State of the button

Similar Questions

• change the State of the button

  Hi, I'm new to labview and I have a few questions.  I came to a point in my code where I'm stuck.  I have attached the code so you can see where I am.  My problem comes into play with the toggle button.  I need to know if there is a way to change its operation based on a condition.  I want to it have where when you press the button, it remains pressed.  But if it meets a condition, it turns itself off.  In my code, I have a point where I need an output message, but because the State of the button does not change, it keeps out the message unless I have disable the program.

  If that makes sense, anyone know of a solution to this?

  Thank you much for the help in advance.

  You can use a local variable of the control inside the structure of case where you write a fake to she to him popping up when you need to.  Your not actually change its operation, but it allows you to programmatically change the current state of the button.

• All the States of the button convert objects

  Is there a function to convert all the States of the button objects?

  Button to convert to object"function converts only the active state, other States are lost.

  I don't know why it works this way because multi-state objects have an option to "liberate all the States of objects.

  Of course, I can do it manually by duplicating the button, selecting the rule of law and by converting each State of the button to an object. But there may be a single function for this as with the multi-state objects?

  Sorry about that...

  Here's the script for the button:

  var i, b = app.selection[0];
  
  for (i = b.states.length - 1; i >= 1; i--) {
         b.states[i].releaseAsObject();
  }
  
  b.convertToObject ();
  

  Hope that helps.

  --

  Marijan (tomaxxi)

• How to get the State of the button?

  I want to know how to get the State clicked the button? If it is clicked State or State clicked?

  For ex: I have the following code...

  {( < composants: IconButton id =»bold_btn"largeur =»22" icône =»@Embed('/assets/bold.png')"click ="onBoldClick ()"enabled =" {}this.loadCompleted}"toggle ="true"/ >

  How to find if the "BOLD" button is checked or not?

  this.bold_btn. ???

  Please mark

• How to change the initial state of the button text?

  blank_page

  The initial state of a button switches is one established in IUR editor before the program runs in the Panel of property whose screenshot you have set. I'm not aware of a way to programmatically change the IUR, especially if the target computer is not installed on the development system.

  If for some reason you won't change the default value in the editor of the UIR, then what you have to do is to define the corresponding attribute BEFORE the Panel opens and possibly call DefaultCtrl before you set the value by default so that the control is set programmatically by default, you have just put , depending on what it is.

• State of the button does not

  Creates a button that has worked fine the first download.  slightly modified its size and now States have stopped working.  It's back to the top at the bottom of the page:

  Cakes for weddings, birthdays, events | The Cakery - Bristol Tea Cup

  The button above, it works fine.

  any help much appreciated.

  I had for some reason any two images of background on one of the button States. Click on remove the background and it worked perfectly.

  Thanks to ankushr40215001

• State of the button to trigger an action

  I am trying to create a button that when clicked will perform several actions: play a short audio and access to a slide. Is it possible to do by assigning an action to the button state down?

  You never raise the action of a State, always by the event of success of the

  button.

• Preserve the State of the button is hidden or shown if reintroduction SCORM?

  Captivate 9, sensitive, hosted project in Moodle LMS.

  I buttons of smart form in my project question slides that are hidden until the learner responds correctly, how they are displayed. When a student leaves a lesson and returned later, the answers that they are kept, but the button States are not. I guess I must be reports the status of button as an interaction of quiz to my LMS so that it be preserved. Is this the case? How can I do? Otherwise, how could keep States to buttons for several sessions? I could attach their visibility to a function that shows them if the response associated with the identification of the question is not an empty string, but I'm also not sure how interrogate put responses cached.

  Any help is very appreciated! Thank you.

  States should be bound to a variable, the Variables are stored in the suspend_data, so they should be recoverable, with the exception of the TEB variables associated with the ETB itself. You will then need to perform an action of tip to check this variable and display it.

• States of the button (up/down/over) image does not work properly.

  The pictures below show the button before and after flying. I work in Captivate 9 - responsive project

  Why pointed State does not automatically the same size as the 'low' and 'up' State?

  How can I fix?

  

  You can check the exact version number? There was a fix published, which gives the 8.0.0.230 version. That the problem has been solved with the fix:

  Hot fix | Adobe Captivate questions 9

  Why an image button and not a form button?

• Glow internal change position of text effect when used with the State of the button.

  I've seen other old discussions on this topic.  I'm trying to use the inner glow on the mouse down state of a button.  When you apply the inner glow effect, the text is pushed down into the text box to the position that it is in normal state and the substitution of the.  How to do this?

  Attached images show the a screenshot of what the mouse to the low State looks like muse with the glow effect used inside.  The second screenshot shows the real effect with what is really happening by using the preview of Muse (the same thing happens in Safari and Firefox).  The metrics of positioning between normal / roll the mouse downwards and above are identical.

  Help, please.

  

  

  To work around this problem, the simplest method is to add a shine to other States, but use the background color for the glow. This creates the same offset as the rollover State but does not display differently.

• States of the buttons in Captivate 7

  Hello

  This may seem a stupid question. Believe me, I'm frustrated that I can't understand it myself. I'm new to Captivate and I am trying to create a button that has a rollover State. I managed to insert the button and style and the way I'd like, but I can not find the property settings to create different States.

  Is it not possible in 7 Captivate?

  Thank you!

  Tim

  Hi Tim

  If you do, use an Image button. You create three different images to use. One for the natural state, one for wriggle on and one for clicked.

  Regarder watch in the properties of the button object, then make sure that the type is set to Image. Then you will see the images. There is also an icon of navigation file that you can use which will open the location of the existing images. This will help identify the naming convention that you must use if you use custom images.

  See you soon... Rick

• State of the button implementation

  I'm sure that there is a simple answer to this, but he made me hit my head against the wall. Is it possible to have the button that I create in return for Fireworks at the high state image after a click and the mouse is off them?

  This is useful. Thank you! I was messing around symbols of button (Flash to think), but I need to work in the behaviors panel.

• How can I test the Boolean State of the button action?

  Hello
  in as2.0, how can I test the Boolean value if a key has been pressed or not?
  
  I have a function simple im trying to work with like that...
  
  button_btn.onRelease = function (success: Boolean) {}
  If (success) {}
  trace ("we pressed the button value is true");
  }
  else {}
  trace ("value is false");
  }
  };
  
  working with Boolean values in this way is new to me - pointers will do - thanks!
  

  I got it! Here's a quick run down in a table format, hehe

  cry [0]...
  [1] create a Boolean variable
  [2] create your switch case statements correctly //which I have...
  [3] condition your Boolean in case statements
  [4] and then create your button managers
  [5] if the Boolean value is true, then say stream_ns.seek (0)
  [6] happy!

  Thanks again K - have a nice day.

• Text on the State of the button

  I have a text field on a button. but I can't communicate with the button with the text above in layers. How would I fix this?
  
  Thank you
  
  Anthony

  set

  _myTextField.mouseEnabled = false;

• States of the buttons on a master slide

  I want to put the navigation of the full course on more than one slide master.  I have read that you can only use active forms in the form of buttons on a model of slides, I could work with, but how do you declare for these buttons?  Ideally, I would like to text buttons since this is what I'll do, but that doesn't seem possible...

  Is there a solution for this?

  Buttons of form could have States on master slides in 8 but this feature has been

  lost in the CP9 and is not always restored after two patches. I am very sad

  on it, he connected immediately when 9 is released more than 1 year ago

  but it seems not important enough. You face two old States

  as in version 7.