State of the event - not connected

Similar Questions

• Windows 7-3 beeps every 30 seconds while logged in (not around the screen of the Bios, not connecting)

  After that I connect to Windows 7, I hear 3 rapid beeps every 30 seconds. It does not go far, i.e. it is not a time of presence and repeat indefinitely. I ran Diagnostics through bios and see anything there (no hardware problems). If you cut the speakers it disappears is not an internal part, like the motherboard. Any help would be greatly appreciated.

  Hi Mark,

  I appreciate the efforts to try to solve the problem. Please write us with the following details.

  What is the brand and model of your computer?

  As you mentioned that you do not receive this sound, after turning off the speakers, it seems to be a problem caused by any process running in the background. I suggest you to open Task Manager and check the process running in the background. If you find any suspicious process just try to put an end to this process.

  You can also try to check the cause to the clean boot.  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: How to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Write to us at the State of the question. We will help you

• Some controls in the container not connected automatically

  Does anyone know why teststand is unable to connect automatically some components of a container?

  Take a look at the image as an attachment: in the configuration of the station, some areas, such as ProberPort to connect automatically, but others, like WetTestHardwareDAQID_1, do not connect.  If you look at the settings, you will see that the two containers (container TestStand and the cluster of VI output) are similar.  So, why the? .

  

  S G

  You get the message as a mapping between elements of cluster and the subproperties of the parameter is not found.  To check this, go to the definition of the type of the variable StationConfiguration.  In the type definition, right-click and select properties from the context menu.  Select the Cluster tab by the way.  In the drop-down list box, select the WetTestHardwareDAQID_1 and see what is the value of the control 'Cluster Label element.  If it is empty, then there are no specified mapping.  Do the same for WetTestHardwareDAQID_2.  To add a mapping, simply enter the element of cluster label that you want to map the property.

  A possible reason for the 'Cluster Label élément' control is empty, it is that someone has made a change to type on these subproperties.  Note that the type column has a button to change the type of the subproperties.  If you click on the button and select a new type, the cluster by the way the information is lost.  It's something we know and will be fixed in a future version of TestStand.

• I am connected but you get the error: "not connected - connections are available.

  I am able to connect to internet with my HP dm1-3025 x netbook (running Windows 7 Home Edition Premium, SSD 240 GB, 6 GB RAM) but will have the following problems.

  • It takes a long time to connect to a wireless network
  • "I get an error message that says: not connected - connections are available.
  • The network bars appear as grey with an orange asterisk on top
  • The Assistant to "Solve problems" is not able to find problems
  • It takes a lot of time to open the "network and sharing Center." Once opened, it says 'Server execution failed '.
  • Windows Media Player and iTunes take a long time to load (approximately 2 minutes or more for each)

  It started about two or three months ago and I lived with her. I went through internet and have not been able to find a solution to this problem. Any ideas or solution would be much appreciated.

  Hello

  I suggest that you want to run system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Once you do the system restore, then I suggest you to download and install the updates from the Download Center. http://www.Microsoft.com/en-in/download/default.aspx

• reset the notification of update of java to run when the admin, not connect standard users

  I am not a Java Forum, but it's half of Java and Microsoft, so I thought I'd post here.

  There is a Java Update, and I get a notification to the user limited on Vista Home. I thought it was just my account because he was demoted from an admin account to the time when I first created it and I turned it back once or two temporarily. However, my mother is there for the day and invited the java update. Limited users cannot install the update, even when you give the UAC admin password.

  However, the notification doesn't seem to be that appears when I log into the admin account, so I can not get this 'thing' being updated. I could do it manually like I did the last two times, but how do I do to make the admin get the notification, not regular users rather than the reverse?
  I know an easy way to customize the controls in Vista HOME Premium beyond what is in the startup folder in the Start Menu-> all programs-> startup startup.

  Subsequently systeminternals program "autoruns" only helps me to understand that the user takes that.

  OK, about 15 seconds after clicking on "transfer" I got the notification pop up on the admin account. It just took longer than on the standard account for some strange reason.

  I still want to know how to exclude users not privileged to see the check because they cannot do anything about this, or at least limit to MY non privileged account that I can always disconnect or use 'switch user' to install these updates.

• HP Pavilion 6835: HP pavilion 6835 Office off the market not connected to the motherboard. Where does it connect?

  The switch turned off-lit is disconnected and is not attached to the motherboard.  Where it connect?

  Hi again aebw,

  Thank you for providing your information!

  According to the Specifications of the product for your desktop computer, the chassis power cables connect to the motherboard along the extreme low Panel shown in the figure below:

  

  Front connectors can be applied using this schema:

  

  And this is the type of connector represented by the figures above:

  1. keyboard lock

  2. LED message

  3. outdoor cable of SMI

  4. speaker connector

  5. ATX power switch

  6. Drive LED

  7. reset switch

  8. power indicator

  You want to make sure that the 'GROUND' chassis connector is plugged #5 and "PWRLED" is plugged #8.

  I hope this helps!

  Best regards

• Error "no network access" on the devices not connected with hotspot Wi - Fi on Windows 8

  Original title: wifi hotspot problem not reciving data connected network - windows 8

  I have windows 8 simple ASP, when I do a WiFi hotspot it activate and connected to the iphone, lumia or tab, but the data are not recived by any device? they don't show error no network access? What is the problem?

  Hello Anwar,

  I wish to gather information to help you better:
  (1) where exactly you receive the error message "no network access? It's on the phone or the computer?
  (2) how do you have enabled connection with devices Wi - Fi hotspot?
  (3) you have problems connecting Wi - Fi hotspot on the computer?

  (4) you receive the same error message with all devices?

  If the issue is with Windows phone, post the same question in the forums Windows Phone for assistance. Check out the link:

  http://answers.Microsoft.com/en-us/WinPhone

  If you encounter this problem only with the computer, then respond with more information so that we could help you better.

  Answer us with more information that would help us resolve this problem more far.

• install on the computer not connected to the internet

  
  I currently have 4 PS and LR4 on my PC.  I would like to upgrade, and the price of the subscription of $9.99 / month is clearly the way to go.  My computer is not online and I have no intention to connect at this time.  It will always be possible to download them to a portable hard drive or a flash drive, then install on my PC, rather than spending it what it would cost to buy CS6?

  Download installation files:

  http://prodesigntools.com/Adobe-CC-2014-direct-download-links.html

  Download updates:

  http://prodesigntools.com/Adobe-CC-2014-updates-links-Windows.html

  Note: It is mandatory to install and connect to the Adobe Creative Cloud application in order to activate your subscription.

  Adobe Creative cloud download the offline installation file:

  Step 1:

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Step 2:

  Click on the link below and download zip file of cloud creative direct Installer:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/Win32/ACCCx3_0_0_74.zip

  Once the downloaded Zip file, right-click on it and select the option extract all and extract the contents and then install the Adobe Creative Cloud application.

  Connect to the Internet for a while, sign in to creative cloud and launch the app and check.

  If the activation is successful. You can go ahead and use the applications without being connected to the Internet.

  Important :

  «Once in every 30 days, you need to connect to the internet for a few minutes to disconnect and connect to creative cloud for re - validate subscription status.»

• Changing the values in drop-down list in the event not return current value

  Hello

  I have a combo that I'm filling using javascript according to the post by Brad here http://blogs.4Point.com/Brad.White/2010/03/populate-a-drop-down-with-a-Web-service-in-a-PD e.html .

  I hooked the change event from the drop-down menu to display the new selection in a separate as text box below

  ApplicationForm.Page1.ddlUsers::change - (FormCalc, client)

  txtSelected.rawValue = ddlUsers.rawValue

  This code works, but shows the previous values (or the last) that has been selected in the drop-down list, but not the current value, which has been selected by the user. I also tried to use selectedIndex rather rawValue on ddlUsers but it has the same behavior. "Commit on" from the drop-down list is set to "SELECT".

  Am I missing something here? How can I get the current value is selected in the drop-down list.

  Thank you

  Marie Pascale

  Hi Carole,

  I didn't look at the blog, but the most appropriate property for use with the change event is xfa.event.newText instead of .rawValue.

  Thus, as the Javascript:

  txtSelected.rawValue = xfa.event.newText;
  

  Hope that helps,

  Niall

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• receive an error message: you are trying to run IE: an application or executable file and then a statement indicating the sytem not can find the environment option

  original title: environment option?

  I am constantly. Any ideas, I'm running vista sp2

  Take a look on...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/sound-familiar-the-system-could-not-find-the/1efd4314-f7cd-40bb-A858-dfaaa61b287e

• installed usb arc touch mouse on award-winning asus laptop and now the touchpad don't work, even with the mouse not connected... Help!

  I go into the properties of the mouse and it has no options for the touchpad... watch it is there, but the mouse touch arc seems to have mastered it.

  Hello

  I understand that you are facing problems with the touchpad on the computer. I understand the inconvenience.

  Let us perform the steps of troubleshooting mentioned in the following article and check if it helps.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Note: Update the drivers for the touchpad from the manufacturer's Web site.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• custom auth: Cancel button dest page should refer back to the menu, not connect

  AP-EXperts...
  
  I have a custom auth routine, which seems to work very well, produced a fine menu tree after authentication. So my link in the menu tree goes to the next page of the app very well (although when it is fully functional, it could also go to pages in other applications in other areas of work).
  
  The problem I have is that the menu links to a page of report/form and report form / seems to work fine, except for the Cancel button. And really, the button is probably done what it should, but I have a redirect to the page 1 which is the menu page, but it ends at 101 which is the login page.
  
  What is happening out there? How can I get the real menu back in place, as expected? There must be a setting that I can put in a cancellation process after to realize this, or some other well-disguised setting. I have no concern that it looks exactly as it did on clicking on the link that went to the / report form.
  
  I hope that you guys get tired of the questions, I'm learning all the right directions.

  There is a session from connection to the menu ID, but there is no postponement of the session ID in the menu option, should it do and maybe you can tell how to include in my link behind the menu? somehow to incorporate the menu session ID in the URL behind my menu option?

  That's the problem. You must specify the id second apex current in the links, otherwise it will create new session.

  I don't know how you have created the menu. However you can get the current session by using the variable binding APP_SESSION .

  Kind regards
  Hari

• Values in the event of connection...

  Hello...
  
  Because one of my problems can be put in this forum (;)) I'm going to one of my other...
  
  The thing is: I had a distinct region on my page to add values to a client (using P3_ID).
  
  All processes are working well, but when I hit the button submit the area to add values, I'm redirected (branched) on the same page, but I don't get the values for the client, I just added...
  
  I do this in my branch:
  
  To present: after treatment (after calculation, Validation and treatment)
  
  Set these points: P3_ID
  
  With these values: & P3_ID.
  
  But I don't get the right result.
  
  Have you guys has an idea?
  
  Thank you!
  
  Douwe Pieter

  Hello

  >
  Element that contains the value of the primary key column: P3_ID
  Primary key column: ID
  >

  If you look a little further down on this page of process, you will see another parameter: 'Return Key in Item. Put P3_ID in there and then try your page.

  Andy

  PS - also check if you have a "reset page" processes running as this could clear all values. If you have this process, its value Never State to disable.

  Published by: ATD on 08-Sep-2009 19:06

• State of the file not updated

  I have a project that was created in an earlier version of RoboHelp. I imported in RoboHelp 7 and now I can't update status of each file (in progress, ready for review, etc.). I right click on a file and edit the status, but the change in status is not displayed. I really need to be able to run reports on the status of project with information. Help! Thank you!

  Welcome to our community, Carla

  Maybe try to close the project in RoboHelp, removing the. CPD file and re - open the project.

  Once you have done this, see if you are able to update the status.

  See you soon... Rick