Start time for the Timeline timecode

Similar Questions

• Why GMT shows it in the start times for the sport

  On my dashboard startup time game used as PDT or PST. Now it shows GMT. I know that the Pacific time is 3 hours earlier than the time of my region. What difference is there in GMT and the Eastern time and why the change?

  Hello, please contact the Web site where you experience this problem - it is not something that is controlled by your browser.

  to convert GMT to your location, see www.wolframalpha.com/input/?i=current+time+in+timezone+GMT

• choose Start and end in time for the ashes report

  I'm using Oracle 11.2.0.3.
  
  I have sql_id for an update statement, which took almost 4 hours. It took place from 18/04/2013 19:20 to 18/04/2013 22:30 approximately.
  
  I'm under ashes using @$ORACLE_HOME/rdbms/admin/ashrpt.sql report
  
  What should I use to start time and the end time?
  should start on time be exactly when the query started / or before the beginning of the request, or after request started?
  
  If I want to search awr report should I take the snapshot taken at 7 and 11?
  
  Also, is there other reports or query that I should check to diagnose long-running sql?
  
  Thank you.

  spur230 wrote:
  ... Etc...
  What should I use to start time and the end time?
  should start on time be exactly when the query started / or before the beginning of the request, or after request started?

  If I want to search awr report should I take the snapshot taken at 7 and 11?

  Also, is there other reports or query that I should check to diagnose long-running sql?

  (1) If you have pictures of an hour, watch 7-> 11 range o.
  (2) get the SQL_ID of the query which poses problem and use the Advisor of Tunnig SQL (DBMS_SQLTUNE) to identify and resolve the performance problem.
  (3) also, you must consider the plan of the explanation of problematic queries.
  : p

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.

• Creating a rule entry time custom to read the start time and the stop as entry time

  Hello world
  
  I hope this is the right forum to post this question.
  We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
  
  The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
  So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
  
  However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
  
  This expansion in a scenario:
  
  1. the employee connects via the Self Service and access the timesheet feature to make a time entry
  2. on August 20, he entered 13:00 as the start time and stop time 20:00
  3. click on the button
  
  When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
  
  ----------------
  Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
  This is where I run on issues that I don't know how to get these start and stop within the formula time
  
  Grateful if someone could help with this.
  It's quite urgent given the lead times for completion on that.
  
  Thks in advance folks
  Ravi

  l_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
  l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;

  However, I do not understand this:
  If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.

  Pls advise me on this point, because I'm just not understand this bit.

  You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id

  If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?

  The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.

• When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  

  Which turns off.

• The waiting time for the activation of the subscription of creative cloud?

  The waiting time for the activation of the subscription of creative cloud?

  Hi Evgeny,

  You can follow the article: solve common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages and errors in connection with Creative Suite and creative Cloud applications, activation and connection Solutions to resolve activation problems.

  Let us know if this solves the problem for you or not.

  Thank you

  Yann Arora

• Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?

  Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?

  HI Lucas,.

  I see that you have tried to change the billing details, but they were not properly updated.

  Please get in touch with the customer: -.

  Contact the customer service

• Elapsed time for the materialized view vs Master table query

  Hello all;
  
  Small confusion about time up for the vs Master materialized view table query
  
  

  SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:30.54
  

  SQL > create materialized view mv1
  2 activate the rewrite of the query as
  3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  Materialized view created.
  Elapsed time: 00:00:01.45
  

  SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:00.01
  
  Please see the three cases "Elapsed Time"...
  
  When comparing other cases.
  1. my query takes long time (30.54), extraction of data from the sale
  2. create a materialized view takes less time (01:45) why?
  
  Source: http://uhesse.com/2009/07/08/brief-introduction-into-materialized-views/

  >
  Small confusion about elapsed time for the materialized view vs Master table query

  SQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:30.54

  SQL > create materialized view mv1
  2 activate the rewrite of the query as
  3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;
  Materialized view created.
  Elapsed time: 00:00:01.45

  SQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:00.01

  Please see the three cases "Elapsed Time"...

  When comparing other cases.
  1. my query takes long time (30.54), extraction of data from the sale
  2. create a materialized view takes less time (01:45) why?
  >
  Many queries take less time the second time you run them. After the first performance, there may be many, if not all, lines in the buffer cache. Then the second round will not make any or all e/s physical but will obtain data from the buffer cache.

  Also, you haven't checked that the MV was even used for the second run.

  Drop the MV and make the query several times and means of the time. Then create the MV and do the same thing.

• Quick Start Guide for the development of AIR on iOS?

  Hello

  Is there as a starter guide for the development of AIR for iOS? I am looking for a sort of tutorial that tells me what to install and how to create a Hello World game on iOS (iPhone and iPad).

  Thank you

  http://active.tutsplus.com/tutorials/mobile/Flash-for-iPhone/

• What are dsiplayed units of time in the timeline?

  It's maybe a stupid question, but I wanted both to an event that I recorded with my sony hd camera.  I imported the clip pe 9 and tried to judge time to watch frame-by-frame in the timeline.   the units appear like this 01:30; 25 but the last two digits go from 25 to 00.   that the devil which means?   are these frame units, the second, a novel timing invented by adobe system?    I realize a video camera is not an instrument of measurement of the time, so maybe I'm too ask a lot... but now I'm curious... What are these units displayed in the timeline panel, and why they jump in increments that they do?   the value of my sony camera?  or adobe?

  Thank you...

