  Then I format C with Windows XP Pro, but it turns off as before.

  I did not finished the instalation and now I can't enter to finish.
  I had only blue screen same not the Toshiba screen on start.

  Can not enter the bios as well.

  Please help if you can and thanks for all!

  Post edited by: cota26

  Hello

  > Laptop computer just turn off after a few minutes of work.
  > Then I format C with Windows XP Pro, but it turns off as before.

  I think this sentence is the key description resembles your laptop could overheat and automatically stops.
  Why is this happening? Well, the laptop could overheat temperature high inside the laptop. It will stop automatically to prevent the equipment from damage.

  My long experience, a clogged cooling fans could be responsible for the bad cooling and the temperature high.

  So what to do?  :|
  In my opinion, he must clean the fans to get rid of dust and debris.

  The jet of compressed air is very useful tool and could help you to clean the fans.

  Hope this helps to get the laptop running.

• Laptop screen out of phase, only in normal when starting the operating system loaded, how to fix?

  My laptop screen guard flicking down, as if she were in phase opposition when the normal mode is responsible, when I use the modes safe, that the screen is fine and authorized to use, what can I do to fix this?

  Thank you
  Jack

  Try updating your graphics card:

  Go to the support site for your computer manufacturer and download the latest driver for your graphics card specific to your operating system (Vista 32 or 64 bit). Looking for instructions on the site of support on how to uninstall and install the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Help, please! A master hard disk partition information lost and cannot start the Vista system

  I have Vista with my dell desktop computer.  I guess I got a virus that has deleted/messed my main hard drive.  All of sudden my computer was dead and when I try to restart, I found I can't boot the system.  I loaded the DVD for the resettlement of Dell to come with the computer and try to install it.  But it shows "Disk 0 unallocated space" with 222 GB and 'Disk 0 Partition 2 Recovery' with 10 GB.  I could not install Vista on the first, as it says "Windows must be installed on a partition formatted in NTFS.

  How could I solve this problem?  I could not allow me to format the drive because there a lot of data, that I just can't lose.

  Any help is very welcome!

  Marco

  http://support.Dell.com/

  Problem with the recovery process, contact Dell at the link above.

  It's recovery process from Dell, NOT Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon...

  Mick Murphy - Microsoft partner

• Cannot start the schedular system of BI. showing 1064 error & log error: there was a sharing violation

  Hello

  My BI services are properly worked yesterday. but schedular service BI abruptly stopped today. and when I try to restart the schedular BI it is showing error as white

  "An execption occurred in the service when the application for review".

  I checked my logfile schedular system. It is showing the error message as below

  2013-09-16 10:22:35

  [nQSError: 61013] File error: path=C:\OracleBIData\tmp\NQTransMgrTemp.rpd, code = 32: there has been a sharing violation.

  2013-09-16 10:22:35

  Planner error [68008]: [nQSError: 61013] file error: path=C:\OracleBIData\tmp\NQTransMgrTemp.rpd, code = 32: there has been a sharing violation.

  2013-09-16 10:23:12

  Help please..!

  Kind regards

  Satya

  As I open & performed offline Exchange when the SPR is in online mode, a simple reboot has solved my problem.