Still CS5.1 - Black project after a flash

Similar Questions

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• Can I still use my first CS3 after upgrade to CS5.5

  As I do the learning curve, must I still the first CS3 pro key on my desk once I loaded premium CS5.5 of production of the whole drive?

  In addition to the use of first pro CS5.5, I would still change my prior projects in first CS3 a few times.          Thank you.    -john

  Yes, the programs co-exist and install in sepearte folders. Nothing is deleted or replaced.

  Mylenium

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?

• Ipad black screen after updating ios 9.2 2 mini

  Hi all

  My mini ipad 2 was somewhere in the update to ios 9.2 and when I tried to unlock it, it did not.

  I got a black screen, I thought that maybe battery or something.

  After the cable, I hear the sound of connect 'dived', so he is still alive.

  Then every 5-10 seconds who even connect sound repeats.

  So I tried the following:

  -Home and power button, connect to itunes-> restore

  -Home and power button, connect to itunes-> update

  -Home and power button, connect to itunes->-> tried restoring back to 9.1-> causes error 3194

  So, I tried all of the obvious ways to get the ipad back alive again, but I still have a black screen and the sound of connection.

  What to do?

  See the following support article on error 3194. https://support.Apple.com/en-us/HT201442

  -AJ

• Corrupt BIOS V5 531 Acer black screen after startup, f2 and f12 also. Repairable?

  Hello

  Yesterday I tried to install Win 7 if I could play D & D Neverwinter on Arc after using * nix systems study (looking to start a career as an administrator). I had plugged into a power strip that was, unbeknownst to me, turned off and I went to make coffee and watch some news. When I came back to check the progress of my laptop was powered off and since then I havn't been avle start without being blocked at a black screen after the start page of the bios. The f2 and f12 also leads to a black screen, I can not change the boot device or enter the bios Setup.

  Is - fixable at all? For example, is the a key-combo, I can use it to restore from a backup bios? Or, do I have to bring in a technician who can install a new chip bios or flash this old some how? Or did I brick pemanently my device?

  V1.22 is what you want to be part of a unit of Windows 7.

  The problem is if it crashed during the upgrade process, it will take some special tools clearly on the chip on the MB and recharge it with a new BIOS. I would contact your local support team to see what options are available.

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• computer only blinked a cursor in the corner of a black screen after that it shuts down. Was it an accident?

  Original title: was it an accident?

  My computer only blinked a cursor in the corner of a black screen after that it shuts down. then the fan stopped running current and the screen went blank, but I could still hear the hard drive running. Was it an accident?

  Yep, especially if she does not return.

• I get BSOD after Bios flash, can connect in safe mode.

  Hi all

  I use a laptop HP DV3145 DX, OS is win 7 Home Basic (it came with the laptop).

  A few days ago my screen started to behave erratically. The lower part of the screen is blurred and was unreadable. So I have updated Bios with the HP support assistant.

  After I flashed the bios, I could connect to windows, but every time I log on to the windows it crashed (BSOD) after 30 to 60 seconds.

  I could connect to the computer in safe mode

  That's what I did

  1. connected in safe mode and disabled all startup program (used Msconfig), with the exception of microsoft. This did not help.

  2 activated the player HP_tools disk management and I see the Bios, Bios_new file is there.

  Now, what should be my next step? I want to factory reset as my last option, I have a lot of settings, digital certificates, backups of phone in this machine, those who are important to my work.

  I think to Flash the Bios to the previous version to see if that helps. Now, I don't consider myself a very experienced user. So if anyone can tell me how to Flash the bios to the older version, I'll be grateful.

  I would also like to hear any other suggestions, others may have.

  * PS: I can't update windows drivers (I've updated about a month ago), because the 3 G dongle that I use is not having recognized in safe mode.

  Thanks in advance,

  Magassa

  You should not have flashed the BIOS. Updating the BIOS is not a magic solution to all the problems. You must perform as the first response to a problem with your laptop because it adds an element of risk.

  You should use the diagnoses instead. Press the power button and immediately press the ESC key. In the start menu, choose to press the F2 key to invoke diagnostics. Perform a system test, a test of memory, a hard drive test and a test video.  Let us know what are the results of the diagnostic test. The image is a more recent version that is installed on the hard drive of your laptop, but is still pretty similar.

  

• Black screen after the failure of the connection - win 10 win7 installation

  Hello

  SYSTEM ERROR
  Cause
  I tried to install win10 on a PC running win7. Installation stalled at 99% and I restarted.
  The problem
  Now he still run win7, but once connected, the screen is completely black except for cursor. Features such as the job-work list as it should and in safe mode, the screen is not black after login.

  PC INFORMATION
  The video card
  My video card is "Mobile Intel (R) 4 Series Express Chipset Family" (driver version: 8.15.10.2202) Driver date: 25/08/2010) and windows tells me that the video card (graphics - in my language) is updated to the latest version.
  The model
  ASUS Pro79I Series. With Windows 7 64 bit

  Mathias, cordially

  Denmark

  Hi Mathias,.

  According to the description of the issue you do not get black screen after login in safe mode. For example, there might be a chance that the display driver is either corrupted or need a update. Please, try the steps to uninstall graphics card in Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the graphics card from the Web site of the manufacturer (ASUS)

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7