Kernel_Security_Check_Failure blue screen of death. First Pro CC 2015

Similar Questions

• Blue Screen Of Death - Win7 Pro SP1

  Hello

  I have a laptop that keeps blue screening on me. It happens very random, as and when it chooses.

  I can also trigger to start, if I touch the trackpad while it loads to the top.

  I downloaded a piece of software to play the file minidump as another suggested Web page but I couldn't work out how to open the minidump file...

  Here is a link to the dumpfile on dropbox https://www.dropbox.com/s/a90850hfcd39ti6/080416-27955-01.dmp?dl=0

  Please notify.

  Thank you

  Nathan

  Well done.

  This BSOD involves the driver Synaptics Touchpad (perhaps now closer):

  Probably caused by: SynTP.sys

  And that fits your BSOD

  

  The Atheros network driver is still looming too, but just to make an adjustment at the same time, so you will know what fixed it.

  On the HP support page, there are a few reports of BSOD with Synaptics and (as usual) HP support said to resinstall your operating system from scratch, but it's a lot of work so see if a newer driver help.

  There is a newer version of the Synaptics driver from the support page of HP you can download/install:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5098190

  Start here:

  

• Blue screen of death by practicing a new game.

  Hello

  I use windows 7 64-bit operating system.

  I just installed a game called "counter-strike: overall offensive". "." First of all, he played normally, but after an hour it says their where some files missing, I've fixed the game. When the repair has got 100% my computer immediately got a blue screen of death (first dump file). After I played the game again and it did not work normally. Suddenly, after a few hours, I got another blue screen of death (second dump file).

  So, I came across the forums hoping that I would get some answers.

  Sincere greetings,

  Tarik Atac

  Annex:

  This is the dump files.

  https://onedrive.live.com/redir?RESID=957D95FE262ED04! 115 & authkey =! ADZDM5hlqc1FDYs & ithint = file %2 c

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• What to do...   When I start photoshop cc I get a blue screen of death Kernel_security_check_failure?

  When I start photoshop cc I get a blue screen of death Kernel_security_check_failure?

  You have an Nvidia GPU in your system?

  If so, you have installed a Nvidia driver with a serious bug in it.

  Contact NVidia to see if you can use their beta driver, or if you need to download an older driver to avoid this bug.

• I tried "Remapping ACTIVE" in BIOS > Advanced tab in my Windows 7 Pro 64 bit, 8 Gb RAM (3.24 usable) computer and get the Blue Screen of Death.

  My computer is

  Intel Core i7 860 @ 2.80GHz processor
  Installed RAM 8 Gb (usable 3.24) - G.SKILL RIPJAWS, DDR3 1600 GB PC3-12800 2 x 4 sticks.
  System type: 64-bit
  Motherboard: ASUSTek Comp Inc.  Model: P7P55D
  BIOS Date: 2009-12-07 Ver: 08.00.15

  Operating system: Windows7 Professional 64-bit Service Pack 1

  GeForce GTX 275
  Tried "Remapping ACTIVE" in BIOS > tab advanced, then restarted and the system was fine and kicked + 100%
  (Checked system properties - display of 8 GB of RAM installed perfectly usable)
  then stop.  Then restarted the system, but after the system attempts to restart I get "Blue Screen of Death" - unstable system and "Dumping Memory.  So now, he is off again.
  Necessary assistance in this regard, been looking for solution for a while.

  Dear Gerry,

  I think I solved my problem.

  I have reset the motherboard and CMOS by removing the battery.

  I now get on my system properties
  -installed memory 8Gb and (usable 6.99)

  Thanks for your help once again.

• Blue screen of death during recovery

  Apparently, the latest updates from MS caused problems and I had the blue screen of death during the start several times on my Pavilion p6610f desktop computer. I try a system recovery and got the screen died shortly after the recovery began. Now it does not start or even turn on a screen.  Any help would be appreciated.

  Well, this is my fourth attempt at this announcement, I hope it will work this time.  Below are my answers to your questions.

  Hello jp-3,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are not able to boot your Windows computer after attempting a recovery, and I'd be happy to help you! To start, I have to ask you a few questions:

  Mech Hi and thanks for your help.

  • What is product and model number from your desktop?

  It is a Pavilion p6610f desktop PC

  • What version of Windows you have installed on your computer?

  I was running 7 Home Pro

  • Has your computer finished all his important updates from Windows?

  The updates had been installed, which was when I started to have problems

  • Have you updated your drivers from HP the HP SupportWizard?

