Start time of an exe

Similar Questions

• Acrobat XI fails to start-> failed application Acrobat.exe Faulting Module: amtlib.dll

  I get the below error whenever I try to start Acrobat Standard XI on the customer's PC.

  I tried to do a clean install (using the acrobat cleaning tool and cleaning of all traces of adobe products) and I still get this error. The EULA is displayed the first time I try to load Acrobat after that a new installation and I accept it then this error occurs immediately.

  I have also tried installing Adobe Application Manager, update both 11.0.6 and 11.0.7 delete cache.db, System Restore and every other difficulty that I found via Adobe communities.

  After a while, I get an error that appears "Acrobat could not connect to a DDE server.

  Firewall and antivirus are disabled when this error occurs.

  I could install and use Acrobat Pro XI without problem successfully.

  Customer is impatient and I am out of options. I couldn't find a number of support for assistance.

  The failing application name: Acrobat.exe, version: 11.0.7.79, time stamp: 0x536b812b

  Name of the failed module: amtlib.dll, version: 6.2.0.46, time stamp: 0x528478ca

  Exception code: 0xc0000417

  Offset: 0x0013d1e9

  ID of the process failed: 0x11b4

  Start time of application vulnerabilities: 0x01cfb76e5193cef1

  The failing application path: C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Acrobat.exe

  Path of the failing module: C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\amtlib.dll

  Report ID: 9086cc3f-2361-11e4-a448-f8bc127dc970

  Solved the problem on my end!

  Go to c:\ProgramData\Adobe\SLStore

  Set your settings to show the hidden files and folders. If you see one. LIC files in there, rename them (before deleting).

  Then again Adobe and see if it works!

  If it works, then return to this folder and you should see a newly created. LIC file. Remove the old files and you should be good!

  So happy that I had to figure this on my own, lost 2 days of work on Adobe. This question is certainly due to the problem with their problem of Acrobat Standard Server license yesterday, I'm positive of it.

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• How to set the start time of QuickTime movie in AppleScript?

  I've been tasked with finding a way to play videos to QuickTime in full screen at a specific time.

  It seems that I have to use AppleScript, which I've never used it before.  I wrote this, that does everything, but from the beginning of time says:

  Tell application "QuickTime Player"

  Open the file "Macintosh Users:...: video56.mp4.

  present the document before

  play

  tell the end

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  Thanks in advance for any help!

  El Capitan 10.11.3 OSX

  21.5 "iMac late 2009

  QT worm 10.4 (855)

  Hello

  The script must set the current time property of the document, like this

  ------------

  Tell application "QuickTime Player"

  set tDoc to open the file "Macintosh Users:...: video56.mp4.

  tDoc said

  at the time current 36 - the start time of the movie (in seconds).

  present

  play

  tell the end

  tell the end

  -----------

  Shortman43 wrote:

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  The v designates a file object.

  And the n is a document object.

  Examples:

  read the document 1

  document before playing

  read the document 2

  play tDoc - the tDoc variable contains a document object

  or with a block of tell

  tDoc said

  play

  tell the end

  tell document before

  play

  tell the end

• start time of 4 + hours

  Someone knows how to fix a start time of 4 + hours with the following newspapers?

  System.log:

  20 jan 17:40:38 restart [9115]: SHUTDOWN_TIME: 1453340438 303534

  20 jan 17:45:27 localhost bootlog [0]: BOOT_TIME 1453340727 0

  20 January 22:07:49 localhost syslogd [50]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  accountpolicy.log:

  Jan 20 17:31:14 (86.556.1) AuthenticationAllowed completed: file '', result: success (0).

  20 January 22:13:27 agent political support account from

  There is literally nothing else in newspapers during the same period.

  iMac 27 inch El Capitan 10.11.3 running 16 GB on memory.

  I really do not have to do a complete cleaning and reinstall.  I have already checked the permissions of drive, reinstalled OSX without wiping the drive and so far nothing works. In the past, it was 2-3 hours of starting time, but 4 + hours is too much.

