State of session always invalid after connection

Similar Questions

• JavaScript: box always invalid after the page

  Hello
  
  In a region, I have a check box that must be disabled by default. After clicking on a button that applies a MRU/present (and verification of certain conditions) the box should switch to on.
  
  What I did:
  -The Javascript of the enableCheckbox() and disableCheckbox() functions are defined in the HTML page header (they work).
  -In the foot of the region with the box I call the function disableCheckbox ('myCheckbox'); to get the default value.
  -The optional URL redirection of the button says:
  JavaScript:doSubmit('SUBMIT'); to submit
  JavaScript:enableCheckbox('myCheckbox'); to activate the checkbox
  
  The problem is that the box will switch on, because submit/reload the page to disable the checkbox through the foot of the region. Think of other solutions, I realized that each top up will set the default again...
  
  How can that be resolved?
  Thanks in advance,
  
  Roger

  Hi Roger,

  You must have somewhere a logic that determines if the checkbox should be disabled/enabled.

  Generally speaking, it would be the value of one or more fields and the box should be checked whenever the field related (s) is / are updated using the onchange event.

  There are several ways to check for this, but the principles would be the same. For example:

  function check()
  {
   var x = document.getElementById("P1_PAGEITEM");
   var c = document.getElementById("P1_CHECKBOX");
   if (x.value == 'XXX')
   {
    c.disabled = false;
   }
   else
   {
    c.disabled = true;
   }
  }
  

  This function can be used on the page loading - by adding a call to it in Footer region region - and the attributes of the P1_PAGEITEM using:

  onchange="javascript:check();"
  

  Andy

• CWindows system32mswsockdll, always disconnect and connect after wsock reset three times and that is to say money three times but look what I find___

  I start my dell Inspiron 1501 PC, norton internet security error box Monte, also I tried asking that to see what happens if I do not do anything and of course after five minutes "dial up connection" starts the numbering and connect to the internet after connecting I get the change of windows defender review box by known application system , change the execution of type app, cwindowssystem32mswsockdll. I have reset mswsock three times every success and also opt ie8 several times, something that I found too, that is to say the ie8 install the first installation was sstopped because the computer turns off, and the second installation did not have a log output?, gave an error of output? - auto launch, I connect together when I click on ie dial-up connects If I click on ie, it launches and connects and the disconnected i get Defender box, sometimes it will reconnect and aometimes not. Str, I also noticed after 80 updates or while on-site boot it takes about two minutes and the screen flash several times while loading where for a while. ?

  samy23244,
  Here is information on how to start using safe mode with networking: Advanced startup options 
  You can also try to boot your PC and test.  You must check with Norton on the way to disable their software while you test.  You can even get the Norton removal tool from Norton, then uninstall\re - install Norton.  I think the 'status' Tucker C was referring to the status of your Internet connection with Norton is disabled.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• java.lang.IllegalStateException: setAttribute: Session already invalidated

  Hi all

  I install webcenter sites 11.1.1.8.0 on a remote linux machine but after say 80% of the installation, I get following error:

  [2013-10-07 16:44:06, 603 IST] [ERROR] [http-bio-9084-exec-1] [fatwire.logging.cs.session] security control Exception for table tt1381142463992

  java.lang.IllegalStateException: getAttribute: Session already invalidated

  My database in the same machine not on.

  Kindly answer if one has faced this problem.

  Thank you

  Pratush

  Probably the installation takes a long time because of the connection distance. At the time of the installation where it ask you to deploy the webapps and restart the application server, you could increase the session timeout before restarting the application server. You can find it in futuretense.ini in the Sites WebCenter installation directory, property cs.timeout. You can assign very high (hours) for the duration of the installation, and then lower it again later if you wish.

  Installation can be very slow over remote connections, e.g. X 11 dug on ssh. You might get a slight speed increase using the arcfour in ssh encryption. To much better improvement you can use vnc on the server instead of X 11 over ssh.

  Phil

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Expiring sessions / are invalidated too early

  Hi all

  We have recently updated Apex 5.0.1 bug tracking application. Since then users complain to pass that their session expired error message and need to re-login, although they work constantly with the application and have not been idle. The behavior is not reproducible on demand. The application property 'Session duration in seconds Maximum' is set to dry 28800 (8 hrs), "Maximum Session Idle Time in Seconds" is set to 10800 seconds (3 hours). Neither value is reached, the problem sometimes happens also after working with the app for a few minutes only. The authorization scheme used by the application is set to "Invalid Session name of the procedure" pointing to a procedure that doesn't include that of:

  procedure invalid_session_proc is

  Start

  (wwv_flow). Show

  p_flow_id = > v ('APP_ID').

  p_flow_step_id = > 'LOGIN '.

  );

  apex_application.stop_apex_engine ();

  end invalid_session_proc;

  If the user simply is redirected to the login page.

  Questioning apex_050000.apex_workspace_activity_log I found two types of entries:

  
  

  one)

  ERROR_MESSAGE ERROR_ON_COMPONENT_TYPE ERROR_ON_COMPONENT_NAME APEX_USER

  person is ORA-20987: APEX - your session has expired - contact the administrator of the application.    WWV_FLOW_SECURITY FINAL_EXCEPTION_HANDLER

  APEX_USER is sometimes even vacuum!

  and

  (b)

  ERROR_MESSAGE ERROR_ON_COMPONENT_TYPE ERROR_ON_COMPONENT_NAME APEX_USER

  [email protected] ORA-20987: APEX - your session has expired - click < a href = "f? "p = 109:1:NO:" > here < /a > to create a new session.    WWV_FLOW_SECURITY FINAL_EXCEPTION_HANDLER

  I guess b type entries are created during a timeout values is reached, but why don't Apex sometimes think that the sessions are invalid / expired, even if they are still valid and product entries of type has?

  Someone has any advice on how to better analyze this problem? Because it cannot be replicated on demand, preferably a mechanism of the Protocol would be necessary which can be analyzed for example every day.

  No one can describe the algorithm that apex is used to determine that a session is valid or point to the documentation?

  Some setup information:

  * Apex version: 5.0.1.00.06

  * DB version: 11.2.0.3.0

  * Version of ADR: 2.0.10.289.08.11

  * Version of the glassfish server: 3.1.2.2 (generation 5)

  Any help will be greatly appreciated.

  Kind regards

  Christof

  Solution: the problem was caused by the browser asking favicon.ico when you open a file in a new browser window/tab instead of download. In our production environment, we use an Apache Web server as a frontend for Glassfish. In the Apache conf files a rewriting rule has been defined that redirect each attempt to a file in the root of the document to the login page of our Apex application. This of course also applied to favicon.ico, then all requests for this file invalidated the session of the Apex. After changing the configuration so that redirected requests for favicon.ico is no longer the problem disappeared.

• Disconnection in glassfish: Session already invalidated

  Hello

  I have an application developed in jdeveloper 12 c and running on glassfish 3.1.

  So here's the Disconnect feature:

  public String doLogout() {}

  FacesContext fctx = FacesContext.getCurrentInstance ();

  (Fctx.getExternalContext () .getSession (false)) .invalidate () (HttpSession);

  try {}

  fctx.getExternalContext().redirect("faces/login");

  } catch (IOException e) {}

  e.printStackTrace ();

  }

  Returns a null value.

  }

  But in glassfish, after that, I have an exception:

  Caused by: java.lang.IllegalStateException: PWC2778: getAttribute: Session already invalidated

  at org.apache.catalina.session.StandardSession.getAttribute(StandardSession.java:1226)

  at org.apache.catalina.session.StandardSessionFacade.getAttribute(StandardSessionFacade.java:152)

  at oracle.adf.share.http.HttpUtil.getAttribute(HttpUtil.java:102)

  at oracle.adf.share.http.HttpSessionScopeAdapter.get(HttpSessionScopeAdapter.java:473)

  at oracle.adf.share.http.HttpSessionScopeAdapter.get(HttpSessionScopeAdapter.java:465)

  at oracle.adf.model.BindingContext.getCurrent(BindingContext.java:193)

  at oracle.adf.model.binding.DCELResolver.resolve(DCELResolver.java:87)

  at oracle.adf.model.binding.DCELResolver.getValue(DCELResolver.java:52)

  at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)

  at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)

  at com.sun.el.parser.AstIdentifier.getValue(AstIdentifier.java:99)

  at com.sun.el.parser.AstValue.getValue(AstValue.java:158)

  at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:219)

  at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)

  at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)

  at org.apache.myfaces.trinidad.component.FacesBeanWrapper.getProperty(FacesBeanWrapper.java:61)

  to oracle.adf.view.rich.component.fragment.UIXInclude$ ContextualFacesBeanWrapper.getProperty (UIXInclude.java:705)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.getProperty(UIXComponentBase.java:1734)

  at oracle.adf.view.rich.component.fragment.PartialUIXPageTemplate.getValue(PartialUIXPageTemplate.java:204)

  at oracle.adf.view.rich.component.fragment.UIXPageTemplate._setupPageTemplateContext(UIXPageTemplate.java:164)

  ... more than 68

  If I comment the line "(fctx.getExternalContext () .getSession (false)) .invalidate () (HttpSession);", no exception is no longer, but the session is not invalidate so user can access without loging in. "

  Can you help me get a sign-out feature in glassfish?

  PS: in weblogic, I don't encounter this exception.

  Hello

  I'll be back to give you the solution to this problem.

  in your case, try this in your disconnection: (add line ADFContext.getCurrent () .removeScope (ADFContext.SESSION_SCOPE);)  Invalid session)

  public String doLogout() {}

  ADFContext.getCurrent () .removeScope (ADFContext.SESSION_SCOPE);

  FacesContext fctx = FacesContext.getCurrentInstance ();

  (Fctx.getExternalContext () .getSession (false)) .invalidate () (HttpSession);

  try {}

  fctx.getExternalContext().redirect("faces/login");

  } catch (IOException e) {}

  e.printStackTrace ();

  }

  Returns a null value.

  }

  Concerning

  Khalid MERIMI

• OLAP API INVALID after upgrading 10.2.0.1 to 10.2.0.3 &amp; remove/reinstall

  Hi all
  
  We had the test consisting of RHEL 5 with 10.2.0.1 environment. Last week, we decided to update to 10.2.0.3. Overall, migration went smooth except Oracle OLAP API, which became INVALID after upgrade. Here are more details:
  
  SQL > SELECT ComputerName, status, substr(version,1,10) version of dba_registry;
  COMPUTERNAME STATUS VERSION
  ------------------------------------------------------------ ----------- ----------
  Oracle Enterprise Manager VALIDATES 10.2.0.3.0
  Space VALID 10.2.0.3.0
  VALID interMedia Oracle 10.2.0.3.0
  OLAP catalog VALID 10.2.0.3.0
  VALID XML from Oracle 10.2.0.3.0 database
  Text VALID Oracle 10.2.0.3.0
  INVALID Filter Expression Oracle 10.2.0.3.0
  Rule Manager Oracle 10.2.0.3.0 VALID
  Manager workspace 10.2.0.1.0 Oracle VALIDATES
  Oracle Data Mining VALID 10.2.0.3.0
  Catalog of database Oracle 10.2.0.3.0 VALID view (s)
  Packages of Oracle database and the Types of INVALID 10.2.0.3.0
  JServer JAVA Virtual Machine VALID 10.2.0.3.0
  Oracle XDK 10.2.0.3.0 VALID
  Packages of Java database Oracle 10.2.0.3.0 VALID
  Analytic workspace VALID OLAP 10.2.0.3.0
  API of OLAP Oracle 10.2.0.3.0 INVALID
  
  There is a procedure available on metalink with the name "xoq_validate_verbose" (Oracle Olap Api disabled after upgrade to 10.2.0.3 - Note: 603179.1 )
  ).
  SQL > set serveroutput size 10000
  SQL > exec xoq_validate_verbose
  compat-> 10.2.0.1.0
  FRONT OF BOOTSTRAP
  ORA-37111: unable to load the OLAP API shareable library: (libstdc ++. so.5: could not open the object file shared: no such file or directory)
  AFTER BOOTSTRAP: REGISTRY. Not valid
  ComputerName: Oracle OLAP API
  version: 10.2.0.3.0
  status: invalid
  
  PL/SQL procedure successfully completed.
  
  Always the API Oracle OLAP was not valid. Then, I followed a procedure ' how to remove or reinstall the OLAP Option - Note: 332351.1'. Even in this case, it did not help.
  
  Can someone help me solve this problem.
  
  BR,
  --
  Anjum

  Execution of xoq_validate_verbose points to the problem if libstdc ++. so.5 cannot be found, perhaps, he does not exist or is not able to access because of file permissions. This file is installed with compat-libstdc ++-33.

  Enrique

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?

  1. How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?
  2. By default, the system says 2. and to not change/increase.
  3. is everything permissible special necessary to buy?
  Hello
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to maximize the number of RDP session for Office remote connections to the server. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• computer disconnects immediately after connecting

  my computer disconnects immediately after connecting. He did also thisin safe mode, no idea how fix

  Reconnect to your Windows XP work.
  Go to Start -> Run -> type regedit ->OK -> Regedit should start.
  On the left side, click on HKEY_LOCAL_MACHINE
  In the Menu , go to file -> load the hive
  Find the file C:\Windows\System32\Config\Software -> clickOpen
  Type a key TEST name-> click OK
  Now, on the left, go to the HKEY_LOCAL_MACHINE\TEST\Microsoft\Windows NT\CurrentVersion\Winlogon
  Once you have clicked on Winlogon, values will appear on the right side.
  Search
  Shell    REG_SZ Explorer.exe
  UIHost    REG_EXPAND_SZ logonui.exe
  USERINIT    REG_SZ be C:\Windows\System32\userinit.exe (preferred) OR just userinit.exe
  If the data are not the same then double click on the registry value (Shell, Userinit, UIHost)
  a screen opens where you can insert the data from the correct value.
  Once all 3 of these registry values are the same as above, then on the left side once more go up and click on
  HKEY_LOCAL_MACHINE\TEST
  Then in the menu, click on file -> unload the hive -> clickYES to confirm the unloading of the TEST hive.
  Quit Regedit, restart the PC and try again.
  If you are unsure of any of the procedures above, please let us know.