  I didn't have a chance to update anything after you restart MS. updates He immediately started crashing. I restarted three times and got a truncated blue screen every time, that's why I tried the recovery.

  • What is a current or recent problem?

  He started just after the latest version of Windows update.

  • You are able to get an image from another monitor?

  In general, I run two monitors (bothHP) via USB converter j5create JUA310, which I unplugged in case of conflict. It crashed with two configuration simple and double monitor. When I was running food, I had only the primary monitor upward.

  In the meantime, I recommend that you follow this document on screen is blank after you start the computer. This should help with the display on your screen when you start first to the top of your computer.

  I unplugged everything - HP Color laser printer duplicator Kensington USB port and USB mouse Logitech wireless (wired mice HATE!). Had previously removed just in case USB Sandisk flash drive. The computer started, monitor went up, and I received a message "windows recovered from an unexpected shutdown - check online solutions. Did respond to the message again. Did not try a BIOS update.

   

  Thanks for your help!

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

  MechPilot
  I work on behalf of HP

• Blue screen of death: stop error: 0X000000CE

  Hi, I think I got a bad virus on my computer that's all waste.  First of all, it all started when I clicked on a link, while the Christmas on Black Friday shopping. Then I got a download of unwanted software, called system difficulty, (the small icon of Windows) I could not use system restore to remove, whenever I tried to use it, it says cannot restore on this point. Tried several other points, but no joy. Can I get the dreaded blue screen of death with a stop error: 0x0000008e (0xc0000005, 0x804f8e80, 0xef76aa98, 0x00000000). Could sail in safe mode and tried to fix it with antivirus software, found 26, abducted, ran spybot search and destroy, found nothing. Still no joy. So today, I tried to start in safe mode, and it does not work in safe mode, guard reboot again and again. Then I hit F8 and turned restart turned off so I could see the Blue error screen that would flash for just a second, and now I have this stop error message: 0x000000ce (0xf88be6dc, 0 x 00000000, 0 x 00000000, 0xf88be6dc). I read forums on video and all drivers, but this happened just after I clicked on this link and got the virus with this unwanted software download. Anyone got any suggestions on how to solve this problem? Oh and I downloaded a program called error repair of my other computer and installed but it only scan my computer to find errors and then he wants to buy you the pack premium, so that did not help. It's my computer business running windows xp pro service pack 3. Wish it would have been on this cause she has the system recovery and it worked whenever I had a virus, I couldn't get rid of that. Thank you, Steve

  JoseIbarra is the expert resident on the Recovery Console and chkdsk/r. I'll track down his instructions. If the malware is responsible for the BSOD, I do not think that chkdsk /r will help, but it won't hurt. Or you might need to repair your boot.ini file.

  DEFINITELY get this brand XP reinstallation CD Dell! You can use it to perform a clean installation of XP or a repair installation of XP (chances are, you won't ever need to perform a repair installation, but it is nice to have this option) or to enter the Recovery Console to perform functions such as chkdsk/r.
  Chances are that your data does not fit on one CD! Depending on what you have, you might need to up to 100 CDs or more! Better to buy an external hard drive. Newegg.com has a very good selection of the most affordable. Here is an example:
  http://www.Newegg.com/product/product.aspx?item=N82E16822148409
  Creating a Ubuntu CD bootable 'live' (and then startup out of it, rather than on your hard drive) will allow you to copy your data to the external hard drive:
  https://help.Ubuntu.com/community/LiveCD
  There are also some other CD bootable antivirus (like Avira) which may help you:
  http://www.livecdlist.com/purpose/Windows-antivirus
  Here is a link to the instructions of Jose:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help in installing Windows 7 - blue screen of death error

  Hi all.

  I bought my new laptop yesterday and I tried to install Windows 7 Ultimate on it, installation is fine, but when it comes to the "Complete the Installation" part, the screen flashes once and I see the blue screen of death. I know that there are no hardware issues or disc problems.

  The laptop that I bought is a Toshiba Satelittle L50 - B - 11 c and the version of the BiOS is 1.40 if necessary.

  Is it preloaded with an existing version of Windows already?

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Resources:

  http://support.Microsoft.com/kb/2832566

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• Blue Screen of Death... Urgent!

  Hey all. It's a little urgent, so any help is appreciated. So the story:

  It all started last Saturday in the fourth. I plugged my 5s 32 GB iPhone in car charger and it blue screened, what frightens me. I quickly unplugged and and soft restarted as soon as I saw him, and everything was fine.