  You USED to have 2-3 HOURS of waiting for Mac to start?

  Of course it looks like a hard drive failing for me.

  What happen when Mac boots and is running?

• by the numbers, how can I convert a start time and end in hours time

  I convert my files to Excel, and no to not translate my formulas.

  I have a start time, end time, and hours, what formula should I use to have hours to calculate?

  Thanks for any help

  by the numbers, you can perform mathematical operations on time like this... assuming they are valid values for date/time...

  Assuming that one time is in cell A1 and the other is in A2, you can get the difference like this:

  = dur2hours(a1-a2)

• Incompatibility of RS232 & Personal DAQ Start Time

  I'm looking to collect data from two separate serial ports and a personal data acquisition (analog input) at the same time.  everything seems to work fine until I try to display information on a list.  I get an error indicating that the start times are incompatible.  I'm not sure how to match the time of departure for these three modules.  serial ports seem to start at the same time, but the acquisition of data trolling in about a second or two.  running with Dasylab 11

  The pilot of x 5 PersonalDAQ play well with others.

  Define full Adapt for linear Interpolation and the serial number for "a row of data" (or whatever the second choice is called in your version).

  The first entry of the Adapt is the channel FASTER, that should be the PersonalDAQ, unless you have collection at a very slow sample rate.

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.

• Problem editing start time of recurring events

  Hello

  I'm working on an application to synchronize our planning with the BlackBerry calendar software.  I have most of the synchronization works in two ways, however when my BlackBerry application tries to update the recurring events monthly and annual departures with changes downloaded directly from my external server application, the start time does not change after that I am committed to the event.  The end time will change and not recurring, weekly and daily event start times change, but not every month or every year.  I use the same code to update all the:

  ...

  Enumeration foundEvents = eventList.items (eventID);

  If (foundEvents.hasMoreElements ())

  event = (BlackBerryEvent) foundEvents.nextElement ();

  on the other

  event = (BlackBerryEvent) eventList.createEvent ();

  Start long = inStream.readLong ();

  If (event.countValues (BlackBerryEvent.START) > 0)

  event.setDate (BlackBerryEvent.START, 0, Event.ATTR_NONE, startup);

  on the other

  event.addDate (BlackBerryEvent.START, Event.ATTR_NONE, start);

  long end = inStream.readLong ();

  If (event.countValues (BlackBerryEvent.END) > 0)

  event.setDate (BlackBerryEvent.END, 0, Event.ATTR_NONE, end);

  on the other

  event.addDate (BlackBerryEvent.END, Event.ATTR_NONE, end);

  ...

  I have only this linked with the Simulator to date, but all versions of the JDE I tried (4.5, 4.6, 4.6.1, & 4.7) have the same question.  Is this a bug in the Simulator, which is something I am missing or update order problem?

  Thank you!

  I was able to replicate this as well and made it to our development team.  Please create a topic in Issue Tracker and post the number here if you want to follow the progress of this fix.

  https://www.BlackBerry.com/JIRA/secure/dashboard.jspa

• BlackBerry Smartphones calendar appointment start times

  This is the first time I use the BlackBerry forum in the hope that someone can solve a problem I have.  I am a user of storm and have not been able to find a way to get new appointments in the calendar set up for the actual start time, rather than the 15-minute interval that seems to be the only option.

  Does anyone know if it is possible on the 9530 Storm to set up meetings with an actual start time instead of just a quarter of an hour the closest?  Have not been able to find this solution everywhere.  Thank you.

  Hi and welcome to the Forums!

  You can override the increments... instead click on the top and down arrows, just enter the numbers you want (you may have to show the keyboard if it is not already displayed).

• Could not start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit

  Hi all

  I was able to start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit

  error starting turning

  "This application has failed to start because its side by side configuration is incorrect. "

  " Please see the application event log or use the command-line sxstrace.exe for details."

  Picture AFP for reference "ContentServerExplorer_error.png".

