Stick of RAM Format?

Similar Questions

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before installing additional RAM for this Mac Pro (2013). Thank you in advance. David

  Hello, all:

  Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before I add that extra RAM for the empty slots this Mac Pro (2013) that a 2 x 8 is installed.

  Thank you in advance.

  Appleharvest

  Post edited by: AppleHarvest (typo corrected)

  The 4 and 8 GB sticks are not saved while the sticks of 16 and 32 GB are registered. As you seem to know, you can not mix registered and unregistered sticks. For example, you can only add 4 or 8 GB sticks to your present 8 GB sticks

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• How many sticks of ram are there in the HP ENVY m4-1115dx

  I bought a laptop computer refurbushied HP ENVY m4-1115dx and I thought that I had to get 2 places available RAM where one of them has a Giga RAM 8 stick, instead, I checked and found that I had 2 sticks of 4 gigabytes of RAM.

  I just want to know if this model comes with 2 stick 4 or 1 stick of 8.

  Thank you

  Hello

  Based on the following link, it has 8 GB and uses 2 slots which means 2 sticks of 4 GB:

  http://support.HP.com/us-en/document/c03619360

  Kind regards.

• After RAM upgrade on stick Satellite L30 - 10V single RAM is recognized

  I just added a stick of Ram 1 GB Crucial in the L30-10 (PSL33E), but only the recognized 1 GB, the Hyundai stick (512 MB), which shipped with the laptop is no longer used by the system.

  I tried to pass it around, but I can only get 1 stick of RAM to work at the time, is 1 GB, when the two Rams are placed in slots or if only the 1 GB is installed or 512 MB when I leave the 1 GB.
  Do you have someone at - he managed to get 2 stick operating simultaneously, on this system?

  BTW, CPU - z recognize the two sticks and reports correctly 1536 MB, the BIOS but only 1 GB, in fact less, since some plans to unlock the graphics card.

  The version of the BIOS on my system is V2.80, dated 05/03/2007 and the two memory are the same speed PC2-4200.

  Hey Abe you're really cool. Sending all these links other forum users can see a lot of different themes is discussed before and using the option to search or the knowledge base of Toshiba, they can find a lot of useful info.

  Toshiba knowledge base can be found under http://eu.computers.toshiba-europe.com > support & downloads > support home > troubleshooting Knowledge Base

• How to format a memory stick

  I downloaded incorrect data and want to erase it from the memory stick.

  Connect the memory stick. Open my computer. Right-click on the drive to the memory stick. Click: Format

• text of numbers of pages (without formatting) or rtf

  I have a very full list of items in two columns that I would like to move to a page or a rtf document.

  I took the colours of the cell and the contours and seem to have been able to paste it into a rtf document that seems to behave a document strictly text (no cell spreadsheet in there). However, when I try to do it in the pages of so I can insert to start a new page, so I can format the document, it seems that it behaves like a numbers copied cell / worksheet.

  is it possible to convert it into a text document?

  None of these options export number seemed to do the trick.

  Thank you

  If all else fails, I often have to paste something I want as plain text in a new document TestEdit. BEFORE gluing make sure that it is really clear and not Rich Text... Look at drop-down menu Format and if you see make plain text, then select that... If you see doing Rich Text, then it is sure to stick. ALL formatting must go.

• MacBook Pro 15 "2011 slow with 2 x 4 GB RAM - but ok 1 x 4 GB

  Hello world

  I upgraded my MacBook to 2 the same sticks 4 GB PC3 of Samsung 10600 S (1333 MHz) RAM and when 2 of them-MacBook is slow in Youtube - same pointer - when, with just a 4GB stick - everything works fine

  When I insert other one to check if its defective - works very well :/ even with a stick in the first or second slot

  Who is wrong?

  the_bart123 wrote:

  2 the same glue to 4 GB PC3 of Samsung 10600 S (1333 MHz) RAM

  2 of them-MacBook is slow in Youtube

  When, with just a 4 GB stick - everything works fine

  Probably a bad stick of RAM.  If you change the banks with the RAM and it works then it's a bad Bank.

  The solution for a bad Bank is a replacement of CPU.

  The difficulty for a bad stick is a good substitute.  Most reputation dealer has a lifetime warranty on the RAM.  Contact with them, once you sort.

  Make sure you have the correct specification on your new RAM by Crucial http://www.crucial.com/usa/en/systemscanner

  If they do not work together then I would replace the two sticks for a 'better' pair - not your fault.

• help with bios/ram

  Hi all

  the story is as follows:

  I have a HP a1555a desktop computer. If it was repaired by HP, they replaced the motherboard. Twice in fact, first replacement was defective also.