  Since then, so three days later, I had to restart about 50 + times. So today I got sick of this blue screen, and I decided that I would try to fix it. I looked around solutions, and many say that it happens shortly after a solution when you remove the screen, but I've had my phone for four months and have never had to remove from the screen.

  The next solution was to restore factory default, so I decided to try it, after that I backed up in iTunes which is

  Finally, I was getting it restored, when all of a sudden, BAM. projected again blue.

  Since then, happened across this restore Middle blue screen of death, and it's practically a piece of metal shit now. I can't do anything. I can't force the restart it you a blue screen. Can someone give me advice? I have some upcoming vacation and need my phone. Can anyone help?

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you tested it on an Apple Store.

• Satellite M40-236 Blue Screen of Death

  A few days ago, I bought a Toshiba Satellite M40-236. I hated the pre-installed Windows XP Home Edition and installed Windows XP Pro with SP2 integrated. Subsequently, I installed all the drivers provided and recommended by Toshiba of: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&teddProduct=5 38 & cmsFamily = Satellite & cmsSerie = Satellite + M40 + Seri are & cmsCategory = Notebooks & mode = allMachines & action = s earch

  Video update of Bios, drivers and so on. Everything was well worked, installed all updates from the Microsoft update site and then tried to install Windows Media Player from the microsoft site. Then, when tried to open music file in media player him wound up Windows down with the blue screen of death. After the reboot, the blue screen remained. Tried to load in Safe Mode, last good known... no result... still blue screen.

  Tried to reinstall Win XP it Recovery DVD - Rom, the same result... after that the files are copied to the HARD disk and the system is restarted, Win XP Logo current with progress bar and suddenly Blue Screen of Death :(((

  Tried to do to reinstall a different version of Windows (2000, XP Home, Xp Pro, 98SE)-no result after that it says from Microsoft Windows (during installation), the blue screen of death and nothing more... STOP: 0x0000007E or STOP: 0x0000007F.

  Maybe someone has the same? Can be any solution to this problem? I think because of the laptop is a new... maybe there's sth with RAM?

  Hello clotidle

  Well, it very difficult to tell what the problem is.
  I don t think that the BIOS is wrong because as a wrong
  The BIOS update procedure has damage to the motherboard and it is not possible to run or start anything.

  Sorry I n t have a proper answer.
  In my opinion, you should contact Toshiba service partner because I don t think that you will solve this problem yourself.

  PS: You can downgrade the BIOS t.
  Only the AEP has a possibility to do so.

  Good bye

• Why is it called 'Blue Screen of Death?'

  Why is the Windows crash screen called the 'Blue Screen of Death"when some people who don't know much about computers think that a BSoD means a blue screen that kills you when it's really just an error message?

  Hello

  The BSOD made his first appearance in 1987 during the beta of IBM "Operating System/2 (OS/2) developed to lattice, stir; the developer of the first OS/2 and Windows compilers. The STOP error screen hit the OS/2, when developers were porting to other tools of lattice, Inc. over the internet. The reason behind the error seems to be bugs (it means vices or defects in more technical terms) in the OS/2 software. While giving the error description of IBM (informally known as "Big Blue", then), developers of lattice, Inc., called the error like "Blue Screen of Death", combining colour with IBM and an appearance at the dead screen that comes not depart without rebooting.

  Another story, it's that the BSOD error was originally a "Black Screen of Death" (as some say) instead of "Blue Screen of Death". The term BSOD was initially given its name by Ed Brown in mid-1991. Ed Brown was then an IT technician with Coca-Cola Company, Atlanta, Georgia, United States. Ed Brown reported that the error has hit when the company implemented (Windows 3.0 operating system) in the world of Marketing Group, and the users when you try to run "WordPerfect" would randomly get BISOD error screen. The error would display a completely black screen with a cursor blinking in the upper left corner. This would happen when a user tried to run a DOS application and eventually got stuck with the BSOD error. The system had no escape from the BSOD error until it is restarted.

  The BSOD error is usually written in white text on a blue background.

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue Screen Of Death - IRQL_NOT_LESS_OR_EQUAL

  Blue Screen Of Death.