  Where as on my system still Sites runs correctly.

  Kind regards

  Anoop.

  I had not myself but a quick search suggests this may occur if VC ++ and Visual Studio is installed also, causing the SitesExplorer to load one different version of the C++ runtime other than that it provides. Event log Windows could give more details.

  Please see

  http://www.chiefarchitect.com/support/article/KB-01046/

  and

  http://support.Microsoft.com/kb/2525435

  for suggestions how to solve.

  Phil

• Sort by start time of file in multitrack - hearing CC

  Hi guys,.

  I was wondering if its possible to sort by start time of file in the files window, as is the case in the markers window.

  I often long session files with same named files distributed on the whole, and it would be valuable to see where a particular file is located in the estate, within the session.

  I can't think of another way to organize in a way that makes sense for my needs.

  See you soon

  Brad

  It is not an option to sort by start time of file. However there are options to sort by current order or access order. You may need to extend your files window to view additional columns. If you do not see them turn them on by right clicking on the column title field to display the menu drop down. The column order can be changed by clicking left on the field, and then drag it to a new location. Hope that helps.

• Start time of SGD

  Hello

  I wonder if there is a way, either on the server WHO, or repository backend database to know the last time that the WHO has started. When I use the emctl status details who it does not give the timestamp at which the current WHO began. But when you do it for an agent (agent status emctl) you get these information for the start of agent time.

  Status of WHO:

  >. / emctl status who-details

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  Enter the password to Root of Enterprise Manager (SYSMAN):

  Console server host: omsserver.mycompany.com

  Console HTTP port: 7778

  Console HTTPS port: 4444

  Download HTTP port: 4889

  Download HTTPS port: 1159

  Instance of EM homepage: / u01/app/oracle/product/MiddleWare/gc_inst/em/EMGC_OMS1

  Location of the journal WHO directory: / u01/app/oracle/product/MiddleWare/gc_inst/em/EMGC_OMS1/sysman/log

  SGC is not configured with the PES or virtual host name

  Download of the agent is unlocked.

  SGD console is unlocked.

  CA active ID: 1

  Console URL: https://omsserver.mycompany.com:4444 / em

  Download URL: https://omsserver.mycompany.com:1159/empbs/upload

  WLS domain information

  Domain name: GCDomain

  The host server administrator: omsserver.mycompany.com

  State of the agent:

  >. / emctl status agent

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  ---------------------------------------------------------------

  Agent version: 12.1.0.2.0

  Version of the WHO: 12.1.0.2.0

  Protocol version: 12.1.0.1.0

  Home Agent: / u01/app/oracle/product/agent12c/agent_inst

  File binary agent: /u01/app/oracle/product/agent12c/core/12.1.0.2.0

  Agent process ID: 11230

  Parent process ID: 11013

  Agent URL: https://agentserver.mycompany.com:1831/emd/hand /

  Repository URL: https://hlcnwoemp01.mycompany.com:1159/empbs/upload

  Starts at: 2013-08-31 12:45:55 < = Start time

  Started by user: oracle

  Last charging: (none)

  Last download successful: 2013-11-25 15:08:10

  Last attempt to download: 2013-11-25 15:08:10

  Total megabytes of XML files uploaded so far: 552.38

  Number of XML, waiting for loading files: 0

  Size of the XML files in the upload wait (MB): 0

  Available disk space on the file upload system: 47.17%

  Collection status: activated Collections

  Pulse Status: Ok

  Last heartbeat to WHO attempt: 2013-11-25 15:07:46

  Last pulse in SGD: 2013-11-25 15:07:46

  Then, at the request of the heart rate to WHO: 2013-11-25 15:08:46

  ---------------------------------------------------------------

  Agent is running and ready

  Thank you!

  Console > Setup > manage Cloud control > Management Services

  In the table, click the name of the management service

  Service of management of Oracle (drop down menu) > surveillance > status history

  General section obtained information since when WHO is in place