step and repeat equivalent

Similar Questions

• Step and repeat the problem of quality (Alt + Shift + Ctrl + T)

  Hello

  I have a weird problem when I do the step "and repeat" - all copies I have lower than his previous quality... Look at the second picture where the arrow tip, it has a thin line around the darker areas

  

  Here is an example of step and repeat, you can see the first (1) original copy and the last (12), which has much less quality.

  

  Happy to hear any ideas

  It is as expected because the transformation causes the resampling and degradation, accumulate.

  Try to use dynamic objects instead of pixelated straight layers.

• Step and repeat with a mail merge

  I have a label that implies a fair bit of design. I want to merge, the label so it has 10 rows and 3 columns.

  I know how to do with 1 label (that is, if I want 30 versions of the same thing) by step and repeat.

  However, I do not understand how I can step-and-repeat a label that merged content into it.

  Any help would be appreciated.

  Most likely, you have something else on the page or a large frame or something that makes it impossible to duplicate - EVERYTHING on the page is repeated many times that can hold using the spacing that you specify.

  Better, in my opinion is to draw a picture (no outline or background) the size of a label and not the full available within this framework, it must be able to set spacing to 0. In addition, there is a bug in CS5/5.5, which causes an incorrect merging if preview you before you actually run the merger. If you feel you must preview, cancel before the merger.

• How step and repeat objects

  I searched google and have not found how to do this... I can do in Indesign...

  Object > transform > transform again

  From time to time the transformation effect is a better option.

• Can not and repeat in Illustrator CC

  Hello. Since downloading the latest updates to Illustrator CC, I have been unable to use "command D" step and repeat for several objects.

  Can I copy and paste using shortcuts and also use ' object > transform ' but when I use "command D" is not just step and repeat, the duplicate form does not move.

  Any thoughts?

  Thanks in advance.

  Is object > transform > transform again the value actually the shortcut command-D?

• How do you use the step and resume for 10 indesign pages

  Hello

  I have a record for a mailing label. I have successfully used the step and repeat to create 2 columns and 8 rows for a document or a page. How to create 2 columns and 8 rows to say 10 pages with step and repeat? What you have to do with the pages?

  Thanks in advance

  You're simply trying to get additional copies of the same label? You don't want to do several pages to do, just print x pages.

  This looks like the same project of the other day. You really need to be clear about what you're doing: you said you wanted 50 copies of the same label and I told you not to worry about merging data, but maybe what you really meant you wanted pages full of the same label, but many different labels in the file. It IS a project of data merge, but you still would be implemented with stepa and repeat the process to put a series of placeholders in each position of the label, but you do only one page in the merge template. Merge all your records, one record per page, then print as many copies of the file as that required for the number of labels you need.

• How to perform several steps and the display of charts/indicators without repeating the same code for each entry (of the dozens of entries)?

  I have to repeat the same steps and display in the Panel before (graphic fft and other indicators).

  Do I need to repeat the same code for each entry/channel? I already have too many channels and whenever I change a measure (and code) for an input/channel, I have to repeat the changes to all the other entries.

  Thank you

  
  

• Uncheck show desktop icons can I him repeat these steps, and then select Show the desktop icons are the same icons that I had before reappearing?

  If a right click the office click on view, then uncheck show desktop icons and restart or turn off and turn on my computer can I repeat these steps, and then show the desktop icons check will be the same icons that I had before reappearing!

  Yes. This control simply allows you to show or hide. It does not change the contents of the desktop (C:\Users\\Desktop) user-defined folder. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to undo a step and go again StepIndex

  Hello

  I'm evaluating NI TestStand to determine if it meets the needs of a custom application.  The application must include a basic repeating sequence of activation outputs and verification of the response of the system (inputs).  This part seems to be a good target for NI TestStand.  However, so are the execution of these basic IO operations, the system must be capable of monitoring asynchronous.  These asynchronous monitors should occur in several fundamental stages of IO and must also be handled immediately in case of failure.  For example, to control the power supply for 10 steps and immediately stop the test if the supply voltage is insufficient.

  I'll use the supply voltage in the example for the rest of this discussion, but the final solution will have to implement several "monitors".  The condition of 'failure' of the supply voltage is when it falls below a certain limit, and the results of the tests are no longer valid.

  I was able to manage the execution of the MainSequence endpoint using a sous-suite that reads power and calls the Execution.TerminateAll () method when the supply voltage is lower than the limits (monitor).