  IRQL_NOT_LESS_OR_EQUAL

  First error Code:
  Stop: 0x0000007E (0XC000001D, 0X80S1B80C, 0XB84EBB64, 0XB84EB860)

  Second error Code:
  Stop: 0x0000000a (0 x 0, 00000002 00000001, 0X8A328008, 0X8052392F)

  Give you information generals just formatted my entire disk, reinstalled windows xp lite, computer starts end of run, stopped randomly after some time with bsod, Changed my setting to not restart when appear the BSOD is so I could get the code, I suspect material, but if it was I don't think that the code would stay posted as long as he did as I went to work from 22:00 Home from 05:00 and the code was still up on the screen with the computer running, any suggestion would be appreciated.

  As a side note, I replaced the battery cmos in my bios and bios was showing on my first screen and then the next day I turned on the 2nd moniter (dual screen) and the bios showed on screen but the first would be empty, I already had a stick of memory on the 3, I bought so he won't miss me about 6 months ago... Maybe 2 others are underway.

  Data sheet:

  Motherboard: Gigabyte EP45-UD3L
  Video card: Nvidia 8800 GTS

  Memory: 2 X 1 GB Crucial LED DDR2 at 800 MHZ

  HD: Segate 320Gig
  Processor: Intel Quad-Core

  Although eithor way that I need to update my hard drive & ram and if it is the mobo, I got an another year on warranty so I just begin to replace ram and move from there, thanks for the help I really appreciate it, I'll come back to that in a few weeks and post or not material is the question , but I agree that it is probably.

• Blue Screen of Death UnMountable_Boot_Volume 0x000000ED

  I get the same message on two desktop computers.  Two of these errors occurred in few days when computers "freeze" while he was working and there was no way out except to turn off and loose.  Neither has been able to load Windows since!

  Both are running Windows xp professional that has been purchased for each computer an update for XP provided on these computers.  I UPGRADE the two original install discs, but I can't use the drive for repairs because the computer boots apparently directly from the HD.

  I still go into this loop.  Windows has encountered an error.  Please restart in: safe mode, last known config or normal etc).  Of course, none of these options do restart except the process of starting the same way.

  I got to the Console of Microsoft recovery with some extra options, but that takes me right to the Blue Screen of Death with details about the error message: Unmountable_boot_volume with the hex codes (the first being 0x000000ED on both computers).

  I found several solutions on the internet, but they all assume that you can go to Safe Mode and run other programs like Chckdisk.  But I just can't.  I got (accidentally I might add) on the screen of the Bios utility.  Maybe it's (HP) computers or age, but on one of the computers, the BIOS page it shows:

  Configuration of the BIOS:

  Master of the first string: Maxtor with numbers.

  First channel slave (none)

  2nd channel Master (HP DVD Writer)

  2nd channel slave (IDE-DVD-Rom 16 x)

  3rd channel Master (None)

  4 channel Master (none).

  In the BIOS utility menu, I tried the F5 to reset the values by default, recorded and released, but everything is still show no change.

  I spend more than 2 hours on the phone with HP trying to get this resolved nothing doesn't.  The technician that I talked to had no idea how to fix this error - even if he said "no problem we will fix that in a minute."  While with this technology, I disconnected everything, rebooted several times by pressing F8 F9, F10 and DELETE, F1.  Finally, he said that the best thing I could do was wipe my hard drive and reinstall the software.

  Of course this is not a solution if the start of corruption can be solved.  And besides, even if I was willing to do that (I'm not still), how the hell I get computers to reinstall the software for two obvious reasons: 1) I have windows XP upgrade disks are installed and 2) the computer cannot read the discs anyway.

  I searched and found a lot of "bugs" on the internet, so it must be a fixable problem.  But most of the solutions assume that you can access your BIOS and change (even if nobody ever says what you should change to?), and then run the patches since the installation of XP discs.  I was also on many other sites that provide a Bootable CD to start Windows XP, but I can not get my computer to see the CD before it starts up.  I tried all suggestions as press F2 when the computer is turned on, and then select boot from CD.  But while on a few occasions, I got the "press any key to boot from CD" (once accidentally so I do not know how to get this message again), it doesn't matter what key has been pressed, it just took me in the loop.

  Does anyone have an answer that starts from the beginning assuming that the computer will not read from the CD and walking then how to understand and fix this problem.  I am sure that there is someone out there who knows how to help with this error message.  At least I hope.  I'm not technical, please keep answers in simple language.  Thanks a lot for your help

  Hi LucyAdams,

  You can follow this link & check if the problem persists.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  
  Reference: Unmountable Boot Volume

  Hope the helps of information.
  Please post back and we do know.