Windows 7-3 beeps every 30 seconds while logged in (not around the screen of the Bios, not connecting)
After that I connect to Windows 7, I hear 3 rapid beeps every 30 seconds. It does not go far, i.e. it is not a time of presence and repeat indefinitely. I ran Diagnostics through bios and see anything there (no hardware problems). If you cut the speakers it disappears is not an internal part, like the motherboard. Any help would be greatly appreciated.
Hi Mark,
I appreciate the efforts to try to solve the problem. Please write us with the following details.
What is the brand and model of your computer?
As you mentioned that you do not receive this sound, after turning off the speakers, it seems to be a problem caused by any process running in the background. I suggest you to open Task Manager and check the process running in the background. If you find any suspicious process just try to put an end to this process.
You can also try to check the cause to the clean boot. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Please refer to the section: How to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
Write to us at the State of the question. We will help you
Tags: Windows
Similar Questions
-
installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?
System Restore to go back before the show.
I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.
Also note the updates that you install on the computer.
Once you come to know what update is causing the problem, let us know.
Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.
Try a convenience store
Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.
Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.
In the search box, type Troubleshooting, and then click Troubleshooting.
Under system and security, click check for performance issues.
Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.
In the search box, type Troubleshooting, and then click Troubleshooting.
Under system and security, click run maintenance tasks.
08/14 / 1115:46: 45 pm UTC
-
Explorer Windows has stopped working - every 30 seconds.
Hi guys,.
I hope you can help, I thought I would ask here first, but I have a feeling that I may just have to wipe the laptop.
I have an Acer laptop with Vista Home Premium SP2 - 32 bit Sys.
Suddenly, I restarted my laptop and every 30 seconds (ish) I get the dreaded "Windows Explorer has stopped working - find an online solution and restart the program or just restart the program. Whenever I click on restart the program that updates the Windows bar and I can use the start menu and the desktop again. I can't hide this message by moving on the side of the page - this allows me to continue with what is currently open (where the possibility to type this post without having to click on restart explore every 30 seconds.)
If I click on "View problem details" I get this error:
Signature of the problem:
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: umebapuyuqiyuk.dll
Fault Module Version: 7.0.5.8
Timestamp of Module error: 4a60f951
Exception code: c0000005
Exception offset: 00022b 33
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160I tried to locate a file called "umebapuyuqiyuk.dll" but I can't, I don't have any idea what it is.
We hope to help or give me some ideas to try.
Thanks in advance Techies...
Pedro.
Hello
· Since when are you facing this problem?
· Remember to make changes to the computer recently?
Step 1: I suggest you to search for the dll file and rename it to umebapuyuqiyuk.old
Step 2: Run the next Fixit and check if it helps.
Problems with the overall speed of the system and performance
Step 3:Check of the problem in a clean boot state. To do this, follow the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click on start toreduce this imageEx
type msconfig.exe in the Start Search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click restart.
Step 4: Check out this thread that might have a possible solution to your problem.
Explorer Windows stopped working
See also:
-
After the upgrade to windows 10 my DVD player and second HARD drive is not recognized
Hello.
I upgraded my laptop - Acer Aspire 7552 G - 10 Windows Home and now my DVD player and the second HARD disk is not recognized by the system. In Device Manager, the material is indicated under "Unknown devices" and I tried almost everrything and searched for a solution in-house. Hope that there is someone who has a solution to this.
Key of the Windows logo + x
Click on Device ManagerIf the yellow exclamation mark or unknow device is present
Double click on it
Choose the tab "Details".
in the drop-down list, select HardwareIDs
Click the first value and paste here -
Hello
I use HP Compaq Presario CQ62, Windows 7 Ultimate 32 bit OS, 4 GB ram, Intel core i5 processor. It is a portable 4 year old. The battery was changed 8 months ago.
Now, coming to the problem, my laptop will work very well for a few minutes at the start when I turn it on. After some time, the laptop everything becomes so slow it takes forever to work. This occurs when the power is not connected. If I connect power, less than a minute it starts to work faster. But the laptop would become very hot.
This problem started when I updated my iPod. After update iPod, I had this problem even while the charger is plugged. Later, I changed the OS Win7 Home premium genuine to Win 7 Ultimate. (Pirates). I have run the genuine Antivirus, cleaned the registry and everything. The problem persists. Please help me with this topic.
Thanks in advance
-Kere
kaaranjikere,
So I checked the error you are getting, and it is not the battery do not, it is the power which is a failure and that includes everything for the power.
So it is likely that something wrong with your motherboard.
You will need to take the system to someone looking over everything.
I would like to know how everything goes
Nice day.
-
All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.
Now all of a sudden I get a message that the computer cable is not connected. I tried to charge the printer program.
I unplugged and reconnect the cable to the computer, etc.. The system does not work.
I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak
printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.
So, what should I do to fix this? I'm NOT a computer person and I'm confused.
James
Hello
· The updates have been installed on the computer?
You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421
You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045
-
I have windows installed 8.1 and since I did it whenever I turned on the laptop Dell Bluetooth mouse not connect I need to remove it and pair it again.
Before the upgrade to windows windows 8.1 8 it was working properly.
What can I do?
It worked well. The difficult thing was to remove all drivers before installing new.
Thank you
-
For example, Iobit Advanced System Care 6 requires user account control to start, while none of the programs Microsoft Office requires user account control to start, but they are all executables (*.exe). Why?
EXE files may have a small text file embedded in them that controls this behavior (and other). A file called programname.manifest in the same folder can do it too, but one stand-alone exe substitute manifests (vista and later).
Here is one that requires the Admin run and also uses 6 worm of the common controls.
<>
version = "1.0.0.0".
"" processorArchitecture = "*".
name = "DFT".
Type = "win32".
/>
Unicode text editor
<>
Type = "win32".
name = "Microsoft.Windows.Common - controls.
version = "6.0.0.0.
"" processorArchitecture = "*".
publicKeyToken = "6595b64144ccf1df."
"" Language = "*".
/>
<>
Level = "requireAdministrator".
uiAccess = "false".
/>
-
Personally, I have a dual monitor situation, and sometimes I would watch television on an all always doing work on the other. If I maximize the Media Center window it will display full-screen on one monitor but it disables all features on the other. The only way for everyone is stretching as it can on the monitor/display without infringing the workspace of the other monitor, but it is ineffective because it does not display the full screen to a native resolution.
If there is not a current solution for this, then it must be addressed by the engineers of Windows like watch TV on the computer, and multi-monitor configurations are becoming increasingly important in the houses.I appreciate the help. Thank you!Another Windows userAfter you start your support, press alt + tab to exit the Media Center window. Media Center will stay full screen play the media, and you can use the main screen as usual.
This works better if Media Center is on the second screen without the taskbar.
-
When I try to install, I get this message:
"Firefox has stopped working".
A problem caused the blocking of the program works correctly. Windows close program and you warn if a solution is available. »This happens when I select RUN to install Firefox version 9.0.1
I removed the old version because it was crashing whenever I tried to use it and it wouldn't let me update with the new.
I HATE IE and need my back Firefox - I'm dead in the water for a job without him.
You check the Firefox (C:\Program Files\Mozilla Firefox\) program folder disappeared completely?
-
Windows wants to install 6 updates every time that I log out or put the computer in mode "Eve"
I can't stop or have food options on. I expect the updates to install. It is said that they have installed and the next time I start there they are.
Hi Happygrammy,
Welcome to the Windows Vista answers Forum!
This could happen if the update that you are trying to install are damaged during the process. To prevent this all the time you need to maybe uninstall the updates, and install them one at a time.
To do this, you will need to make a list updates that are the cause of the problem, then go to install update history and uninstall them manually. Then download these updates and install them in clean boot mode.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Steps to put the system in clean boot include:
1 log on to the computer using an account with administrator rights
2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue
3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all
Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility
For more information about the clean boot, follow the below given link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart
You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058
These steps should solve the problem, give it a try and check if you are able to perform windows updates.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Software loaded, computer rebooted, selected activate over the internet (internet works), entry of information required (US) and subject - receipt cannot connect to the Microsoft activation server. tried to activiate telephone (not then given telephone number I looked on internet) called tech support and they can not activate by phone and referred me to this site.
original title: unable to activiate microsoft xp professionalHow to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=usMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxOnce Windows activated / Genuine Advantage Notifications:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
(This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)J W Stuart: Http://www.pagestart.com
-
I have a Window XP Acer Aspire 10 inch notebook that I can not connect
I also have a problem. Although several times I tried to connect to my password and simple said that it was not the right password, but... I have a very simple password and yet it had been almost a month now that I can't connect it. I tried to start and keep pressing f8 maybe, I thought that I'd be able to start any chance I could not get in. Very very frustrated I am indeed. Is there another way. I tried administrator but faild then I tried my name and it said incorrect a few dozen times. Help, please. Thank you.
Hi Rudy raffin,.
I suggest you to consult the links below and the mentioned test and verify the results:
How to connect to your Windows XP-based computer if you forget your password or if your password expires
http://support.Microsoft.com/kb/321305
In addition, see the article for more information about the Microsoft policy on forgotten passwords
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126
Hope this information helps.
-
I used the function to «return to the image of factoy» Updated the drivers of HP. Click on Windows Update & he wanted updates for the last 30 hours. Any thoughts?
HP Pavilion Notebook PC g6
SN 5CG2190FP0
PN B7S85UA #ABA
500 GB
4 GB OF RAM
Start by following the instructions in this discussion:
-
BlackBerry smartphone White screen while mobile is activated and the BB Desktop connection
My bb8900 shows white screen when I yook it my pocket it shows connected with BB Desktop I have updated its software as well but question remains the same only white screen shows the mobile please help
Hey Mari_43,
Welcome to the community of BlackBerry Support Forums.
Thanks for the question.
Since the white screen is always occurring after a reload of the device software, I suggest you contact your provider network of repair options.
Let me know if you have any other questions.
See you soon.
Maybe you are looking for
-
Is firefox factory locked phones?
I've been good an Alcatel one touch fire running Firefox os 1.3 so I want to know is your phones are locked in the factory?
-
Satellite M40 (PSM40A) - I had to reinstall XP 3 times
I think my memory is dying but I m not sure and I m not an expert in computer science, but in any case here is what happened. In the last three months, that I had to reinstall Windows XP 3 times.The first time, the problem started to happen was a day
-
where can I download xampp 1.8.3
I'm trying to resurrect a web server on Snow Leopard. Anyone know where I can get XAMPP version 1.8.3?
-
VN7 792 G Black Edition with windows 7
Hello I managed to install windows 7 on VN7 792 G Black Edition. The last thing that what remains is healthy. Its Realtek ALC255 card is not recognized, but it is detected on the PCI bus. I tried to manually add this driver (with success), but the er
-
What are the causes fonts show only as a bitmap in Photoshop CC 2015?
I have Photoshop CC 2015 update. My fonts do not appear correctly. They are all failing to a wheelbase of pixelation. I can try to correct this please?Karin