Still fragile Adobe video when it is burned on a DVD

Similar Questions

• Error: there is no recording device detected when trying to burn CD or DVD

  Original title: drive or CD or DVD disc burning

  I have re-installed Roxio Easy CD & DVD Creator 6 on my pc. It was installed and worked very well before.

  I have open and try to burn a DVD, and he says there is no record of the found device. I have burned many DVDs using this program before.

  I also open iTunes to listen to music and I get this error message.

  Caveat!

  The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes.

  I uninstalled Roxio and iTunes and reinstalled iTunes but with no result on the possibility to even burn CDs again. I tried to system restore to before I installed Roxio, but it does not point restoration to date that I have installed (3 December 2010), I also can't go back to November to see if there is a restore point for that month.

  Hi fischer881,

  Try the following steps to start the IMAPI CD-Burning COM Service and check the result.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click IMAPI CD-Burning COM Service.
  c. change the startup type to automatic, and then click Start.
  d. click on apply and then click ok.
  e. restart the computer and check if the problem persists.

  For additional troubleshooting steps, see http://support.microsoft.com/kb/324129
  See also: Secrets of Windows XP CD burning

  For support of iTunes, please post your query to iTunes Forums

  See also Forums of Roxio

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plays fine in WMP, when it is burned to DVD long gaps between tracks

  I made a movie of photo with music, edited, saved, double checked in WMP, but when it is burned on a DVD, there are long breaks/gaps between some songs that isn't here on WMP, frustrated, must be for the funeral

  As in windows movie maker... For Vista, there is an upgrade for him, the version must be v2.6

  Also, microsoft has had a series of Encoder 9 WM, it can "convert" video, it also has many utilities

  that go with... Utilities are ok at the microsoft Download Center, so are updates of the encoder, but

  the encoder is not listed... Try an internet search engine, download it, open the encoder, select this option to convert

  the file, create a new folder for the converted data, then try it with WMP...

• After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  This screenshot shows all of these plugins as being (disabled) and "grey" - click on the button Activate on the right side.

• I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc

  I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc.

  Hello

  read this and see if this solves your problem

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

• Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I'

  Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please

  The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.

  However, you can delete the 5876 to get a view of the desktop and all do it muse site

  for example, the home page

  change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only

  Office ex = yourweb page | Home

• When I upload to my PS library photography still has Adobe stock of tide on that photo! what I am doing wrong

  When I upload to my PS library photography still has Adobe stock of tide on that photo! what I am doing wrong

  kellyl30804045 wrote:

  That's what I get when I try to use the image downloaded from adobe stock

  You get this error message when you try to open an Illustrator (.ai) file in Photoshop. You must open the file in Illustrator and export it as jpg or png and open in Photoshop or you create a new image in Photoshop and then drag this picture on it from the library. The first option is best if you need to edit the picture somehow.

• How can I purchase a subscription to Adobe Ps when Adobe think that I am still in a country not Adobe CC - taken in charge?

  How can I purchase a subscription to Adobe Ps when Adobe think that I am still in a country not Adobe CC - taken in charge?

  I made my account and my free trial when I was in the Kenya. Even if I moved back in England, he always consider myself to the Kenya when I try to purchase a monthly subscription to Adobe PS.

  I changed my 'country' in the United Kingdom, but this still does not seem to work. Any advice would be much appreciated.

  Thank you
  Will be

  Please make sure that you have selected the right country from the lower left side of the Adobe Web site.

  See:Adobe - choose your area

  Concerning

  Megha Rawat

• I used my code from adobe, but when I try to install my program it still says I need to buy it. But I already did and I used my code.

  I used my code from adobe, but when I try to install my program it still says I need to buy it. But I already did and I used my code.

  You get 'buy' on Creative Cloud App?

  If yes then disconnect you from Creative Cloud App and back panel

  Sign out, sign in | Creative cloud desktop application

  If you get the same status and then check your entries once hosts file

  Log, activation, or connection errors. CS5.5 and later versions

• How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  You must change your page design if the link does not occupy the full screen of your content.

  Neil

• Reduction in the size of the film when burned on a DVD

  Hello

  I'm using EPA 11. Several times I have copied TV programs of my Sky + rewritable disc on DVD through my DVD recorder/player, here of EPA on my PC where I change them - usually remove ads etc. - and then they burned on a blank DVD to appear on my TV. Basic, simple stuff and no problem until today when I tried to do it with a movie about three hours in length. Here is the chronology of the events:

  1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);

  2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.

  3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.

  4. After mounting on the EPA, he was always in the same dimensions;

  5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but

  6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.

  Any ideas, please?