  David

  N ° is the General standard in Non-linear video editing. Adobe continues just to follow. Which means the timecode in your case is 01:00 seconds: 25 images. If she spends 25 to 0, it means that you have created a PAL project. For NTSC, it climbs from 30 to 0. This indicates not only the time, it also indicates the number of images. And it's really too granular you need to get into this big bad video world.

  You can use this to make your time. I'm guessing that you don't need a precision less than 0.04 seconds (25 images per second - an image in 0.04 seconds).

• Can not change the units of time in the timeline display, how is it?

  Hello

  I have a project with several chronologies and many clips (which are all conversions for 8mm film).

  The clips are all ProRes to 23.976 fps/720 p or 1080 p/29,94 fps (two different places did the conversions for me and each have their own workflow)

  I did separate timelines 23.976 fps/720 p and 1080 p/29,94 fps and did my best to keep the separate formats.

  In my 720 p/24 fps timeline (that I created by dragging an item to the icon of 'New element') if I right click on the time in the upper left corner of the timeline of the sequence I can choose between:

  24 fps timecode

  No offset 30 fps timecode

  Feet & frames 16mm

  Feet & frames 35mm

  Frames

  My only option is 'Frames' (be it by right clicking on the time or through the sequence settings) within my 1080 p/29,94 fps timeline

  Anyone have idea what I am doing wrong?  It's just much easier for my brain to work with time...

  Thanks for all the tips!

  -Mike

  Here is a screenshot

  

  Just make a new sequence with the correct settings.

  Copy old sequence of new sequence footage.

• Adding clip at a specific time on the timeline

  This seems to be a very simple task, but I'm pulling my hair out trying to understand this.

  When you put the clips in the timeline, imovie, they automatically move at the end of the previous element, all the way to the left of the timeline. Is it possible that you can move a clip at a specific point in the timeline, say, 01:30, but a gap of no content between 0 and 01:30? I have an audio track at the moment and I try to sync the audio clips, but I take pieces out one at a time and don't want any film from start to finish crafts. There MUST be a way to put videos where I want, at the top of the audio without having to move and attach it to the previous item. I want to just place them where I want to, at some point, and they have to stay there.

  I updated my software and iMovie version (I'm on a macbook pro).

  No, you can only leave spaces between clips in the main FCP timeline.  However if you put a (probably black) background in the iMovie timeline and extend to the duration of the video, then you can put top clips whenever you like and it will display when you play the movie (picture in picture).

  Geoff.

• What will be the best time for the update of the window?

  Does anyone have a directive on execution of the Update window?

  Someone has suggestions on when to do and how to do?

  Thanks in advance for your suggestions

  After you install installers, it will jump to the top message to reboot XP? or it will restart XP automatically?

  Thanks a lot everyone for all the suggestions

  Get WU to work for you, by choosing an option that works for you, for example you can be notified only and then you can choose to download and install, and reboot when it's convenient for you: -.

  Windows XP

  To activate the automatic updates yourself, follow these steps:

  1. Click Start, click run, type sysdm.cpl, and then press ENTER.
  2. Click the automatic updates tab, and then click to select one of the following options. We recommend that you select the automatic (recommended) automatically download updates that are recommended for my computer and install them .
     • Automatic (recommended) automatically download updates that are recommended for my computer and install them

       If you select this option, Windows recognizes when you are online and uses your Internet connection to find updates on the Windows Update Web site or on the Microsoft Update Web site that apply to your computer. Updates are automatically downloaded in the background, and you are not notified or interrupted during this process. An icon appears in the notification area of your taskbar when the updates are downloaded. You can point to the icon to display the status of the download. When the download is complete, you receive another message in the notification area so that you can review the updates are planned for installation.

       • Click to select the day and time for scheduled updates to download and install. You can schedule automatic updates for any time of the day. However, your computer must be on at the scheduled updates to install.
       • You can choose to install the updates as soon as they have finished downloading. To do this, click Download message (or the Update icon), and then click install. If you choose not to install updates when they finish downloading, Windows starts the installation on your set schedule.
     • Download updates for me, but let me choose when to install them

       If you select this option, Windows recognizes when you are online and uses your Internet connection to automatically download updates on the Windows Update Web site or the Microsoft Update Web site. An icon appears in the notification area of your taskbar when the updates are downloaded. You can point to the icon to display the status of the download. When the download is complete, you receive another message in the notification area so that you can review the updates are planned for installation.

       • When you want to install the downloaded update, click the message (or the Update icon), and then click install to install the update.
       • If you do not want to install a downloaded update, click Details, and then click to clear the check box next to that update to decline.
     • Notify me but don't automatically download or install

       If you select this option, Windows recognizes when you are online and uses your Internet connection to search for downloads from the Windows Update Web site or from the Microsoft Update Web site. An automatic updates icon and message appear in the notification area of your taskbar when new updates are available to download or install.

  • Click the icon or message to view the updates. If you do not want to download a selected update, click to disable the check box next to that update to decline. Click Start Download to download the selected updates. The automatic updates icon remains in the notification area of your taskbar, while updates are downloaded. You can point to the icon to display the status of the download.
  • When the download is complete, you receive another message in the notification area indicating that the updates are ready to install. Click the automatic updates icon or the message, and then click install to install the updates.
• Click OK.

• Download times for the table statistics

  Is there a query I can run that will be how much time it took for the stats to collect on any given table during a task to gather stats from database?

  If it was a full rally I could do something like take time away from the previous table, but this cannot be invoked in an additional bland as the previous table would have not been vitiated, I guess I could work on what table available to it, but it starts to get messy then.  Hope in a way would we apply more if anyone knows.

  See DBA_OPTSTAT_OPERATIONS

  But it doesn't have the granularity that you need, if you haven't just gather_database_stats