Static ip configuration of the server. Is this possible?

Similar Questions

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Unable to connect to the server at this time!

  Hey guys,.

  We are experiencing a problem with our multifolio app. We continue to get this message when downloading folios: unable to connect to the server at this time.

  Now, normally we put this to a bad internet connection.

  This is not the case.

  We constantly download problems in this app. At the beginning it is seems to be very well; the blue indicator bar Scrolls merrily along until suddenly it stops and goes back initially, continues still for a bit and then, BOOM! Unable to connect to the server at this time!

  The funny thing is when I go to the Adobe Content Viewer that doesn't happen. Same files in the same place, but with a different application. It may take some time, but it does not stop and finally finished the job. I get the download.

  The name of the application is Reykjavik Shopping and City Guide.

  Any thoughts? This is a serious problem and could impact our business in a bad position.

  Thank you

  Yngvi

  Please contact support for assistance with this enterprise. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Error "unable to connect to the server at this time."

  My customer has an application direct download (21/02/14) Friday failed because. The application using direct payment to give to users access...

  Any free folios in the app work very well, since Friday afternoon, no right folios were able to be downloaded, but they still apear when a sign right user in the application. When a user tries to download a Folio, they get a message that says "cannot connect to the server at this time, please try again later."

  The customer control their system of law and says that there have been no changes to the system since the app became operational two weeks ago.

  It seems that there is a connection problem with the connection to the server of accomplishment, but I don't know how to help the client at this point. Any help would be appreciated.

  -Scott

  You must contact Support Gold support. They have the tools and the knowledge to be able to debug it.

  Neil

• Static IP address on the server 2008R2 disconnecting Internet

  Please help with a static IP configuration on VMware.

  I would like to configure Active Directory on VMware with FULL INTERNET AND IP ADDRESS, please help.

  Scenarios

  I use VMware on Windows 8.1 10 and that's what strikes me:

  1. After installing server 2008R2 on VMware and the activation of the "Connection NAT" network card, I had full access to the internet.
  2. 1920168.5.2 to server static IP address assignment disconnect internet.
  3. Add more network on the server to reconnect to the internet but removes the static IP address.
  4. Even the bridge two network cards, I still get internet access.
  5. Active directory cannot be installed on a dynamic IP address
  6. I connect using wireless (my cell phone as a modem).

  Your help will be greatly appreciated

  After following your instructions, I discovered that VM DNS is 192.168.111.2. Both the DNS and gateway uses the same IP address, DNS is indeed the gateway to NAT. la... 111... changes when you reset the VM machine. Also, I discovered that the DHCP of the VM is 192.168.111.128 as you put it. Now place the Client Server on the same network of VM IP, thus, take the given dynamic IP 192.168.111.128/129/130/131 etc, make it static. Assigning 192.168.111.2 as gateway and DNS, provides access to the internet. However, after configuring Active directory member servers will not find the domain controller uses the DNS of VM.  Instead, insert the IP of the VM DNS as secondary preferred over the IP of the DNS server (for example, DC1, DC2 mem1 etc.) in the preferred DNS. Then... VOALA... Is set with full internet access.

  It was a challenge to the calm, but I give you the thumbs up for your lead. You are the best.

• Configuration of the server. the JDeveloper + BI publisher App support

  We have a project to build an application using JDeveloper and BI publisher for reporting purposes.
  System must support as users of 20-35.
  App must be accessible via the internet from regular PC or laptop "in this phase, pahase next will be for Ipads... mobile devices."
  We want to host the application in our own server.
  If we ask ourselves what should be the right approach to take on the configuration of the servers.
  something like (a server for a database, a server for BI...) and also the oracle products do we need to install to be runnig Jdev and BI
  
  I heard also that we should wait for a new version of Jdeveloper due Jdeveloper and BI will work together in a simple way.
  
  Thanks a lot for your help.

  Usually, you have a server for DB and one for parts of Fusion Middleware (WebLogic for ADF and pieces of BI Publisher).
  The exact specifications of the server depends on the specificity of your applications, how it is written and how it is used - the best way to determine those who are really test your application under load.
  (you can use Oracle Application testing Suite or JMeter to parts of the ADF).

  I would say that you go with the 11.1.1.7 for JDeveloper and BI Publisher version.

• Web interface error - could not contact the server at this time

  Hey all,.

  Immediately after completing the deployment of the new 2.1 UM I'm running an obstacle when connecting to the web interface. After authentication, with the web interface, I get the following when you select my user type (service provider or aggregator - anyone):

  

  I redeployed the VAPP twice is not a transient deployment problem. Networking seems fine - I can ping from areas on the Internet from the SUSE console. Not sure that this message refers on the 'server' is in contact with. It is deployed on ESXi 4.1 in a cluster vCentre vswitches standard, nothing special.

  Any ideas?

  Kind regards

  Daniel Whittaker.

  Daniel,

  When you get the message after installation, click OK and then refresh the page or click F5.  The message should appear is no longer.

  Kind regards

  David

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• Upload to FTP "Folder on the server", why this is pointing to my URL more?

  Made a few updates to the site and now I am unable to upload to FTP as I did when I launched the site. Hosted on host gator who sees no problem with hosting

  If the FTP server name includes the "ftp: / /" prefix, remove it. It was never necessary, and in the current version of 2014.2, it will prevent the connection.

• grouping of the datagrid (is this possible?) headers.

  Hello

  I need to make a layout in a datagrid (or control advanceddatagrid) that I need to display headers and columns like this:

  example:

  Customer |             Name of the vendor

  Code |   Description |   Code |   Description

  Where the Code and the Description are my columns, but how I have 2 columns with the same name I need to bundle it with a label.

  I could use columns as client Code, client Description... but I think with the group in the headers give a better experience for users.

  any help will be appreciated.

  Thank you

  André.

  You can get what you want by AdvancedDatagridColumnGroup.

  Please see

  http://www.onflex.org/Ted/2007/06/Flex-3-Wednesday-components-and-SDK.php

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=advdatagrid_02.html

  Thank you.

• I am in muse and I split my horizontal menu to put an image in the middle two half of the. Is this possible? I'm on PC.

  Im trying to put an image in the middle of my menu but can't figure out how. Can someone please?

  You create two separate menus and place the image inbetween.

  Mylenium

• Cannot remove HARD disk configuration PERC 6i with use of the SAS drives foreign. Existing data are not important. Scratch reloading to redeploy the server.

  Dell Poweredge 2950 III with serial number note from the Admin: have the label removed according to the TOU > receipt readers traded since an identical poweredge almost eliminated. In the configuration of the PERC controller 0 6i utility, disk groups show as foreigners. Messages following the procedure to import the configuration, then remove before was not effective. The prior configuration appears in the menu.

  I would like to simply clean configurations of VD for the readers and the controller. After it is deleted then next step is to set up a configuration I want. My new Setup is not relevant for this post. The goal and the only question is how to clear existing shared disk configurations.

  VD0 clear addition to figure 2 SAS PD/hard drives as virtual disk unique. RAID levels 0, status is offline, SMART status not = no error, County VD = 1, PD = 2 count, operation = none

  Is a similar to VD0 VD1

  other berries are currently empty.

  For initial troubleshooting I have removed all the HARD drive except a single disk on the server. This disc shows also as stranger.

  In the PERC 6i config utility:

  VD MGMT doesn't show CONTROLLER0 - no configuration is present. Choice of the F2 are Config. Foreign config based on availability. (Create new VD and manage preserved Cache are greyed out) Right pane of the screen indicates "foreign Config present, controller prop.: DG = 0, County VD count = 0, County of PD = 1".

  PD MGMT shows only the formatted Mo 139 K SAS single, foreign = State, SMART status not is no mistake, operation = none

  VIEW FOREIGNERS shows DG0 = foreign, Virtual disk 255 with DG count = 1. County of VD = 1, County of PD = 1

  I installed 3 of the disks individually rotating as a single HARD drive with similar results.

  WITH 2 HDD SAS installed only difference is VD Mgmt shows County DG = 0, County VD = 0, County of PD = 2.   View foreign shows VD255 prop: Raid 0, Raid = foreign status, size = na, operation = none. | Disk prop group. : VD Count = 1, County of PD = 2, Ded HS = 0 (because it does not exist).

  Thanks Chris. Problem is solved. I would like to Flash the firmware as precautionary measure? Still confused why initial in the VD Mgmt tab procedure has failed.

  All readers of Restore tab PD-ready state.

  -Dave

• On Thunderbird 24.6, I can't say to leave messages on the server when I download or delete. Why? Where is this area which was in older versions?

  The messages seem to leave the server after I the download or remove them and they are not visible to the user of the joint account. There was to be a check on previous versions of TBird to leave messages on the server, it has now disappeared, or I can't find it because it's been moved.

  This option is at Tools-Account Settings-ServerSettings but is available only if the account is set up as a pop account. Since IMAP accounts are all server based messages are still on the server, and this option is not necessary.

• Always get "a referral was returned by the server.

  Whenever I have download a new program and try to install it, I get the message "a referral was returned by the server. This includes the Nvidia Win7 drivers. I tried compatibility mode, but still not this error message!

  I discovered what particular setting that was causing this issue for me; in Local Group Policy Editor under "Computer Configuration > Windows settings > settings > political premises > Security Security Options" user account control: only elevate executables that are signed and validated > set to "Off" > restart computer/Log out then on / refresh desktop; Problem solved.

  I hope this helps some of you out there!

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick