Error: there is no recording device detected when trying to burn CD or DVD

Similar Questions

• Error: "at least one tracks is protected"when trying to burn some songs CD's favorite original

  Original title: the protected when burning music

  I hope that this question is in the right place.

  I am trying to burn some my tracks favorite original CD in my library on a blank CD, so I have all my favorites on CD one.

  The problem I'm having, is that when I start to the burn, a window appears and says... "that at least one of the tracks is protected"

  Where to look, or go to find that trace is in order to remove it, and then burn the rest?

  Thanks in advance.  :-)

  Hello

  It seems that burning rights are missing for one of the tracks.
  It's ok to burn the tracks. If CD burning rights are missing on the slopes, then you will burn successfully tracks.

  If the song file is protected by the rights of use, these rights may allow for playback of the song on the computer but prohibit burn them on a CD. If the Information button appears next to the song in the burn list, click the button to see more information on the issue. For more information on usage rights, see the DRM: frequently asked questions.

  For more information, see burn a CD or DVD in Windows Media Player: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• Error: Insert the CD into the CD player when trying to burn disc Windows Media Player

  Original title: cannot burn music from WMP.

  Try to burn music from Windows Media Player, does not drive D: burn:

  A cd I burned another computer, read in my drive D: as "CD ROM".  But I got a 'blank' CD - R in drive D: and it has not recognized - msg "INSERT CD into DRIVE D:" only.

  I don't think I have a drive for burning CDs. -correct?

  007Trina

  Hi 007Trina,

  1 you get an error message when trying to burn the disc using Windows Media Player?
  2. what version of Windows Media Player?

  It seems that the CD is not recognized as a recordable device. We recommend you to try the steps mentioned in this article and check the difference:http://support.microsoft.com/kb/316529

  For more troubleshooting, see How to troubleshoot problems that occur when you write data to an optical disc CD-R or CD-RW in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  Hello raulganau, welcome.

  I suggest to try the system restore to restore the system to a date before the problem started. Try this...
  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."
  6 follow the instructions on the screen to restore the system to a date before the problem started
  Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
  For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
  http://support.Microsoft.com/kb/306084
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Still fragile Adobe video when it is burned on a DVD

  I am in adobe, creating a Menu System.  The menu system is linked to a video which is a first MPEG2, quicktime, even exported.  I tried exported in the format of H.264, first with no luck.  Whenever I have burn the video on a DVD of reminder, it becomes extremely fragile when played. I tried also exports it in 1920by720p, 720by480p and 480by36. the video still seems to be fragile when it is burned on a DVD. Does anyone know of a sollution to this problem?  Thank you.

  Lydia

  Export to mpeg2-dvd to first. Use a preset or set manually.  If the source is HD value upper field or source is progressive, assign him to any field.

  Import a film, do menu and burn.

• Record/play why my pc does not burn a cd of sound? He's going through the motions, but there's nothing on the disc when it finishes burning?

  Why my pc is not burn a cd? He's going through the motions, but there's nothing on the disc, cd, when it finishes burning. It was working ok and then just stop?

  Hello

  ·         What operating system do you use?

  ·         What application are you using to burn the CD?

  ·         What exactly you are trying to burn on the CD?

  .      There the latest changes on the computer before the show?

  Please provide us with more information about the issue so that we can help you further. During this time, I would suggest to run this Microsoft fix it to the tool and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Logitech c310 incompatible device detected when using Skype

  Original title: logitech c310 windows does not detect the device

  I bought the new c310, detected device and the software loaded everything worked for about four days, tried to Skype but incompatible device detected, notlisted in any location of the hardware store, uninstalled/reinstalled, taken in camera, incompatible device.  Logitech software is fine - that happened on 4 previous cameras also on my computer laptop and pc

  Hi Bigstuman,

  1. This only happens with Skype?

  You can consult the following links to Logitech support and check if it helps:

  http://forums.Logitech.com/T5/video-chat-applications-non/all-posters-how-to-make-your-Logitech-camera-work-in-an-IM/m-p/46373

  http://forums.Logitech.com/T5/video-chat-applications-non/QuickCam-not-working-with-Skype/m-p/29645

  If the problem only occurs with Skype, you can consult the following the support of the Skype forum link and post your query:

  http://Forum.Skype.com/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: 'capture string not in correct format' when tried to run Microsoft Fix it

  Original title: micro solve this Center meets all attempts to click for repair by 'string input not in the correct format' to try to correct the printer does not print not while going through all the correct motions.

  Please see above under

  Hi llc333,

  1. what web browser are you help you to download Microsoft remedy?
  2 you get an error message when tried to print?

  Try these steps and check the result.
  a. Click Start and then click Printers and faxes.
  b. in the menu help, click on Help and Support Center.
  c. in Help and Support Center, click fixing a printing problem.
  d. in the right pane, click Printing Troubleshooter.

  Check if the following articles help you to fix the printing problem.
  1 see resources for the resolution of the printer in Windows XP problems
  2 see Advanced Troubleshooting for when you cannot print in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive "not writable disc" when trying to burn videos

  original title: How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  ================================================
  No matter which CD or DVD you purchase in a Virgin package is writable.

  And I'm guessing that you have a DVD burner?

  What program you use to create the slide show?

  The following article might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• Receive "the file is greater than CD" message when trying to burn music

  original title: error burn.

  I'm trying to burn music to a CD of my files and had a message saying file is larger than the space CD, how do I

  If it's a wav file that you need to it on 2 CD download and use Audacity (Editor audio freeware) to edit the file and cut out. Turn it into an mp3 file or burn it as a data file.

  Or, if its an mp3 file, open it in Audacity and save it in mp3 format, but with a lower rate.
  ATTENTION: not all players can read burned CD, mp3 files first consult their documents.
  See you soon,.
  Jerry

• Error message "please connect a device supported" when I click on webcam

  I have a DELL vostro 1015.It was big enough. Only problem is that today ' today I clicked on my webcam because I wanted to use it, and it gives me the error message above. I have NO idea what. Please help me find a solution.

  And if possible, let me know how I can get the games on my laptop - I got zip! Nada! Not even the hearts, one of my favorite special

  Hi EileenCK,

  Step 1: Run the fixit available in the link below to diagnose and fix problems with the webcam automatically

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  Step 2: You can download and install the latest drivers for Webcam and utilityfrom the DELL link below

   

  Link drivers DELL

   

  A similar issue was addressed in the DELL community below link; You can see the steps

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19271842/19476201.aspx

   

  You can check with DELL to known problems

  http://support.Dell.com/support/index.aspx

   

  With regard to your gambling problem

   

  Game of hearts is available in Windows 7; Follow the steps mentioned in the link below to install Windows games. If you referring to other games, you can download them from the internet, use your search engine preferred to look for the games.

  Install a game in the Games folder

  http://Windows.Microsoft.com/en-us/Windows7/install-a-game-in-the-Games-folder

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Media Player 11 error: "connect burner and restart the player ' when trying to burn a CD

  Original title: Media player 11 on dell e510 in XP.

  When I try to burn a cd with media player, have a message 'connect burner and restart player' and burn is dimmed.  I have a sony crx310ee internal d ' training.  Media Player will play cd but does not recognize the burner.  Was able to burn with Roxio but uninstalled trying to get media player to work.  Have you tried to update the driver, but I'm told that nobody no more recent is (over 3 years).  Removed upper and lower filters.  Have not unhooked by car and restarted.  Do you have a regedit and changed the 3 to 2 Volume guid value.    This adds the record to the properties of the drive button.  Have run convenience store and it reports the device is not a burner, which is incorrect.

  Help!

  Yes!  Think my problem is resolved.  Had ignored a suggestion to uninstall the burner and reboot.  This seems to have solved the problem since I just burn a CD using media player.

• Error: Cannot copy Admin$\system32\dwrcs.exe when trying to use DameWare NT Utilities card remote Commander for remote control a workstation.

  Original title: impossible to copy to Admin$\system32\dwrcs.exe.

  I'm using DameWare NT Utilities card remote Commander for remote control a workstation.   Other workstation remote control works fine.   On the workstation with the fact that I'm having the problem the following message appears:

  Cannot copy
  C:\Program Files\Dameware Development\Dameware control\DWRCS.exe mini remote

  TO

  \\workstation-name\ADMIN$\System32\DWRCS.exe

  System error: 5

  The system message:

  Access denied

  I don't think it's a matter of DameWare since other workstations are accessible.   I think that this could be a Windows problem with a kind of security.  Anyone know?

  Hello

  Your computer is connected to a server, or a domain?

  You can follow the steps in this link:

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Access denied messages when the connection to the remote PC

  If your computer is on a domain network, I'd recommend posting your query in the TechNet forums.

  Hope the helps of information.

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.