Starting USB/change SATA mode. Spectrum of HP Touchsmart XT

Similar Questions

• Change the SATA mode in Windows 8

  I'm moving to sata IDE to RAID mode in Windows 8 in order to avoid the re-formatting my hard drive. The solution in Win7 (update registry KEY in regedit does not work). Any advice?

  With all due respect, Srivinvasa Sharath, your answer is very useful.  The question is not ' how can I change the SATA mode in my BIOS?  But, on the contrary, assuming I already know how to change the SATA in my BIOS mode, how Win8 to accept this change and actually start correctly.  There is a guide on how to proceed for Win7, but it doesn't work for Win8.  So we would know what to do differently with Win8 to make it work.

  Here is a link to the article corresponding Win7 so you will see what is asked:

  http://support.Microsoft.com/kb/922976

• How can I change the default start in 32-bit mode mode

  This is the message I get when I try to download my music to Musicnotesorder: Sorry, this plugin requires that your browser run in 32-bit mode. To change the startup by default Firefox 32 bit mode, click on the screen and select the menu item: "Show me the window"Application information"so I can put the 32-bit mode myself" I don't know what screen they are referring. How can I change the default start in 32-bit mode? Leanne Norman

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• Satellite L100 - how do I change the SATA mode in the BIOS options

  Hello world...

  Why is it in the laptop Sat L100 that there is no option in the BIOS-> advanced where in I can change the drive to SATA?
  I saw it in another PC Toshiba laptop

  Hello

  If this option is NOT available in the BIOS, then you will not be able to change that!
  In this case the controller HARD drive will tell in SATA mode and if you want to install an operating system then you need to install the SATA drivers first!

  Good bye

• Impossible to change the mode of the transceiver (4-wire 2-wire) for 485 USB serial port

  I'm trying to set up a USB-RS485 device, according to this knowledge base document:

  http://digital.NI.com/public.nsf/allkb/1D516C10D7EDFAC6862571110073B8F4

  However, all advanced under the port com series options are grayed out and is not possible to change the mode of the 4-wire 2-wire transmitter/receiver. How can I activate these?

  Thank you.

  On Windows Vista and later versions, these settings can only be changed in MAX as an administrator. Just right-click on the icon and choose 'Run as administrator' and everything should be made available to you.

• How to change the SATA mode to AHCI, no setting on the BIOS (Aspire E5 - 471P)

  How to change SATA to AHCI mode. Any setting in the BIOS (Aspire E5-471P-35Y2)

  Are you sure that your system is not already on AHCI?

• Satellite Pro A300D - SATA mode disappeared in end update BIOS

  In version 1.9 of the PSAK1E A300D bios there are settings to change the mode of the SATA controller. After updating the BIOS, it disappears. The cell phone was in non-AHCI mode before the update and now it is stuck there. Anyone got the old BIOS at hand (my backup is long gone)? It will completely go AWOL if I downgrade the BIOS version?

  Hey Buddy,

  Have you downloaded the right version of the BIOS of your laptop or another model?

  You should also try to load the default settings in the BIOS (F9).
  Check this box!

  To be hoenst I can t imagine that this option is no longer available on newer BIOS version

• Satellite L300 will not start even in safe mode

  Hello.

  Whenever I turn on my laptop, it shows me two options: start windows normally or perform a system repair.
  I tried both of these options, but I can't seem to access the page where I have to enter my password to access my desktop, I tried a number of things by pressing F8 during startup, including startup repair up to and restore to the previous point, but nothing happened.

  I have the vista operating system and it seems to freeze immediately after loading (the long rectangular bar with the Green thing from left to right, saying Microsoft Corp. below). It freezes... the page is all black and my cursor is there, I can move the cursor, but nothing is there to click on. HDD/ODD lights do not Flash indicating that the laptop is not all 'work '.

  In addition, it took me to a page where he was "collection of data for the crashdump"... don't know what this means but yes and it also took me to a page where it says 'one of your disks should be checked for consistency. He also posted a message saying that the registry file failure does not load. Systemreboot/System32/config/system

  I start it in safe mode and it shows a bunch of files and says please wait.
  After my computer goes on a blank page (all black) but I can see and move my cursor and it is bigger than usual so I guess he's about to go to safe mode, but just, he remains on the screen and does nothing else.
  He was about 35 minutes and it's still at this screen, that nothing has changed.

  Thanks for your help :)

  Hello

  Try to recover the device by using the drive HARD recovery option.
  I hope you didn t change anything on the HARD drive recovery partition.
  HARD drive recovery allows you to reinstall the operating system without the use of all disks!

  Turn on the device, press F8, choose repair my computer and choose the option to drive HARD recovery.
  Usually, it would begin the new installation of the OS. But note; HARD drive recovery option would be to format the whole HARD drive, which means that you will lose all files stored on the HARD drive.

  Welcome them

• Satellite L350-172 - slow HDD after set SATA mode for compatible

  SERVUS of Germany

  Yesterday, I bought a Satellite L350-172 and I installed Win XP pro on the HARD drive
  So far so good.
  Driver found on the Web site and so on that I spend in Bios the SATA Mode on "compatible" because the AHCI mode does not work with XP.

  In my view, disk access is slow and windows hang up so that the closing

  Does anyone know how to solve the problem?

  Thank you

  Hello

  It is not unusual that your HARD drive runs slower after the change of mode of AHCI SATA compatible.
  You have disabled the SATA feature and so you cannot use the benefits of SATA.

  And I must say that you are wrong buddy if you say that the AHCI mode does not work with XP.

  You can use the SATA in Win XP, but you must include the SATA driver first.
  Intel Storage Manager contains the SATA driver, and you could include using the nLite software.

  Good bye

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.

• Where can I find the service tab to start up in safe mode?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You that my system keeps freezing to high/locking programs.  Microsoft tells me to make a start up in safe mode. That's when I type in miscong.exe. When I type that in nothing happens. Microsoft says when I start in safe mode or before you click the service tab. I don't see it, don't see anything in this forum, referring to the this.are of the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You have the wrong spelling, type in msconfig and press ENTER. You may need to click on it and press ENTER again.

  Another way to start safe mode is to press the F8 key when you turn on the computer.

• SAS expander backplane directly reduce in SATA mode?

  I have a C6220 II with an Expander backplane of 2.5 ". However, I don't need performance of fast storage in this machine and want to use the PCI slot for something else, so I thought to remove the RAID controller and attach directly to the controller of the motherboard, which takes only supported SATA. My drives are SATA, rather than SAS, but I understand that this will not work because the controller should support SAS to use the Extender.

  I was wondering if it is possible to change a setting, perhaps a rider, to allow backplane running in SATA mode directly, rather than as an Expander, so that I can use the direct connection of motherboard? I only need two drives from the node, then I don't need to use the expander control.

  Thank you.

  Tentonin,

  There are no jumpers to move for this, you need to replace backplane with version 2.5 live Backplane part # WC17M (below)

  That will allow you to connect directly 24 SAS/SATA ports to 24 2.5 "SATA/SAS drives. Because it is a passive basket background, it does not support the flexible allocation of hard drives at the nodes; each node in the chassis will get an equal share.

  Let me know if it helps.

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Firefox is very slow, been using IE for a month. Nothing works except start PC in safe mode. 2 times, also uninstalled profile. Reinstall, resets, etc.

  also, disabled addons. See above. On win7. IE and google earth normal run. Abandoned, using IE for a month. On another PC so site reads the wrong plugins.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• Firefox starts in 32-bit mode, he says Firefox * 32... How can I get rid of this?

  Firefox starts in 32-bit mode, he says Firefox * 32... How can I get rid of this? Whenever I close Firefox and restart my computer it goes back to normal. There is also another problem associated with which is that whenever Firefox is 32-bit mod I listen to music the sound always comes not as clogged clear. When I restart my computer it is not 32-bit the sound returns to normal. I use Windows 7.

  Please note that the 32-bit versions and 64-bit of Windows Vista and Windows 7 can be used to run Firefox 9, only 32-bit versions of Firefox 9 are supported at this time. (see "System requirements" http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ )