computer disconnects immediately after connecting

Similar Questions

• my computer disconnects me after 3 minutes of inactivity. P6310y model number

  My computer disconnects me after 3 minutes of inactivity. Model p6310y model numbert

  Hello

  Open windows control panel. Open preferences, click on screen saver link at the bottom right, and in the next window, uncheck the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change.

  Kind regards

  DP - K

• MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

  The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:

  (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time.  After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately!  Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS

  HeinrichDS

  Recommendation of the Palcouk of sense what is the operating system and is worth a try.  If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista).  In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why my computer disconnect automatically after 1 minute?

  I just got the update service pack 2 since then my computer has automatically disconnected every minute. Yes I turned everything in power forever mode, or even in advanced setting. and my screen saver is disabled

  Even if your screen saver is disabled, you must uncheck the box that says on resume, display logon screen or increase the time.

  There is still no service pack 2 for Windows 7.

• connect with the windows computer using usb after connecting to the wireless mac

  Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

  Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

  Hi Rekjek,

  On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >
   
   

• Discover 5.2 recompose pool linked clone - Wait for user to logoff - refresh immediately after logoff - connected on VM never reconstruct after the closing session or refreshment.

  Lets say, we have 20 clones related hen who has refresh immediately after logoff. 10 people are connected to VM 1-10. When plan us a restructuring of the entire pool, one would expect that VM 11-20 would recompose afterwards, as the newspaper of people out of 1-10 of Vm, the VM redial for the new replica. Instead, VM 1-10 are refreshing to a control point and recomposing replica ever again. It seems that when refresh after logging has not been defined, recompose work properly. These two elements are mutually exclusive?

  I guess that's what you're talking about?  http://KB.VMware.com/kb/2006707

  If so, Yes, this is a known problem, updating of log will cancel and replace a Redial on newspaper.  I raise this issue until I got was blue and you have heard that it will be corrected in a future version

  For now, I do it manually reconstructs in the pool > inventory tab > desktops (see composer details) > right-click on desktop > redial.  Usually, I do on a single desktop computer and let the replica to create and lots of then recomposed.  As recompose and selecting force their users to disconnect will do the trick also.

  Moderator Note: edited the post to remove NDA restricted information.

• WiFi connects immediately after starting

  Hello community,

  I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

  Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

  Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

  I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

  Any ideas?

  (El capitan)

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Computer disconnects from the local network after a while

  Hello

  the place I work has a local network with nearly 20 computers.
  One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

  The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

  I have already disabled the drive for energy savings computer network mode.

  What can happen and what can do?

  Thanks in advance,
  Felipe Sousa

  Hi Felipe,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your computer disconnects from the local network.

  I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller

• The computer remote Remote Desktop connection error disconnected

  Hello

  I have Windows 7 on my desktop PC and connection Remote Desktop was working fine up until yesterday.  When I try to connect to the my home office PC (desktop and laptops get the same mssg) he now gives me an error that says "Remote Desktop Disconnected - this computer cannot connect to the remote computer.  Try to connect again.  If the problem persists contact the owner of the remote computer or network administrator. "Nothing on the remote PC has changed and I've checked all the settings to make sure that the remote connection has not been disabled on the desktop, but everything seems fine.

  Thanks for your help.

  Hi JenniferP,

  Because the question you posted is related to the Remote Desktop connection error, it would be better suited in the Technet Windows network. Please post your question in forum Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.