status: \boot\bcd 0xc000000f

Similar Questions

• Error \boot\bcd 0xc000000f and windows vista recovery status do not work

  Well, I have HP Compaq Presario v3751AU and he could not start today and in \boot\bcd 0xc000000f error.

  I try to put in the recovery disc, it gave me the message "" press any key to start from the CD or DVD. "" When I do this, all that appears is a black screen that says "Windows loading files...". "with a white loading bar in the background, but it is not actually boot from the disc then. the mouse pointer is displayed on the background green-vista, but there is nothing I can click, such as the 'next' button or even the language selection button. He continues to freeze on the vacuum-vista-green background.

  can someone help me?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• error \Boot\Bcd 0xc000000f on vista

  I've updated my drivers last night and this error message came when I started re, \boot\bcd 0xc000000f

  Please put in your cd of windows and repair...

  so I put in my cd and it appears new, no option to boot from the disc, checked the bios cd is first starting, still no option to boot from the disc, I get my screen/post of the bios, then black screen then this message. What can I do?

  Hi calus2404,

  1. How have you installed Windows Vista? Is it pre-installed?

  2. using Windows Vista CD or DVD?

  If you can organize an another DVD of Windows Vista, then use it and check if you can load from disk.

  If you can load, then try the steps in the link below to perform a system restore or startup repair and check to see if you can boot into normal mode.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)

  HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f

  How can I solve it please, I have windows won start t all hekp would be much appreciated.

  Kind regards

  Yvouille

  Hello

  The following assumes that you are running Windows 7.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• FILE: \BOOT \BCD - status 0xc000000f

  OK, Vista running and get the error on the startup file: \boot \BCD with status 0xc000000f

  I know not how to solve this problem using the diskette provided by dell and I see a lot of people have the same problem.

  Microsoft gave instructions on how to solve this problem, but they did not address the cause,

  Everything works fine until there is an another update of Vista then it does again?

  Why is this and how can it be solved for good?

  answered in other threads

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1920f1c8-A1D3-416c-B03B-ca998f6cec7a
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/3df8c662-2076-4d1a-8E3E-7fbabc800445 Rob - bicycle - Mark Twain said it is good.

• FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error

  I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.

  Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.
  I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable.  Tried the disc start recovery and orders bootrec quick functions.
  Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?

  Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Problem to start Windows 7 (file \boot\bcd; status 0xc0000098)

  Hello

  Who can help me with this problem. Since a couple of days, I get a black screen with the following message

  File: \Boot\BCD

  status: 0xc0000098

  Info: The windows boot configuration data file does not contaitn not an operating system entry validate.

  someone has an idea to solve this problem

  I don't have a windows installation disc

  Thanks in advance

  Greet the Berry

  > I don't have a windows installation disc

  In case you are unable to start Notepad using the F8 key, you must download the BartPE (windows live bootable CD/DVD)
  http://www.nu2.nu/pebuilder/

  You could create bootable CD and could start the unit in order to repair the Boot Configuration data (BCD)
  I think you should be able to repair the Windows Bootmanager using the command: bootrec /rebuildbcd + +.

• Status of Boot\BCD 0xc0000225. Error

  I write because I also have the same problem with my laptop as U. I have a laptop Hp G6 and I just shrunk my C drive after a take-over of the factory... and later I can´t get in my laptop because the error: file: \Boot\BCD 0xc0000225 status. Please could you help me with this? How did solve you your problem. Thank you very much.
  
  Please answer me as soon as possible

  Press F8 at startup to appear the WinRE and select "repair your computer".  On the menu next, open a command prompt and type in the following:

  Bootrec /rebuildbcd

  and press ENTER.  If you are asked about the installations of windows, select 'Y' or 'A '.  After that, you should be able to boot into windows.

• When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

  Original title: 0x000014c File: \Boot\BCD

  I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

  Hi Maddy,

  This problem may occur if the Windows startup files are damaged or missing.

  If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

  If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

  If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

  Hope the helps of information.

• WINDOWS does not start \EFI\MICROSOFT\BOOT\BCD status 0 x 0000185

  I just got a new laptop and I love it, but I went to restart it and the samsung logo stay up, and finally, it throws an error saying

  Windows doesn't load due to hardware or software upgrade recent...
  file \EFI\MICROSOFT\BOOT\BCD
  status 0c 0000185
  Info configuration of your pc startup data is missing or contains errors
  the computer tells me to insert the windows disc 8
  I don't have a windows disc 8, I got the laptop a month ago but it is pre-loaded with windows 8... help a brother out!

  Curiously, I tried all the patches when I got this error efi unawares. I have a dual boot using win 7 as my first and win 10 on another drive.

  I downloaded a Boot Manager after you saw that somehow the drive letter had changed when I decided to check the start state. I don't have this problem before the last update.

  It changed back and everything was fine.

• Pavilion G6 does not (Win7). Boot\BCD error, status 0xc0000225

  Hello

  My 4 month old Pavilion G6-2155sf cannot start. Normal start-up it is just stuck on the windows logo.

  If I press F11 I get this message:

  "Unable to start Windows. A recent hardware or software change might be the
  cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or your computer
  manufacturer for assistance.

  File: \Boot\BCD

  Situation: 0xc0000225

  Info: an error occurred trying to read the boot configuration data. »

  Also, after pressing F2, I did a quick test drive and I got this result:
  DST short: FAILURE

  I'm off to my memory of end of study, internship next week and this computer is my tool, please help me

  Thank you for your time,

  Guillaume Belouch

  PS: No modification/installation of software or material or anything like that was made last week. Also computer had no access to the internet for a week, so I doubt that it can be a virus.

  P/N: B7G02EA #ABF

  S/N: {removed privacy}

  Windows 7

  Hello

  Unfortunately it would look as the volume is indeed corrupt, which coupled with the error of the DST, would tend to confirm that the drive has indeed failed.

  Now my best suggestion would be to contact HP immediately and get the HARD drive replaced under warranty - make sure you always have a set of recovery discs/media to reinstall the operating system on the new drive, if you have not, you should be able to order it at the same time.

  Kind regards

  DP - K

• Windows could not start. Status: 0xc000225. File: \Boot\BCD

  Pavilion dv7 - 6187cl Entertainment PC

  Hello

  The following assumes that you are using Windows 7

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the CD into the laptop and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Vista Start Up problem Boot\BCD error

  Husband has Vista, and when he's trying to start his computer he gets the following error message:

  File: \Boot\BCD
  Status: 0xc0000034
  Info: The Windows Boot Configuration data file is missing required information

  I have the same make and model laptop and I have no problem.

  Any suggestions please.

  This knowledge base document Microsoft might help you:

  + Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information" +. "
  http://support.Microsoft.com/kb/927391

  According to this doc the this error occurs when two
  The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  The Boot\BCD file on the active partition is damaged or missing.

  See how to solve this problem.

  Good bye

• Satellite L300-147 - windows fails to load \Boot\BCD

  When I turn on my laptop windows will not load. I do not have installation discs and I can not load in safe mode or anything. The file is \Boot\BCD status is 0x000000f. The info is "an error occurred trying to read the boot configuration data.

  Can you help me please?
  Thank you

  You can enter advanced startup settings with F8 at the start?
  Is option fix my computer available?