Similar Questions

• State HTTP 500 when I get a webpage with HTTPConnection

  Hello

  I have a method that get a string containing the HTML of a Web page source code. I use HTTPConnection utils for this. This method works perfectly, I've used this for another project, and I didn t have a problem. In my new project I want to use this method again on a specific Web page (I can´t say the URL of this web site).

  My problem is that this page returns a 'HTTP 500 status' error. If I use the BlackBerry browser, web load too perfectly and in the BB Simulator.

  I thought that the problem is the HTTP request header, and I've included a few properties of the request as:

  httpConnection.setRequestProperty ("Content-Type", rawInputContentType);

  Connection","keep-alive");
  httpConnection.setRequestProperty ("User-Agent", Mozilla/5.0 (BlackBerry"; U; BlackBerry 9360; ES) AppleWebKit / 534.11 + (KHTML, like Gecko) Version/7.1.0.190 Mobile Safari / 534.11 + ");"
  httpConnection.setRequestProperty ("accept", "text/html,application/xhtml+xml,application/xml,*/*;q=0.5");
  httpConnection.setRequestProperty ("Accept-Language", "es");
  httpConnection.setRequestProperty ("Accept-Encoding","gzip, deflate");
  httpConnection.setRequestProperty ("x-wap-profile","------"http://www.blackberry.net/go/mobile/profiles/uaprof/9360_80211g/7.1.0.rdf\ "" "");

  But the error is the same. The exception is:

  org.springframework.web.util.NestedServletException: Request processing failed; nested exception is java.lang.RuntimeException: de.arvatomobile.bdev.scr.exception.MissingDeviceDetectionHeaderExceptionorg.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:681)org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:574)javax.servlet.http.HttpServlet.service(HttpServlet.java:617)javax.servlet.http.HttpServlet.service(HttpServlet.java:717)info.magnolia.cms.filters.MgnlMainFilter.doFilter(MgnlMainFilter.java:108)info.magnolia.cms.filters.MgnlMainFilter.doFilter(MgnlMainFilter.java:216)com.mondiamedia.shop.magnolia.filter.MagnoliaContextFilter.doFilter(MagnoliaContextFilter.java:113)info.magnolia.cms.filters.AbstractMgnlFilter.doFilter(AbstractMgnlFilter.java:88)org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237)org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)com.mondiamedia.common.filter.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:83)com.mondiamedia.shop.vodafone.es.adult.filter.BlacklistFilter.forwardToBlacklist(BlacklistFilter.java:221)com.mondiamedia.shop.vodafone.es.adult.filter.BlacklistFilter.doFilter(BlacklistFilter.java:99)org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237)org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)
  

  Do you know why I get this error? Thank you.

  It s resolved. He had two problems. First of all, I am connected with the WIFI of my office, and it was very bad signal. The second, it was only necessary to specify the user-agent, other parameters of header gave problems.

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• Download link for Lightroom 6 watch State HTTP 500 error

  Hello

  Received an order confirmation email yesterday and after clicking on the download link, it displays as follows.

  HTTP status 500 - access token not issued!

  type of Status report

  message Access token not issued not!

  Description The server encountered an internal error that prevents to satisfy this demand.

  Currently based in China, I tried to download the file with VPN times on and off. However, the error remains.

  I'm on windows 10.

  Any help is appreciated. Thank you.

  Limit

  That the error you get when you download directly from a downloads.adobe.com looks like link but have not logged on www.adobe.com with your AdobeID.

  Try the links here, after you log in to adobe.com with your AdobeID:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

• Info that appears when you point to shapes

  1. how to turn off the feature that shows you the information when you use the selection tool, things like the word path, the coordinates X and Y, anchor etc.

  for what it is, you are hovering above?

  
  2 is this device commonly used by professionals, or is this something for beginners? Just curious.

  Thank you.

  View > Smart Guides (or 'Cmd - U').

  This is a feature that was introduced several versions ago. Since I have learned HAVE well before he was around, I rarely use it. I'm sure that some professionals of juror that she.

  Ray

• Internal server error 500 when you try to watch the missing page

  Only, I built my first website Muse - abbotsfordcove.org

  It is hosted by SiteGround and get the following message when I'm looking for a non-existent page:

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the administrator of the server, [email protected] and inform them of the time, is the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand.

  I submitted a ticket to SiteGround support and they tell me that they found the following in the server log:

  Demand exceeded the limit of 10 internal redirects because of the likely configuration error. Use of "LimitInternalRecursion" to increase the limit if necessary. Use "LogLevel debug" to get a backtrace.

  They suggest that the problem is related to the configuration of my Muse.

  This problem does not exist when I load the site at BusinessCatalyst as a test site.

  Any help with this is appreciated

  Rob

  Hi Rob

  The post is supposed to answer! Still looking for a solution?

  Thank you

  Sanjit

• GlassFish State HTTP 500 Apex

  Hello
  
  I well I'll make my life easier (as I am new to Oracle) by installing the Apex 4.01 on my Oracle 11 g on Microsoft Server 2008 with GlassFish Server Open Source Edition 3.0.1
  
  ApexListner and configured - works fine.
  Follow the instructions in Oracle to the letter, all work until I try to start the Application Express (http:// < mylocalhost >:8080/apex/apex_admin) and I get):
  
  HTTP status 500 - system unavailable. Please try again later.
  type: status report
  message: System unavailable. Please try again later.
  Description: the server encountered an internal error (System unavailable. Please try again later.) as he stopped to meet that demand.
  GlassFish Server Open Source Edition 3.0.1
  
  No idea how I can get at the bottom of this?
  Is it possible that GlassFish does not work on Microsoft Server 2008?
  
  Thank you very much for your help and your time spent watching my post.
  
  Izzy
  (Now I'll go and spend the whole weekend to worry about this)

  Izzy, can you check that installation XDB is quite valid.

  xdb needs permissions on the dbms_lob (shown before in a newspaper) and dbms_job to function. Also I had problems with previous CPU/security patch where dbms_lob is revoked from the public and had it break xdb and I also saw an apex install complain about the absence of privileges on the dbms_lob and fail, who then worked on the grant.

  Rob...

• How to set http headers when you are using the BridgeTalk HttpConnection object?

  Hello

  I'm doing http post requests from Illustrator ExtendScript (via BridgeTalk) and most of the time it works. However, the documentation on the use of HttpConnection is nonexistent and trying to find a way to set http headers. The HttpConnection object have once requestheaders and responseheaders property so I suspect it's possible.

  
  

  By default, post requests are sent with the header Content-Type "text/html", and I would like to replace so that I can use "application/x-www-formulaires-urlencoded" or "multipart/form-data".

  Here's what I have so far:

  var http = function (callback) {}

  var bt = new BridgeTalk();

  BT. Target = "bridge."

  var s = ";

  s += "if (!.). ExternalObject.webaccesslib) {\n";

  s += "ExternalObject.webaccesslib = new ExternalObject ('lib: webaccesslib');" \n » ;

  s += "}\n";

  s += "var html =" "; \n » ;

  s += "http var = new HttpConnection ('http://requestb.in/1mo0r1z1'); \n ";

  s += "http.method = 'POST'; \n » ;

  s += "http.requestheaders ="Content-Type, application/x-www-formulaires-urlencoded,"\n";

  s += "http.request = 'abc = 123 & def = 456'; \n » ;

  s += "var c = 0, t =" "; for (var i in http) {& t = (i +': ' + http [i] +'* '); c ++ ;} t =' FRONT ('+ c +):'+ t;} alert (t); \n » ; Debug: to see what properties and values exist on the http object

  s += "http.response = html; \n » ;

  s += "http.execute (); \n » ;

  s += "http.response; \n";

  s += ' var t =' AFTER:'; for (var i in http) {t += (i +': ' + http [i] +'* ') ;} alert (t);} \n » ; Debug: to see the properties and the values have been set after the execution of

  BT. Body = s;

  bt.onResult = function (evt) {}

  callback (evt);

  };

  bt.onError = function (evt) {}

  callback (evt);

  };

  BT. Send();

  };

  Things to note:

  1. If I try to set the property requestheaders as in my code above, the request fails. If I comment on him, the request succeeds. The default value for requestheaders is not set.

  2 looking at the http after a successful request object, displays the properties of reponseheaders to be on: "KeepAlive, connection, Content-Length, 2, Content-Type, text/html;" "charset = utf-8, Date, Wednesday, June 24, 2015 09:45:40 GMT, server, gunicorn/18.0, sponsored by, https://www.runscope.com, Via, vegur 1.1. Before the query runs, the responseheaders has the value undefined to.

  
  

  If someone could help me configure the request (in particular the Content-Type header) headers, I would be eternally grateful!

  
  

  Thank you
  

  
  

  UPDATE:

  Using the ExtendScript SDK, I discovered the responseheaders property is an array of this format: ['Connection', 'keep-alive', 'Content-Length', 2, 'Content-Type', ' text/html'...]

  I tried to put the requestheaders for the same format (I've tried both ['Content-Type', "application/x-www-formulaires-urlencoded"] and ['Connection', 'keep-alive', 'Content-Length', 2, 'Content-Type', "application/x-www-formulaires-urlencoded"...]) with no luck
  

  
  

  
  

  It solved!

  The key to set the content-type header is set the property http.mime as follows:

  s += "http.mime =" application/x-www-formulaires-urlencoded '; \n » ;

  Also to be complete, you can add your own custom steps headers:

  s += "http.requestheaders = ["My-sample-Header","some value"]; \n » ;

• How to solve the problems of Typekit fonts and error 500 when you publish the site of Muse.

  Hi guys. I'm a graphic designer and a web developer student. I recently created a site for a client using Muse and have problems downloading from the site. Typekit gives a 500 error code and stops the process of loading in "Export to HTML" and "FTP Upload". Any help. I would really appreciate it.

  Hi Kwacy,

  Please refer to: error: could not generate code

  Kind regards

  Akshay

• Code of State 800070663 when you try to run Windows Update

  I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

• ProBook 450 G2: password does not work when you try to open a session.

  I've been connecting to my laptop with the same password for several months now and then a few days ago, I tried and it wouldn't let me, it came up with an error message saying offline.

  The password was absolutely correct and checked caps lock shift was not on.

  Via the internet on the phone, connected to the microsoft site (with the usual password) account and it let me in.  From there amended past just in case.

  New password I tried and it does not always help.

  Having read several support elements and that you have tried various things but none have worked so far.

  They say to press the windows key, and then R to get the settings but that is impossible unless connected, which can not do.

  Any help / suggestions would be greatly appreciated.

  Hello

  It may be worth trying the following.

  Firstly, an electrician from the laptop to the router/access point.

  One when you're done, start Notepad and in the log on screen, click the accessibility icon in the lower right corner, select on-screen keyboard and enter your password using this.

  Kind regards

  DP - K

• When you click on all programs more say they are empty.

  Don't know what my kids did to our Windows XP laptop, but all the icons disappeared and when you click on all programs more say they are empty. I was wondering how I can return my games included with Windows for example.  I went on the Panel & clicked on add components, Accessories & utilities.  All I went to games on the internet.  No spiders, hearts, free cell, etc.

  Hello

  The following article might be useful:

  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty

• Why when I point where says "all programs", said the white box ' (empty), the same thing when I point to the administrative tools? How to reset to where he was before?

  I'm a novice help!

  Hi robertzee,
   
  -Did you of recent changes made to your computer before this problem?
   
  Method 1: Follow the suggestion given in this link and check if this may help in fixing the issue:
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
   
  Method 2: Try the following steps to get the contents of the folder "admin tools".

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click the article windows below:

  How to back up and restore the registry in Windows

  a. Click Start. Click run.

  b. type regedit.exe, and then press ENTER.

  c. in the Registry Editor window, navigate to these locations:

  • HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------Explorer------user Shell folders
  • HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------Explorer------shell folders

  d. delete the value named common administrative tools (if any).

  e. close Regedit.exe and restart Windows.

• Video running backwards when you apply LUT for the film Red 6 k

  Video upsets when we apply the LUT at 6 k red footage. Any thoughts? Also LUTS are not accurate color. Do not know what is happening.

  It seems that I can't happen again. It's a knockout is more upside in gpu accel or only the software. I fixed what it is rather than specify the SG where were my luts, I took the lut and installed in lut speedgrade file. Now he put on backwards. Must be a bug when you point to a LUT folder.

  The much bigger problem I had from the beginning, it's SG slows its unusable with some of the main LUTS I use. I use LUTS OSIRIS a color vision and they totally paralyze SG. I will make a change and it takes about 2 minutes to see the change take effect. It also happened when I tried 2 TITAN gpu in my system with 6 GB of VRAM. This work immediately in Davinci Resolve but SG dislikes them. Any chance there is a way to solve this problem on your side or mine? I use these all the time.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.