Airport Extreme works but the State of the led is off

Similar Questions

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• Airport extreme disconnects when the ivp6

  Airport extreme disconnects when the ivp6 but works perfectly with disconnected ivp6. I use Cox Cable as my internet provider.

  Apple says that Cox has not fully being implemented IPv6 yet.

  Cox said on their website that the Apple routers are not compatible with their IPv6 service.

  It is difficult to know who is right, but IPv6 works very well with Comcast and Time Warner... and routers Apple worked very well with Cox, until Cox began to make changes to their systems.

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• On Qosmio F30 TV tuner works but the picture is bad

  I bought a Toshiba Qosmio F30-140. It's great in everything except for a TV tuner. It works but the picture is too bad, although the sound is good.

  I've moved several times but without changing the antenna.

  I appreciate your help.

  Can I ask you what TV channels do you have received? Analog or digital?
  If you want to receive the digital channels, then you should be 100% sure that digital signals are strong enough.
  I read in trade journals that for most a weak signal has a bad influence on the quality of the image.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  Hello

   

  You did changes to the computer before the show?

   

  Method 1: Check the mouse on another computer and see if the clicks.

   

  Method 2: See the following article:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• PS is crashing.i can do work but the installation appears incomplete

  Tech said to say that PS crashes. don't know what that means. I can work with the tools that are around my computer screen, there is no bckgroun to block my screen so I can see the icons and it's distracting

  Please help an old lady.

  installation may be faulty?  I have same cs5 for windows and it works perfectly.

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  [Moderator edited the title to make it more clear]

  Former title read:

  had a split screen question in cs5. any help tel75405 told the post here.said ps is crashing.i can do work but the installation seems incomplete I can see my screen interface PS does not cover all please help an old lady

  If you prefer to have the whole screen filled even if you have a small image, go to the window > Application frame

  

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• Customer reviews second day in a row: and you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome.  I got the signature part via mobile phone to work but the submit button would not FIR

  Customer reviews received the second day in a row.

  And you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome.  I got the signature part via mobile phone to work but the submit button not not fire and typing method did not work at all.  Suppose what echosign knows the percentage of people who are currently working off the coast of their mobile phones.

  WTF?

  Aaron, no thanks to Adobe (and a big thank you using Google Apps,) I finally could solve this problem.  The way the document authenticates in the back-end is through Google + Apps Admin profile.  Once I entered in the Console administration, compatible Google + for the created domain a + profile for the admin of the field, the auto shape filled the signature form after that I have authorized access to authentication on the shortcut menu.  Not sure if your situation is in Google Apps, but even if not, I'd be willing to bet that the problem on your side is the account that is used for authentication when you open your form.  I hope this helps!