  Thank you

  Ian

  Ian

  What version of Premiere Elements and what operating system is involved?

  1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);

  Just what is normal dimensions - 720 x 480, 16:9, 16:9 1280 x 720 or 1920 x 1080 16:9 or others?

  2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.

  Where you burn on DVD-VIDEO to DVD - RW disc, and what was the specific burn screen 16:9 or 4:3? You deal with the usual 720 x 480/720 x 576 resolutions or a custom resolution?
  

  3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.

  What was the predefined project used for this project? Please explain "copy" - after ensuring the good the project 4:3 or 16:9 preset, do you insert your

  Disk DVD - RW in the burner tray and then select Add media or get media/DVD camera or computer drive/video importing and end with

  Creating files video elements timeline DVD (VOB)? A project 4:3 or 16:9 at this point? And, what have you used to burn to and

  its setting - publish + share or share/Disc/DVD with preset = DVD Dolby NTSC_Widescreen or something else?

  
  

  4. After mounting on the EPA, he was always in the same dimensions;

  And what were the dimensions.

  
  

  5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but

  Please confirm that you use here - what project screening and what burn specific selection Publish + share or share/Disc/DVD - NTSC_Widescreen DVD Dolby or something else?

  
  

  6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.

  Assuming that the you're in a position of workflow for the DVD-VIDEO playback on DVD-R disc, what are the properties of the VTS_01_1.VOB in the VIDEO_TS folder on the DVD-R disc. Properties see audio video Media Info (tree) of the program. If Windows http://sourceforge.net/projects/mediainfo/

  Just be careful to download and install choices so that you don't receive any unwanted baggage that might come with MediaInfo.

  
  

  There are several places along the way where you could have ran into the parameters of a project and export settings conflict. And we must not throw a question of TV settings.

  Please consider.

  RTA

  
  

• I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Please

  I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Help, please.

  This link shows that 8.3 ACR supports the Nikon D610 and 6.7.1 was the final version for CS5.

  Camera Raw plugin | Supported devices

  If you can switch to CS6 and ACR 8.7.1

  or using the DNG converter, convert your Nikon raw files to DNG to open in CS5.

  Here is the download link: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1

  or Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7.1

  And here's a great video tutorial on how to use the converter.

  https://www.YouTube.com/watch?v=0bqGovpuihw

  Gene

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Get still images from video

  I saved videos from my mobile to my computor. How can I create still frames from video to print photos?

  Hi Angus C.Duprey,

  Welcome to the Microsoft answers site!

  You can use the cutting tool for this task. To do this, follow the steps mentioned below:

  Play the video, pause the video (to capture the image you want), then open "tool captures.

  Open the capture tool by clicking Start, all programs, accessories, and then click Snipping Tool. Click, drag and save.

  See the link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  You can also play the video when you want to capture the image, press the print screen key (on the keyboard) and then to open a program, such as photo touch-up paintand paste and save it.

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Burned using Windows DVD maker photos are blurred when read

  Pictures inserted in creation of DVD of Windows7 and burned to a DVD disc are dimmed when read on television via a DVD or Power DVD on the PC drive (origonal photos are sharp)

  No problem with ULEAD DVD Movie Factory

  Hi Barry Robbo.

  1 when was the last time you were able to play a DVD burned successfully?

  2. did you of recent changes on the computer?

  3. What is the file format of the burned photos?

  4. which Windows Player do you use to play the burned photos?

  A DVD may not play properly in some DVD players or DVD - ROM readers to one of the following reasons:

  • The type of drive may not be compatible. Some DVD players or DVD - ROM drives can play some types of DVD. For example, some DVD players only play discs DVD + R or DVD + RW, while others play only DVD-R or DVD - RW discs.
  • The quality of the disc may be too low. Some DVD players or DVD - ROM drives will not play DVD if the disc is not in good condition or if it isn't a high quality disc. If your Player cannot play a DVD, you can try to burn again using a higher quality DVD.
  • DVD decoding software can not be installed on the computer. If you try to play the DVD in the DVD drive on another computer, the DVD will not play if DVD decoding software is not installed on this computer.

  To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 1

  First of all, I suggest that you try to view the pictures burned using the Windows Photo Viewer.

  1. open the photo library by clicking the Start button, click photos.

  2. in the photo library, open the folder that contains the picture that you want to view and then click on the image.

  3. on the toolbar, click the arrow next to Preview, and then Windows Photo Viewer.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Method 2

  If you are facing a similar problem in sight the pictures burned in Windows Photo Viewer, then uninstall any ligthscribe third-party burning software installed on the computer and then try to view.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.