  I'm now trying to cancel the current step and move on to a new StepIndex (in the MainSequence) after a failure of power supply (detected by a subsequence in a run in parallel).  The new StepIndex can contain the code defined by the user that will manage the error or reach a place that needs more power supply IT.  I hit a roadblock with the implementation.

  I can't find any information on how to cancel a step and proceed to the next step or step defined by the user.

  The only thread I found was here, but does not provide information on how to do what the Application engineer chosen to have a private conversation

  Someone at - it advice?

  There are probably a few different ways that you can implement the behaviour sought. I think with the information that you have provided, continuing to use Execution.Terminate () and take it one step further to implement a monitor in your termination process may be the most appropriate option.

  The monitor of termination is generally used in a code module that performs multiple iterations in a loop. It checks to see if the user has launched a cancellation outside the code module. If your code module is correctly designed, when he learned of the termination monitor that a dismissal has been hired, the loop will be terminated and the remaining unnecessary code will be ignored (I say useless because there might be some cleanup code in your code module that you want to run before leaving the code module). In your case, if you're not perform loops, you can check for a cancellation at several points in your code module. (Note that by default the TestStand waiting step type implements a monitor of termination and will honor a termination of employment)

  Once the code module ends, you can check whether or not a termination was launched at a step after the engine callback and set the desired behavior occurs is it a. (for example, you can cancel the termination and specify what you want to go, be it a call sequence or perform some test steps).

  If you decide to follow this approach, you must ensure that a monitor of termination is implemented in your code modules to appropriate, strategic places. You will also need to be aware that by substituting the engine post-etape callback, there is some added overhead and you will encounter a slightly stricken performance as it will sound at each stage that runs.

  This sounds like a viable solution? I hope this helps.

• HP ENVY Phoeniix h9t C1V11AV #ABA keyboard and repeat keys

  Firsttt off m system is remove etc.et of the anananananany virus that I change batterrrrriiiiiis

  Latttley assssss, said bymymymymymymy typing my keyboard repeats and repeats. and iss makes me crazy.

  Alll drivers are up-to-date.

  All ideas

  Hi ssgmike,

  I understand that you have a problem with your keyboard repeat letters. I have included the "Wired Keyboard troubleshooting (Windows 8)" document this will lead you through various steps to troubleshoot and make sure that the settings are correct. So have you tried another keyboard?

  Please let me know if that fixes the problem, thanks.

• How to block a Web site from opening spontaneously and repeatedly in my Google Chrome?

  I received an email from a friend of a yahoo.com address. She asked me to open a site called Diario de America. But it happened to be a forwarded message from another person. I foolishly opened it and only then noticed that it was spam. I have blocked the address of my friend and asked her to close the account, because all his contacts had received the same message.

  
  
  Unfortunately, this page "Diario de América" spontaneously and repeatedly sometimes opens in my google chrome.
  
  
  How to block the site? Please, answer me!

  Hello

  ·         Are you experiencing a similar problem in Internet explore?

  Since you are faced with the question in Google Chrome, it would be better to post your query to the site of Support of Google Chrome for better assistance.

  http://support.Google.com/chrome/?hl=en

  If you are facing the issue in Internet explorer, and then follow the steps in this link to fix the problem:

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• Black screen startup melody and repeated mac.

  Hello

  I have an iMac 27' with 8 GB of ram i7 processor and model 2010 with operating system software most recent.

  Two weeks ago, when I press start button I listen to the melody of classic mac startup will be repeated and the screen is still black. Nothing more. It is repeated and repeated when I manually close my iMac.

  You can not press cmd + R or something else.

  I try to disconnect the decision-making, disconnect all usb and fireware devices but nothing. The problem is the same.

  Anyone knows anything to help me?

  Thank you

  It looks like a hardware problem. You can try to start inSafe Mode.

  If it does not take in any Apple store for a free evaluation.

• Everytime I turn on my Mac Java says he needs to install the message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloSoftware.

  The message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloaded the correct software update, but still getting the message.

  A

  If you have installed the plugin of Facebook video appeal and you no longer want to use it, you can remove it as follows.

  1 back up all data.

  2. open the library folder in your home folder by holding down the option key and selecting

  Go ▹ library

  in the Finder menu bar.

  3. place these items in the library folder to the Trash:

  LaunchAgents/com.facebook.videochat.name.plist

  Support/Facebook app

  Here the name represents the name of your Facebook.

  4 log off or restart the computer, and then empty the trash.

  B

  If you do not use this plugin, or any other software (for example, some Adobe products), which depends on Java, install the Java runtime distributed by Apple.

  C

  If you do not have the Facebook plugin and you don't want to install Java, please ask for further instructions.