Start the sequence of transmit API
I use the API to pass to get the timecode of the sequence it plays. I am using the respondent and work on the number of seconds between ticks.
This gets the number of seconds from the beginning, which is fine if the sequence starts at 00:00:00:00, but if it starts to 01:00:00:00 or some other value, then, all the timecode values are wrong. I couldn't find a way to get the sequence starting position - am I right assuming that there is no such a function?
Hi Jon,
This call is not yet available, but we had a demand for it, and track as bug #3218723.
See you soon,.
Zac
Tags: Premiere
Similar Questions
-
XP starts the sequence but stops at a black screen before the end of startup.
When I start my PC's of tracks through the boot sequence but evaporate hangs on a white, black screen. Then I plant sequence and re-boot into Safe Mode. I tried to restore to a previous point, but have always had the same problem. The company I bought the PC from was wound up some time ago and I don't have a recovery disk. I can only work in safe mode and cannot access the net, emails or anything other than the basics. Any ideas gratefully received.
Hello
As you can connect to the computer in safe mode, I suggest you perform a clean boot to verify if a third party startup application or service prevents the computer
to boot the system.Refer to this article for more information about how to perform a clean boot:
How do advanced clean boot troubleshooting in Windows XP:
http://support.Microsoft.com/kb/316434Also see this article:
Advanced Troubleshooting for General startup problems in Windows XP:
http://support.Microsoft.com/kb/308041Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello - the members of the Forum.
I have a problem about the execution of a TestStand sequence into LabVIEW. I created a VI that offers the possibility to choose a sequence TestStand-file and then executes the sequence using the TestStand API. The implementation is based on an example in C++-Application found the following link:
http://forums.NI.com/T5/NI-TestStand/unreleased-references-using-engine-API-in-C/m-p/2927314#M46034
The app works pretty solid where the VI is executed the first time. The VI treats the sequence chosen in an acceptable time.
But where execution is started again, the sequence takes approx. 30 sec more than in the first case.
So far I have not found a solution and hope someones got a clue about this problem...
I use 2013 LabVIEW and TestStand 2013.
I enclose my own VI, a sequence of the specimen with a small sample of VI, so you can reproduce the problem.
Kind regards
TobiKi
-
complete a report and start the following in a sequence
Hello world
because I did nothing in the model sequential and other models an options so far, I do not know how to start. Maybe you can help me with the following problem:
I have a lot teststeps in about 50 sequences. The problem is, that my report is too long to be displayed with the internet explore (I choose the ATML format). I spend most of the sequences manually and restart the test until I have tested everything. It's too much manual work.
Now, I want to automatically create a new report, for example 100 teststeps, or on another event.
A problem may be the style sheet, because the sequences are not finished when the report was created.
Another problem is how to tell teststand that he must finish the first report and start another.
Thanks for your response
Meike
Meike,
Another option, though less frequently used, would be to Pierce your sequence of subsequences and have some (or all) of these subsequences to run in the execution of a new one with the sequential process model. This will cause several smaller reports to generate. This approach is described in point 4 of this white paper: http://www.ni.com/white-paper/14394/en/
This approach seems like it might be what you are looking for. Let us know if you have other questions about this!
-
Read command line arguments to TestStand sequence start, moving within the sequence
Start a sequence by using a batch file and add command line arguments. Example: "MySequence.seq Arg1.
Now, within the sequence I want to read this first (and another) argument "Arg1".
There is a stage in the ActiveX for that, giving a type (object reference) channels, see screenshot.
Question: How to use this reference to read the argument?
Honestly I don't think that you are using it correctly. I think that your application in your UI Manager must handle this. However, to answer your question:
According to the TestStand help CommandLineArguments property is of type string. It comes to aid of TestStand as well:
Channels
A collection of strings. You can get a reference to the collection of the ApplicationMgr.CommandLineArguments property, the ExpressionEdit.GetValidEvaluationTypes and ExpressionEdit.SetValidEvaluationTypes methods and the ApplicationMgr.ProcessUserCommandLineArguments event.Properties
Count (read-only)
AgendaMethods
Add
Claire
Insert
DeleteLooks like you can use activeX not use Count or properties of the element to retrieve a single argument.
Hope this helps,
-
find if in the sequence editor API call
I swear that I found this somewhere once but can't find it now. What is the API call (or another mechanism) to determine if I am running out of sequence with respect to a user interface editor?
What I want to do is if running the sequence editor, make a call, but if running the user interface, make another.
Thank you.
RunState.IsEditor
Thank you
PH
-
Hi - I'm obviously new to yet, but that's what I want to do.
In a wedding video, I want them to be able to:
1 play the movie from start to finish.
2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.
So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?
Colin
You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.
Simple video:
Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."
Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.
Several videos:
Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.
Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.
-
Executes the sequence by programming
Hello
I see a problem by running the file in sequence by programming. I mentioned the example VI (C:\Users\Public\Documents\National Instruments\TestStand 2014 (32 bit) \Examples\TestStand API\Executing API\LabVIEW using sequences) comes with TS2014 which crosses the sequence context of sequence by invoking TSEngine so the entries to the VI are sequence context, movie file, the process template.
To facilitate my task, I modified the code attached to make autonomous running the sequence through TSEngine directly to entries in VI are movie file and the model of process.
It works fine when I run like VI, but does not work during the conversion into exe.
Please let me know if I'm something wrong or missed something
Thanks in advance
-Vivek
You should look into the creation of a user interface you want to execute your order by programming. The user interface can be hidden if it works the same as your code is planned. Start with the simple graphic interface "C:\Program Files (x 86) \National 2014\UserInterfaces\Simple\LabVIEW" so see how this can be done.
More precisely. a person does not open a reference to the engine. What is much more common is a person placing the Application Manager control, call the Start method. and then get the reference to the engine here. Be sure to stop the application subsequently and additional references nearby. I guess because you're in a development environment is the reason that your code works like a VI.
-
Run the sequence TestStand silently in c# with report
Hello
I use TestStand 2012 SP1 and Visual Studio 2010.
I want to run a TestStand sequence silently in my c# software.
I saw on this web site, how to run a TestStand sequence (https://decibel.ni.com/content/docs/DOC-29585).
This example is really interresting to know how make it work using the .NET interop API.
The problem that I can't solve is that no report is created during execution of the sequence, although I added a step to configure the ReportOptions.
Here, you will find the class that I use to start the TestStand sequence:
public execution StartSequence (string sequenceFilename, string resultDir, out SequenceFile seqFile)
{
Run exec = null;Try
{
The admin user = Engine.GetUser ("administrator");
Engine.CurrentUser = admin;SequenceFile seqFileModel = null;
StationOptions stationOptions = Engine.StationOptions;
stationOptions.DisableResults = false;
stationOptions.AllowOtherModels = true;int flags = 107; GetSeqFileOptions.GetSeqFile_OperatorInterfaceFlags;
seqFile = Engine.GetSequenceFileEx (sequenceFilename, flags, TypeConflictHandlerTypes.ConflictHandler_Prompt);bool modelExists;
String modelPath = seqFile.GetModelAbsolutePath (on modelExists);
seqFileModel = Engine.GetSequenceFileEx (modelPath, GetSeqFileOptions.GetSeqFile_NoOptions, TypeConflictHandlerTypes.ConflictHandler_Prompt);Configure the report options
int reportOptionCallbackIndex = seqFile.GetSequenceIndex (DefaultModelCallbacks.DefModCback_ReportOptions);
If (reportOptionCallbackIndex > - 1).
{
seqFile.DeleteSequence (reportOptionCallbackIndex);
}
Sequence reportGenCallback = seqFile.CreateCallbackOverrideSequence (DefaultModelCallbacks.DefModCback_ReportOptions, false);
InsertStatementStep (reportGenCallback,
'Parameters.ReportOptions.DisableReportGeneration=False,\n ' +.
'Parameters.ReportOptions.GeneratePath=False,\n ' +.
Required string. Format ("Parameters.ReportOptions.ReportFilePath=\" {0} \",\n', GenerateReportFilename (resultDir, sequenceFilename)) +.
'Parameters.ReportOptions.UseOnTheFlyReporting=True,\n ' +.
"Parameters.ReportOptions.PurgeOnTheFlyResults = True");exec = Engine.NewExecution (seqFile, "Single Pass", seqFileModel, false, 0, null, null, null);
exec. Report.Location = resultDir;
}
catch (Exception)
{
throw;
}return exec;
}What's wrong with my code and what should I do to obtain a report related to the only passes?
I hope someone will help me
Best regards
CFOE
Hello
This code works very well I just forgot to manage performance by querying messages.
