Status of dependencies

Similar Questions

• HP Deskjet 2540: Deskjet 2540 status offline

  I have a deskjet 2540/scanner printer, which shows in offline mode in each program with the exception of hp printer control app.

  It works perfect in this application in windows 8.

  I have all the updates made since 08/07/15 HP

  I have all the updates of windows 8 from 08/07/15

  I can't have the printer to print from the doctor printing and scanning

  I've uninstalled and reinstalled a few times the same thing

  I have the same problem with the USB cable.

  I also tried to install with the USB cable, same thing

  I would be extremely grateful for any help on this irritating problem

  P.S., the problem started all of a sudden. before this problem, windows and hp programming was not updated in forever because I felt "if its not broken don't fix it." Now, I have a problem

  Hello @G_A_M_Mc1,

  Welcome to the Forums of HP Support!

  I understand that you are having problems in offline mode when printing from your computer in Windows 8 for the all-in-one printer HP Deskjet 2540. I would like to help you today with this printing problem. Thank you for all the troubleshooting that you tried before reaching out for support, including. To be honest, because this problem occurs via the connection of the USB cable and the connection network, I don't think the problem you are experiencing is related to connectivity. Instead, there is probably a driver conflict between the printer and the computer, or even a problem print spooler occurring on the Windows computer. Can I please you follow the steps below to resolve this issue.

  Step 1: Run Microsoft fix:

  This fix is for network printers. I understand that your printing problem occurs via the USB connection or network connections. However, it is worth trying this fix.

  Microsoft has released a hotfix to correct printing problems in Windows 8 and Windows 8.1 operating systems. Printing problems seem to affect printers on a network, regardless of the brand or model, and there is a conflict with the WSD Windows Network Port. Please click here to download and run a Microsoft Fix it Tool. "Once the site opens for the fix, please click on the button 'available hotfix download". Please follow the prompts on the screen to install the hotfix. Once the fix has been loaded please try again to print. If the printing problem continues to occur, proceed to the next step.

  Step 2: Check the status of print spooler:

  The print spooler is the printing system integrated with your Windows PC. Printers rely on the Print Spooler Service running in order to print correctly. Therefore, I will ask you to check the print spooler service to ensure that it is in good working condition.

  1. Open your screen to Start by clicking the Windows button on the lower left side of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. In the start screen, type run
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here

  Step 3: Check the print spooler folder:

  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder

  Step 4: Start Spooler and check the dependencies:

  1 open the Services window we previously minimized

  2. click on print spooler to highlight

  3. click on Start in the upper left corner

  4. If you get an error message please take note of this

  5. If the print spooler starts successfully you will see "stop and restart" as your options at the top left

  6. then, double left click on print spooler. A print spooler properties window is now open. Click the connection tab at the top. Can you please make sure that it is set to Local System account and make sure that the check box is selected to "Allow the Service to interact with desktop".

  7. then click on the tab "dependencies". Please check which dependencies are listed. I need to know this if the problem persists when you have completed the steps I provide in this post.

  

  8. click on apply and OK for any changes that you have made the log tab. Close the Services window.

  Once the spooler has been verified and has started, please test printing. If the printing problem continues to occur, proceed to the last step to load another driver on your machine and test print.

  Step 5: Load driver replacing:

  1. Open your screen to Start by selecting the Windows key bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type devices and printers. Click on devices and printers to launch the window
  3. Under devices and Printers window, right-click on your all-in-one HP Deskjet 2540 and left click on printer properties.
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  10. Under the printer properties window, select 'Apply' but don't hit OK
  11. Select the general tab
  12. Rename your printer all-in-one HP Deskjet 2540
      
  13. Click OK
  14. Finally, right click on your all-in-one HP Deskjet 2540 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu of 'Normal' for the quality of printing on the bottom right and change its normal fast
  17. Press apply and OK

  Once the other driver has been installed successfully, please test printing.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• People scan status

  On my MBP, I see the the following information when I click on people in the sidebar of Photos.

  

  However, when I click on the people in my 27 iMac it goes always directly to page list all the people who exist in the data of my people.

  Is it possible to get the status information shown above for the MBP?

  If there is no statue, then the analysis is completed on this system

  LN

• Sierra, stuck in the 'Downloaded' status

  The Sierra dmg has failed with an error "invalid checksum". I would like to re - download the file to see if it has been altered during the download - but the app store has the gray Sierra drop-down selection in a status of "downloaded".

  How can I redownload the dmg file and try again?

  Finder > Applications

  Don't you see macOS Installer Sierra?

  If so, place the macOS Installer Sierra in the trash and try to download it again.

• Disappears from the status bar

  When I'm away from mobile data my status bar disappears.

  What mobile data?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• Is it possible to add a mute icon on the status bar

  I understand the desire to keep the clean status bar, but a mute icon would be really useful for many users. This is my first iPhone and I had a LIFEPROOF case to protect it. The problem is that this case does not allow me to determine the setting of the switch ring looking from the side of the phone. The only way that I can know if the ringer is on is to flip the switch back and forth while watching the status of ringtone icon screen.

  Yyou possibly tell there is a problem with the case, but I bet it's true for most cases, in particular the raincoat water ones.  If Apple does not support to add even an icon to the status bar at least Apple could put on display today ' hui / Notifications of menu drop-down.

  You can provide feedback to Apple here, http://www.apple.com/feedback. This is a user to user support forum, and Apple is not here involved. It is the only way for them to know you want to see a change.

• check the status of the guarantee

  I don't know the date of purchase my Iphone. How can I check my warranty status?

  https://checkcoverage.Apple.com/

• iCloud Apple music status is incorrect

  I have about 50 + songs that tend to sync my iPod Classic because they (wrongly) show Apple music iCloud status.

  The songs are all ripped to my own CD or LP/EPs and imported music in iTunes.

  I use two Match iTunes and am a subscriber of Apple's music. My version of iTunes is 12.4.3.1.

  Old bandages show removing the download (song) and the new download should be properly thru, but a test of several different songs give the same incorrect state music Apple iCloud.

  Someone at - there a way to fix this?

  Thank you

  David

  Yes, I had this problem also. I contacted apple support and their engineers reset my library to an end and it solved the problem, but there are a few songs that could not be reset, in which case Apple gave me the credit to buy the song again, and that fixed the issue

  bbEst thing to do is to contact Apple support speak to a Manager or consultant and explain to them and you want to reset your library. You may need to disable iCloud music library while reset happens that it worked for me, it will be useful

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• What happened to the download status bar in Firefox 42?

  I can't say when a download is finished, what happened to the status bar in Firefox version 42?

  Type of topic: customization< enter > in the address bar.
  In the new window, look for the icon. When you find it, press and hold
  the left button on it and move it to where you want it to be.
  You can move the icons you want here, but
  some icons are locked in place.

  Also, there is a default button in the Middle at the bottom.

  Photo 1, that's what it looks like in the window customize.
  Photo 2, this is what it looks like on the toolbar.

• How to follow the direction of Adobe 'Flash uninstall"to check the Firefox browser for the 'status' of Adobe Flash? --

  I downloaded Adobe uninstall (for Mac, OS x 10.4ff) and he ran to get rid of old shards of Adobe Flash, be very careful to follow the Adobe provided through their Web site. The last thing they ask you to do is to "Check that the uninstall is complete", by restarting your computer and then open your browser and check the status of the Flash Player. BUT it seems not to be a way to check the State of Adobe Flash Player on current versions of browsers Mozilla product.
  How can I check that the old version of 'Flash Player' is really gone?

  Firefox 41.0.2 on Mac OS X 10.8.5

  edited by e-mail from the public and robots to spammers

  See also the "tools > Modules > Plugins" (topic: addons) page and all: plugins page.

• Why Techtool and disk utility reports different SMART status?

  my laptop sometimes starts the sign of prohibition, and some start successfully.

  I guess it's the HARD drive, that this assumption holds up to what otherwise. All the Apple hardware test has passed including the extended version.

  the image below illustrates the tool of technology S.M.A.R.T status report is a failure because of "current pending sector count", while the State SMART Disk utility report is checked.

  who should I believe? or should I suspect the flex cable?

  

  

  Hi chemotkbiloIn, first of all save all your data now. I would tend to believe TT. But you don't have to guess, the best way to find out would be to bring your Mac to any Apple store for a free evaluation.

• extend the status bar

  the Manager of the activity is not real-time enough, the status bar I cannot get to expand.
  imap accounts migration from one server to another, really needs to see the overall situation in real-time with what thunderbird done and finished. IM open to the addition of an addon, but have not found a good fit for this challenge.

  Try mailtweak, with the option "Cache status message" .

  If it does not immediately install, install first of all this add-on .

  Alternative download site: http://mirrors.ibiblio.org/mozdev.org/mailtweak/

• 'Research' on the status bar

  I used iphone 5s.

  Today, I get my phone 'search' in the bar shows.

  I need to change my SIM card, but still in the 'search' in the status bar.

  can be any someone help me...

  Thank you...

  Hello

  Follow the instructions here:

  If you cannot connect to a cellular network or cellular data - Apple Support