starting cold on hp Pavilion a1737c (resolved)

Similar Questions

• HP Pavilion a1220n starts cold start, but gets the error message to "restart".

  Restart in function, the error message: "reboot and select proper boot service or insert boot media in selected boot device and press a key.

  One way to start is to power down then upward.  Windows will load.  What is the problem with the hot start?

  Running WIN 7 Home Premium 64-bit.

  Any suggestion is appreciated.

  Hello

  Disconnect all USB devices except the keyboard and mouse.  Don't forget that the CD drive is empty.

  Try to clear the CMOS memory.

  Looks like your PC is trying to boot from LAN.  If this is the case then to clear the CMOS will change all the parameters of the bios to the default values.

• start using SD in Pavilion dv2000 memory card

  Hello

  I wanted to boot from SD memory card in my HP Pavilion dv2000 laptop. What should be the BIOS for this setting.

  Thank you!

  Shivchal

  I don't think that you can start from your reador of card for laptop

  but you can start from your SD card using a USB card reader

  But u should create this card as bootable,

  There are many free application on the internet, just google,

  and make your bootable SD card, then use it.

  I used "USB_MultiBoot_10" and I create a portable bootable computer cos XP instalation disk of my father, dvd does not work.

  I do not have the link at the moment. but I got frm google search.

  Have FUN BRO,

• HP recovery disks does not start in my HP Pavilion Dv7

  I have a HP Pavilion dv7 that I have to wipe clean due to spyware. I bought the HP system recovery DVD and on them it says "to start, insert the disc into the optical drive of your computer and follow the on-screen instructions." Unfortunately, I insert the disc, and I get the info from the upcoming disc, but no instructions. I even tried to make the laptop run from the disk drive at first upward. When I did he asked me to create system recovery discs. I didn't need to make them, I have them from HP. Just frustrated about why the HP drive are not following the instructions.

  Here is a picture of the screen I get when the disc is inserted:

  

  I really hope that someone can help me that I've been waiting to do this for weeks, since I had to wait for discs.

  Thank you

  KC

  You are the very welcome, KC.

  If you can not boot from the DVD, it may indeed be a bad disk.

  Also, make sure that you have disk 1 in the first to start from.

  And Yes, you should get a very brief message to hit any key to boot from the CD, then watch carefully for it.

  If you miss it must start over and restart the PC.

  Paul

• Unable to start cold the Windows XP computer

  Original title: computer starts not cold.
  Cold, after that turn off for a while, the computer doen't start when turned on, have to light several times so he can start the boot process. Fan comes on, but it doesn't progress thruogh the start-up. Once it starts to initialize it continues through the correct process.  Once executed, if you do a restart it restarts fine.

  Gave place to the computer had gotten too old, 8 years actually, so got a new.  Thanks for the comments.

  Thank you.

  I tried updating the BIOS and it helped for a while.  Also tried a new hard drive.  Finally, it got worse to the point of period won't start do not.  He was 8 years old, trying to get a down more time out of it, but gave rise to a new computer, what is optimal. He had had it's time, I guess.

• Press power twice to start cold

  Hello everyone

  I hope that it is the jury for that matter.

  I have a DESIRE of HP TouchSmart m6-k025dx Sleekbook (ENERGY STAR)

  A cold state (computer absent for an hour then more). I need to press the power button / stop twice, Frist press the power button lights and wireless lights and the display activate with a light, then dark without lights and power button Press new black screen and boots normally and very well no error or warning

  This does not seem normal, and I don't remember the last time he started from the first press of power button.

  Hello

  Try this document: reduce the heat inside the PC to prevent overheat. Event if it can not be overheating (and yes it can heat many a boot cold, I currently have this problem with my office just to cheap to repair). But the document will guide you through the 'cleansing' of the Interior, specifically the fan and vents.

  Also, I would recommend swapping the ram. Try again with a single, switch and change the slots upwards. The maintenance and Service guide can help you with this if necessary.

  I would like to know how this happens.

• "Boot Device not available" when starting cold laptop Dell Inspiron 8200 with Win XP.

  "Boot Device not available" when you power on a Dell Inspiron 8200 with Windows XP.  Repeated restart attempts after Windows starts.  Once in Windows, I can restart repeatly with no problems.  The "Boot Device not available" only occurs during a cold start the PC.  Any help is appreciated.

  Malkeleah,

  Thank you!  Unfortunately, the laptop is 8 years old and is no longer under warranty.  With your guidance, I'm going to explore repair or replace options.  Best wishes to you...  Taylor

• Custom color calibration lost with UAC, lock, sleep, start cold

  I own a Spyder2Pro color correction device.  I used the camera for years on several systems.  I have a desktop 64-bit Win7 Ultimate that I used the calibrator on without any problem.  When I calibrate my Dell Latitiude E5410 colour becomes bluish and nasty with the accurate hot color display, I need.  Any time UAC appears my color correction back to the nasty original (very noticeable difference).  Any time I lock the computer and back he did the same thing.  I get the result even if it goes to sleep or I do a cold start.  I contacted color data and they have no problems reported with windows 7 on the device.  Thoughts?  Is dell puts some kind of color management in the laptop that replaces the windows control?  Thinking I could do a clean install this weekend to give a test drive.

  Hi Rick Mead,

  Try the methods below:

  Method 1:

  Start your computer in a clean boot and check if the problem still persists. Link below will help you to start the computer in clean boot: http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  Method 2:

  Check the color management setting, you can check the link below: management of color settings: frequently asked questions:http://windows.microsoft.com/en-IN/windows-vista/Color-management-settings-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unstable AE after rendering, have to start cold computer because the system becomes unstable. Help please!

  Hello world.

  I have a laptop Intel i7 Toshiba Qosmio with 12 GB of RAM, a 3 GB Nvidia graphics card.  Two 750 GB HARD drives.  Windows 7 64 bit Home Premium edition.

  I had to convert a video (in AE) of my camcorder Sony QuickTime then moka he could follow.  The file size was 12 GB.  I motion tracking with Mocha video 3000 frames have been followed.  I have completed my project and when I go to make it takes about 15 or more minutes to return, but after the rendering of the entire system is completely unstable and requires a cold start.  It makes the video fine, but the computer is unstable.

  I was looking at the use of the RAM then that rendered and he used only about 15% of the 9 GB allocated for AE.

  AE CS6 version 11.0.4

  Can someone help me with this?  I uninstalled AE and reinstalled and there are always the same.  I have a small project, no less important than a case and it preformed fine. No problems.

  Is the size of the files of great for AE?  Could the movement followed with Mocha be a factor in the stability of EI?

  No idea which continues, please help me.

  Thank you.

  I think I solved it.  I created the new exact replica of my project that makes the computer unstable.  I made it another 2 times, it takes 3 minutes and the computer is 100% stable.

  So I think that the old project was corrupt or something because the new double that works perfectly.

  So I call it answered.  Thanks for all help, much appreciated.

  Ron

• How to disable the start safe in HP Pavilion 23?

  I think this device has win8 when powered on it's evidence of "error: no boot disk was detected or the drive failed.

  I entered the boot order trying to boot from a linux disk, as shown in the first photo

  http://i493.Photobucket.com/albums/rr298/mikehende/20141029_154511_zps66320613.jpg

  the default value is set to UEFI, I move the arrow down to 'Legacy Boot Sources' as in Picture 2 below, but when I hit ENTER nothing happens?

  http://i493.Photobucket.com/albums/rr298/mikehende/20141029_154529_zps7319f8e6.jpg

  but according to this here; http://support.fixmestick.com/HC/en-us/articles/201577043-how-to-get-to-your-boot-menu-or-your-BIOS-...

  It's show elect start media in the F10 menu then

  BIOS 'Advanced' tab order, Boot, Move "USB Device" before 'hard drive '. Media non-UEFI, disable secure boot and enable legacy support. Looking at this picture I am trying to select Sources to perform F5 legacy boot but it shows:

  You must disable Secure Boot...

  I'm not understand how/where to disable secure boot, please help?

  YES, it works, thank you very much!

• What programs do you need to run it when starting a desktop HP Pavilion Windows Vista-based computer?

  I have several programs running on my start up and am not sure that is necessary and which are not.  I got a slow computer and the performance isn't there as if it was once.  I have recently removed spyware from my computer and wonder if some of these programs may also be the same.  When you run the start up programs are:
  Persistence Module, igfx hkcmd Module, (default), hpwsSchd Application, Kbd Stub & hpsysdrv Module of the drawer.  If you have any suggestions or know of these programs that can affect the performance of my office please answer this and give me your feedback.  Thanks in advance

  You need very little running at startup for any computer and what * you * must will be different from what someone else * needs *.

  Go through the list of things that you have running at the start of the system/user log in using "AutoRuns" and then configure (or remove if you wish) applications you don't want start up accordingly using their own settings (preferable) or seeing their request to start location (registry (, startup folder, etc.) and remove it (last resort) or - if you don't need the app start / all - to remove it through programs and features.

  Since you mentioned the spyware...

  Download, install, update and perform complete system analysis with:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  These two things will help, somewhat, by ensuring that you don't have anything left behind actively running (or in some cases, sitting idle waiting to be triggered.)

• Often, when I let my computer go "standby mode" I will return and the mouse pointer disappeared. I have to start cold to get it back. Any ideas?

  Happening all the time, just enough to make it boring. The computer is only a little over a year old so I think that some of the software is corrupted. Of course, I don't know much about computers, but I don't know that I don't want to shell out money for a fixable problem. Thank you to each and every one.

  Hi Denny,

  Thanks for posting your question in the Microsoft Community.

  I understand that your mouse pointer is missing after the return of the mode 'sleep'. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . What is the brand and model of the computer and the mouse?

  Please follow the steps and check the question below:

  a. open the Device Manager, expand Devices of Interface.

  b. right-click on the USB input device, click Properties.

  c. click the power management tab, select the allow this device to wake the computer, click on OK.

  For reference:

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• HP Pavilion HPE h9 - 1120-t Phoenix - PC suddenly starts turning Off after a few Minutes of use

  Posted this on the Forum for questions of another office before I reduced the problem.  No one answered:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/HP-Pavilion-HPE-H9-1120t-Phoenix-PC-suddenly...

  Announcing this computer from July 2012 and not even a hiccup.  4 days, the computer suddenly began turn power off. It doesn't stop, it turns off, the plug was pulled. When I reboot I get the message of abnormal termination of Windows.   There is no warning at all.  No message as the computer is overheating.  He comes to occur when the computer is idle without programs will open.

  When it stops, the power supply unit light goes out for a minute then comes back on the 'green' and the computer can be restarted.

  I unplugged the power cord and relugged and it seems fine.

  The computer is aware of the updates of Windows and can be stopped normally.

  I removed the cover and clean the dust and confirmed all fans are running properly.  I left the lid off the coast, and the computer stops again.

  I must add that when the computer is started 'cold' it runs about 15 minutes.  If you restart after it just closed, you have maybe 3-5 minutes of use.

  Why did you think it was overheating.

  Any ideas?  Thank you.

  Specifications of the computer:

  What thermal paste on the processor?

  There are two programs, you could download to monitor the temperature of the CPU

  Speccy free:

  http://www.Piriform.com/Speccy

  or Core Temp

  http://www.alcpu.com/CoreTemp/

  Another possibility is a PSU fault

  http://ryansccs.HubPages.com/hub/how-to-tell-when-computer-power-supply-is-failing

• "Can not detect 2 HDD on the system" error starting hp Pavilion G7 11002sa

  I am not able to start my laptop g7 pavilion and when I press F11 to recover from HP recovery is not allowing me to and tells me that it cannot detect hard drives on my system.

  I didn't something different on my laptop, but the last time, he displayed an error message before you start telling me there is a problem with my hard drive...  I ignored it because it still worked...

  I did not the recovery discs (thought they came in the box with Notepad) and now it doesn't let me do because it cannot detect hard drives.  Can someone help me please?

  This HARD drive went wrong if the test will not end. Replace the HARD drive, that's what needs to be done.

• Satellite Pro L10 not cold start

  I have a Pro Satllite L10. When it is completely shut down, the system does not always start. If it is tostand by, then it seems restert without a problem, but starting cold is something blindly. It seems that it will often start if you press the power button once, then leave the unit for a few minutes and then try again, but which could be lucky and have no real meaning.

  I downloaded the recent bios updates but this has not at all affected

  Hello

  Is it happens when the laptop works only with the battery or is connected to the adapter?

  It is really hard to say what might be wrong or why it's happening.
  I can only speculate on the dysfunction that maybe there is a problem with the electronic power supply on the motherboard.