Best regards
CFOE
-
How to call sequence into LabVIEW, by providing the path of the sequence files.
Hello
Please give me a solution for call sequence from the API ActiveX LabVIEW file by entering the path of the LabVIEW user interface sequence.
Thank you
Wherry
Here is a link I gave some pointers on how to run a file opened via Single Pass sequence.
How are you going to start this sequence is the user who selects the sequence on the disk? Is already open in a SequenceViewMgr control?
An operator interface would be more applicable to your situation?
Thank you
PH
-
How to start the new film w/o bundle?
Hello
I'm on a MacBook Pro. I noticed things may work more slowly Gets the biggest of my library. What I want to do, is to reduce what must read my ram.
I would like to start a new movie without a bundle. How is that done?
Other films allows this folder as a foundation without having to use everything in the folder as fcpx use as a library package?
For me, this is a big drawback for a fab app. Where you cannot choose what film project has in its database. I wish I could take stuff 'offline' when I want to and able to link again as needed.
Not to mention, because the sequences are called projects, it screws up to talk about the 'project' film, so there are a lot of ridiculous workarounds. Irritating.
The best
Elmer
I think most of the users work with external supports. You can change where the library stores the media in the library properties.
-
I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps
Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
create this connection, I must provide the user name and password provided by the ISP.I have to dial internet connection manually after the modem set automatically connect to the local network
I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.
The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:
Windows Control Panel > Internet Options > connections or
Internet Explorer Tools menu > Internet Options > connections"Dial whenever a network connection is not present"
-
In the last day or two (8 August 2012) each time I start Firefox (14.01.01) I get a pop up that says "Google has disabled using the maps API for this application. He directs me to Google Maps terms & Conditions, but does not provide a solution to disable the pop up. I tried to disable Google Maps as an Add on Firefox, but still not the context menu.
It is easy to fix the problem or is this an attempt by Google to force me to Chrome, much like trying to crush Netscape in favour of Microsoft's Internet Explorer?I thought about it. It is not the browser itself. It happened that I had two pages that open when I started the browser (at home and at work) and it was one of them who had a Google map. They have had to fix their Web site.
Sorry Google, to think that you were an evil Empire! -
How to let axSequenceView view the sequence file, after the opening before the race.
How to let axSequenceView view the sequence file, after the opening before the race.
I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.
You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.
-
How to create ProcessModel calculate TOTAL as follows to call the file in the sequence?
I made a custom operator Interface and I want to support a progress bar for giving the user indicates to what extent this time they represent. I already have the infrastructure of reminder Setup so that the progress bar will be updated based on a Message from the user of the motor.
In the process template itself, I put in place a "ProcessModelPostStep" (the purple one) reminder so that after all the steps of the calling sequence file I increment an internal counter and send these data as well as the Message of the user.
The only missing part is to know how to calculate the TOTAL number of steps in the sequence file calling. I can get the total number of SEQUENCES defined in the calling file but I how to recursively on each sequence loop excluded from top down by counting all the steps of the sequence of the callee.
Appreciate any help in getting this last piece in place.
Thank you!
I have a better solution in the images below. The code snippet is the code called by TestStand to introduce recursion.
The attached code is the recursive call. It is similar to my first post, but the fixed a bug with the cast of references.
This should get the total number of step. The code works under some assumptions:
1. all called sequences are in the same file in sequence. (You can add steps to also get the path to the movie file and retrieves the sequence from there.)
2. There is no asynchronous LabVIEW step in TestStand. (These are treated as sequence calls into the API, and you must add code to sort.)
Maybe you are looking for
-
Each time Firefox auto-updated runs Norton360 detects a virus in the file update xul.dll (virus is identified as: Suspicious.Cloud.9.B a heuristic virus) and removes the file "Mozilla firefox/getting updated. When Firefox tries to restart it inevitab
-
I have a virus on my Macbook help!
I am almost certain that my Macbook Pro has a virus! Whenever I am on a site (a site Web, anyone) my mouse icon will blink then the site will open in a different tab and the original tab turns into an ad! It has been going for probably two weeks now
-
On the extension of the warranty period.
I want to extend my warranty period, for this what is the procedure? Where I have to go? Means to extend the warranty period, I had to go to the store with my laptop, or it is possible via an internet connection? Good answer... Thank you...
-
cartridges for photosmart 5520
I use hp 364XL in this printer - all four colors, please?
-
The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys: (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF