Stat to the batch of EI

Similar Questions

• Get the context of the sequence of other connectors (active) in the batch processing model

  TestStand 2014 - model updated the batch

  LV2014

  System controls an environmental Chamber and doing trials on 4 of the UUT.  Room Enviromental is the shared resource and is controlled by the synchronization of thread only lot.  A UI TempMonitor of Labview (also synchronized lot) pops up, until you reach the target temperature and soaking time is over (so you can monitor returns to the House and see the amount of time remaining.  It all works fine in the system of warnings in.

  Now, there is a new requirement to take permanently UUT s to ensure that they remain in the State during the temperature ramp and soak period.  The simple answer is to integrate this track in TempMonitor UI because it has access to all relevant data pads.  However, I would need to do an end run around traditional return since it is only run by one of the four (up to).

  My thought is that if I had access to all active sockets sequence contexts, I could ask them their index and State, follow up and write the results to réécrirait a local variable before leaving the user interface.  The only thing that prevents me from going forward, it's that I don't know how to get the engine to give me the sequence for each Active socket contexts (0-3 which may be disabled via the setting ContinueTesting false instead of disable flag, it is a product of use pass 3rd batch of party model, so the executions of people with disabilities are marked as completed when running rather than wait).

  Or, Alternatively, how inspect all executions and to determine what decision he belongs (if necessary, because my data acquisition engine runs in its own, hidden, execution).

  Thanks for any help,

  Mike Webster

  Actually, I was looking for a way to get the SequenceContext for the other active sockets that launched the TempMonitor GUI, so I could put results in the other sockets directly.

  However, I gave it, and instead I am launch the GUI TempMonitor in its own thread and have each socket to monitor the status of USE on its own with a separate VI until what the ramp / soak temperature is how the GUI will highlight Boolean StationGlobal that triggers the individual to continue.  More complicated, but also in the spirit of TestStand to things, I think.

  MKE

• I want my procedure to return the error message in the batch file

  Hi team,

  I have a requirement from users of the company. Could you please provide your suggetsion to achieve this.

  We have a batch file that is short on time, in this batch file, I'll call you a SQL script.

  In the SQL script, I called you a procedure to run.

  Inside the procedure, I have the following statement,

  Select, insert and update commands.

  and I use ANOTHER exception to handle errors.

  My requirement is to pass the error messages for the batch file when one of the orders was not not run and send a notification e-mail to the group with the error text.

  Please provide your suggestion.

  Thank you and best regards,

  Robette.

  Could you please tell me, inside the procedure I have to remove the OTHER exception and how I can pass the value to the command file and where I add the content of the e-mail notification.

  I suggest that you write modular code instead.

  1. create a log table

  2 modify the procedure to log on to the error log table or exceptions

  3. that others suggest have the recovery/return procedure an exception in the client/batch file

  4. for an exception have the batch file to call a procedure to do the emailing if there were exceptions

  IMHO, it's a MISTAKE to try to put all these features in a single file. It is NOT scalable and makes it almost impossible to update the batch file if the requirements change in the future.

  Logging should be a separate process with a separate log table so that you can capture ALL of the information that may be necessary, now or in the future. Enter information in a table of newspaper, it is EASY for ANYONE to query to see what problems are occurring in the process.

  Emailing should be a separate process so that it can be used for your batch file current, files of future orders or even by procedures or functions in the database.

  Do not try to create a solution "a script does everything."

• PLS-00201 error occurs when the batch a stored procedure in SQL * more

  I have a batch file to run a stored procedure and the coil results in file. When I enter orders manually in sql * plus the output works very well and my results are spooling in the output file. But when I run the same commands in the script I get an error batch.

  
  Any ideas?

  Stored procedure:

  create or replace procedure MMP (p_cursor in the SYS_REFCURSOR)

  as

  Start

  Open p_cursorfor select name, id from table;

  end;

  batch file 1:

  sqlplus-s user/pw@REPORTDV @sp_output_spooled.sql

  sp_output_spooled.SQL script file

  Paste these commands directly on the SQL * more guest wraps the result as expected the value leader.

  the colsep value ' |'

  trigger the echo

  Set feedback off

  termout off Set

  set the position

  set linesize 9000

  set pagesize 0

  Set trimspool on

  headsep off Set

  output of the coil. TXT

  var refcursor rc

  run MMP(:rc)

  print the rc

  spool off

  output

  Errors printed to the output. TXT file after the batch is executed and error occurs:

  BEGIN MMP(:rc); END;

  *
  ERROR on line 1:
  ORA-06550: line 1, column 8:
  PLS-00201: identifier 'MMP' must be declared.
  ORA-06550: line 1, column 8:
  PL/SQL: Statement ignored

  
  ERROR:
  ORA-24338: statement handle not executed

  
  SP2-0625: variable printing error "rc".

  Hello

  Your code worked fine for me.

  Procedure MMP is owned by the same user that runs the batch file or does it means and appropriate privileges?

  VR,

  Sudhakar

• clarification of the statement in the study of materials

  Here's the question:
  
  You set the pool return directive plan resources. SCOTT throws a batch which inserts millions of rows. Total cancellation the space allocated to the Group of users is outdated. One of the incorrect results is "BLAKE can start a transaction... after SCOTT ends with error"
  
  The statement in the explanation is that (when the undo pool resource is exhausted) other users cannot start DML to cancel the space used by the other sessions of the group is released. But it seems when SCOTT ends its session is canceled and cancel it used is released.
  
  What I'm missing here?

  Given Undo are not immediately released but can be stored in the undo tablespace, light of retention settings account Cancel:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16508/logical.htm#CNCPT1080

  Edited by: P. Forstmann on 19 Jan. 2011 19:04

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• Current state of the iPhone folded 6 more question

  Hi all.  I'm definitely someone Android, but my two sons are big fans of Apple.  My youngest son who just turned 11 years old has an iPhone 6 Plus.  For a boy his age, he deals with amazing care.

  It has become recently folded, which often causes a white band at the top of the screen and there is a noticeable shift from the hole for the sim card.  How the elbow he got a mystery.

  I did my research, which seems to suggest that it is the result of a design flaw, but that's a guess on my part. Her phone is out of warranty, and as far as I can tell, his only real option Apple is a $329 out of warranty replacement.

  I realize that the people who devote their time and information here do not speak for Apple, but I thought that the perhaps some might have had a recent experience with Apple about it.  It would be useful if someone could give me an idea of their understanding of how Apple takes care of this for phones that are out of warranty.  I don't know if it makes sense to go to the Apple store and see what they will do or if it is a problem with a clear answer.

  I also found devices that supposedly will fix the problem and I have seen some videos of supposed solutions.  If anyone has some tips on the State of the art regarding this topic, I'd appreciate any help.

  Thanks in advance for any help.  On occasion, I sought help here in the past, and I've always been impressed that so many people volunteer their help to people like me who would be lost without it.

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to establish your repair options available via Apple, including the time and cost.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Unless you are in the USA, expect it to be available in Jamaica. People can not download content from iTunes Store from another country; This is why it is not an option for you.

  (143448)

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  When did start?  I have the same problem for about 3 days.  I downloaded and applied update of OS X El Capitan 10.11.4 Combo, ran disk utility and ran disk first aid.  Have not had a problem since (touch wood because it is only since the mid morning today).

  

• Airport Extreme works but the State of the led is off

  Airport Extreme works, but the State of the led is off, it is brand new and I can set up this last but the led stays off, showing no decided (green color or ambar)

  Could someone help with this?

  Thanks in advance.

  Hardware failure - defective leads.  Take that back for a new one, as big a PITA, you should.

• Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency?

  Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency? A book of dollar $50 USA could go to over $ 100.

  Apple print products are quoted and charged in the local currency

  and the calculation of your Exchange rate is whack too - the CD is $0.77 USD - no $0.. (50) but the exchange rate is not serious since quotes and fees are in local currency

  LN

• IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  You need not buy new Chargers.

  You need to plug adapter American Electric type.

  http://www.worldstandards.EU/electricity/plugs-and-Sockets/

  All computers/Apple iOS devices come with voltage: 100-240 v AC.

• PC Health Monitor - assessment of the State of the battery on the L50T Satellite-

  Last week, I bought a brand new L50t-A-145 8.1 Windows running. Beautiful machine and apparently everything works perfectly.

  However when activating the PC Health Monitor, he recorded the drums as being in a State of 'fair'... which means that there ' a loss of capacity, but it will meet the needs of most users. For a new machine, it is simply not good enough... I have a P845t that is over a year who never recorded the State of the battery as in anything other than "good" condition.

  I did a number of things (which, I hasten to add, I never had to worry about the P845t or also any other Toshiba laptop)... (1) I charged the battery completely and let run for sub 10% at least 6 or 7 times; (2) I uninstalled PC Health Monitor and downloaded the latest version on the Toshiba site and reinstalled (3) I completely reset the computer. All to... nothing is done, the battery status still shows as that 'fair '.

  The reason for which I got a number of options, is that it seems to me there is nothing wrong with the battery... it does not seem to take longer than usual to load and I appear to get the proper use of the machine as she throws... my little finger tells me that there is nothing wrong with the battery.

  However, in contrast to previous cell phones, this one comes with the sealed battery (one wonders who the nutter who thought about this or has it been done to overcome the concerns of airport security and other?). Therefore, if it turns out that something is wrong with the battery, it would mean the withdrawal of the front rear and associates of concerns. Or is it strange reading symptomatic of another potential problem with the computer?

  So I am sending you the machine backwards, but requested, before, if anyone out there can think of something else I can do to check the situation?

  Please keep in mind, I'm not particularly bright when it comes to computers, so any advice must be specified for a layman to understand!

  Thank you very much.

  Lindsay

  Thanks for the comments. I don't know what went wrong, but the essential is that everything is OK again.

  Discount to zero has been the good method to check the hardware and software features.

• Can not run the batch on Satellite L500

  Hello

  I had a Satellite L500 Home Premium Windows 7 build 7600.
  Now my problem is that whenever I try to run a batch file it never works properly.
  Even if the code is immaculate. I even tried the files of commands on other computers.
  a reason any the "@" symbol at the beginning of the batch in the off '@echo' code is not fair.
  I get that for almost all the commands I performed.

  "is not recognized as internal or external, command an executable program or batch file."
  Like a week or two ago I was putting "echo." in my lot to create blank lines. Then all of a sudden it stopped working.

  Can someone help me please?

  E-mail: [[email protected]]

  Thank you

  Hello

  > Now my problem is that whenever I try to run a batch file it never works properly.

  What do you mean that it is not working properly? You get the error message?