  Now when I go into the bios it says the following: revision of the Bios: 3.24 18/01/07

  Basic verion: 08.00.12

  Model number: (nothing - blank)

  Product number: Asteropi

  Build IDS: NULL

  before you have my correct model number, product ID numbers and build now. Also, I can not use hp update because it does not recognize the model as HP.

  The above is without real drama, except that I put in an additional stick of RAM and he does not notice the second Bank. It only recognizes the first bank or ram, which was installed by hp. In the bios it's all gray and I seem to think that it is a bios issue that caused the above questions.

  Any help would be greatly appreciated, and yes my ram is ok.

  Is it possible to erase the bios completely? and start again.

  Thanks in advance ~!

  Try to take the CMOS battery, clear the CMOS jumpers on your motherboard, and finally try retting your BIOS settings in the BIOS.

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• Satellite Pro C50-A-1E4 running unstable with new RAM modules

  I have the above machine and that you have upgraded the RAM (up to 8 GB) a long while ago. Normally I have upgraded the BIOS if there is a new version.

  However, for some so that my machine was unstable, and this is due to the RAM running at the XMP1866 of the machine (933 MHz) instead of the rated CPU 1600 (800 MHz). I have attached a screengrab of Piriform Speccy to report.

  There is no 1.40 BIOS UEFI framework to adjust the RAM timing and so BIOS supports data SPD incorrectly for CPU ID.

  I'm unable to locate earlier BIOS to check if this pattern is repeated, but it took more than a year to display fault so that the machine is out of warranty. If I put small sticks of RAM 1600 system seems stable.

  However, I bought the RAM to use. Now I am unable to test if RAM is faulty because she will not pass Memtest (blocking or crash on) but I'm not sure if instability of the system is defective cause of system being OC because of the BIOS or RAM.

  The question that he is perfectly for about a year before displaying the errors. BIOS should correctly detect the speed of JEDEC standard data in the EEPROM. He does not. I often ran "overspec' memory in other PC without encountering this behavior. It is only troubleshooting that made me aware of this gap.

  RAM is Crucial Ballistix 8 GB-1866 BLS8G3N18AES4CEU.16FE

  If I put small sticks of RAM 1600 system seems stable.

  I doubt that it is a BIOS problem...
  First of all, you can not use any module of RAM... you must use a fully compatible modules and as you probably know, not all commercially available RAM modules are fully compatible.

  As far as I know if upgrading RAM that Toshiba recommends the use of these modules.

  4 GB DDR3 - 1600 PA5037U-1M4G
  8 GB DDR3-1600 PA5037U-1M8G

  The specifications are:
  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8GB
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Rank: Rank double
  Latency (CL) CASES: CL11
  Voltage: 1.5V

  I recommend you use the modules that meet exactly the same specifications.

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• HP Pavilion - 15-ab101ax: HP Pavilion 15-ab101ax Ram Max

  Hello I'm new to the forum.

  Im not a genius when it comes to computers, but I know a reasonable amount.

  OK so here's some info on my system that should help:

  HP Pavilion - 15-ab101ax

  Product ID: p3c85pa #abg

  Processor: AMD A8 - 7410 APU with AMD radeon r5 2.20 ghz graphics card

  Currently 8 GB of Ram

  Windows 10 / 64-bit (not that it's important)

  Basically, I want to upgrade my ram and I was wondering:

  1 - What is the maximum amount of ram can be installed.

  2 - what kind of ram (I could understand this by integrating the stick existing an it specialist?)

  3 - How many ram slots in my machine (of course I'll know when I install the new ram)

  I know 3 is not particularly important but just so I can judge how bad pass on one or 2 sticks of RAM.

  (I would rather order RAM online and receive it befor my laptop I SEPARATE.)

  Hello

  1 & 3:

  Two SODIMM slots - NOT customer accessible / expandable
  Support for the Single Channel DDR3L-1600 (Carrizo-L)
  The DDR3L-1600 Dual Channel (Carrizo) support
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2)
  ● total system 12288 MB memory (8192 × 1) + (4096 × 1)
  ● System total of 8192 MB memory (8192 × 1.) or (4096 x 2)
  ● total system 6144 MB memory (4096 x 1) + (2 048 × 1)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)

  2 as indicated above, it is better to get a Pro to do it for you. If it is still under warranty, you need an HP authorized service provider parts

  Kind regards.

• Kingston KTT533D2/512 for Toshiba Qosmio G20-127 RAM memory

  I'll install additional 512 x 2 sticks of RAM in my computer Toshiba Qosmio G20-127. Someone has already installed RAM Kingston memory? BTW, how many RAM slots in Qosmio is? There are 4?

  Hello

  Just 2 slots are available. The device can handle with 2 GB max. unfortunately I can't tell you anything on the module of RAM Kingston, but the Configurator Kingston said that these modules are compatible should avoid any problems.

  Good bye