Stock levels down even when an order is cancelled when ordering?

Similar Questions

• Satellite L850 - error of cooling and slow down the speed of the CPU even when fan to 80 c

  So, I have this problem that my fan stops turning when the system is under load and then turns on, starts running at the speed of 100%, an error which says error with cooling system, laptop computer back to the service.

  The fan slows even when the laptop cools completely, it only returns to normal speeds once I closed the laptop.

  In the last few days, which has stopped completely. Now the fan won't even middle speeds even though the CPU temperature is 80 C. Due to the bad news of cooling time score about 70 ° C, even at idle.

  The laptop is almost a year. I already had this problem after a week of buying it, and they replaced my processor. I have windows 7 x 64, amd 7670 m and 2350 m i3.

  I wonder if this may be a BIOS problem or I have to take for the service? How can I stop this from happening? And Yes, my power plan is on high performance.

  AFAIK the cooling fan is controlled automatically if you don t have a any influence on it. Temperature sensors are placed on the motherboard and they control the cooling fan activity. That one possibility to change fan cooling activity is to change the option in the option of cooling method (advanced power settings > Toshiba saving settings).

  In my opinion the best solution for you is to contact the nearest Toshiba service provider and ask for help.
  They have diagnostic tools that you can check all this.

• Check-in format JPG - CS5 default, PSD, unfolded even when

  I am frustrated with this problem and cannot find a solution, I apologize if this has been discussed before but I couldn't find it.

  When I go to save an image 'file format' drop-down list box default PSD each time, rather than the original format of the image. This occurs even when the image is flattened and regardless of the bit depth.  It does not seem that big of a deal just the drop down box and select "JPG", but when you work with hundreds of images it becomes tedious. Sometimes when I change the format he tells me that I must save it as a copy & adds automatically 'copy' in the name of the file.  I have the specific file naming so I manually delete this element in order to save over the original file.

  It is a number (year or almost) quite recent because I used to be able to use my programmable keyboard for this and he made things SO fast! Now I am forced to use the classic keyboard/mouse, and it slows down my work flow.

  
  Thanks in advance!

  You probably have your value 16-bit/channel raw files. If you switch to 8-bit (raw file open, click at the bottom of the window where it says 16 bits change to 8-bit, click ok), jpeg will be the defult

• voice on does NOT even when her off in settings and return to factory reset

  voice on isn't turned off, even when its off in settings and I did a btw the last Apple tv a factory reset update

  For the VoiceOver:

  Settings > general > accessibility > voiceover

  For a description of the Audio:

  There are two parameters that can affect the audio descriptions; the first is a universal framework and can be found at settings > general > accessibility > Audio Descriptions and the second is a parameter that affects the movie playing, it is sliding down while the movie is playing and change the language setting on the audio tab.

• iPad Pro think Smart Keyboard is still connected, even when it is not

  Hello. I have an iPad 9 "Pro that I've just updated to iOS 10. I had a Smart keyboard because I bought the iPad 6 months ago.

  Since I updated the operating system, even when I disconnect the iPad since its Smart keyboard, iPad think he is always connected, and I can not access the on-screen keyboard. It happened not in iOS 9. Suggestions/help?

  Thank you.

  Hello NerdyMomBriggs,

  Thank you for this info and choose Apple Support communities. I know how it is important for you to have your Smart keyboard and iPad Pro work properly again! If I understand correctly, you cannot have your Smart keyboard automatically cuts your iPad Pro when you pull the Smart keyboard physically the Smart Connector. To start, make sure your iPad Pro and Smart Keyboard are in a position to Type. Remove the Smart keyboard for your iPad Pro. Restart your device, like closing down and starting process is important to keep the iOS software works correctly. Once your iPad Pro is restarted and return to the home screen, reconnect the Smart keyboard and test the question.

  Use your Smart keyboard with iPad Pro
  Restart your iPhone, iPad or iPod touch

  See you soon!

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• HP Jet 8: 8 HP flow can't keep not fresh, takes place at 0% even when it is plugged

  My HP flow 8 tablet has never held public office.  I leave it plugged in all night and the next day it is fully charged, but the charge only lasts 2 hours at the most, even if it is plugged I use it all the time.  He goes down to 0% and turns off.  I put aside for several hours to recharge.

  I'm looking for another Tablet, but the flow 8 HP serves all my needs except that it only lasts 2 hours before going to 0% while I use it, even if it is plugged in all the time.  I really hope to solve the problem, rather than having to buy a new tablet.

  Any suggestions?

  If you hold the low volume button while powering it will enter in the BIOS boot menu, you can press F2 to run diagnostics and there is a component for the battery test.  I think you are saying that the screen turns off after that two hours than even when the charger is plugged in, it does not seem that should happen.  If you have not already, try another charger.  If you plug the USB on another computer, which will allow to load also.  You can update the BIOS if you have not already too.

• My thing to the notifaction red circle imessage is not popping up even when there are unread texts.

  Even will not appear my red imessages bubble. Even when I just get a message as well. There are some unread messages again and I did not open my app again and again, it does not show the number of notifications to the application. Help, please.

  Hi risa212,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. If you do not see the Red badge of notification of unread messages in the Messages, you can check the Notification settings to ensure that the notification of the badge has not been disabled:

  Change Notifications settings

  Some applications such as email or social media applications send frequent notifications that could affect the battery life. If you have the show on lock enabled for notifications screen, it could also affect the autonomy.

  To disable or change notifications, go to settings > Notifications and select the app. You can also sort your most recent alerts, order them manually, or group them based on the application.

  

  If you do not see the notifications for a specific application

  To get notifications, you must be connected to a Wi - Fi or cellular network. If you do not get notifications for a specific application, try the following steps:

  1. Make sure that the application supports notifications. Go to settings > Notifications, select the application and make sure that Notifications are turned on.
  2. Make sure that you are connected to your Apple ID on your iOS device. Go to settings > iTunes & App Stores and enter your Apple ID and password.
  3. Make sure you do not disturb is turned off. Go to settings > do not disturb and tap manual if it is enabled.
  4. If you have recently installed an app or restored from a backup, open the app to start to get notifications.

  Use the Notifications on your iPhone, iPad and iPod touch - Apple Support

  Concerning

• My iwatch does not give my notice of iMessages, even when my notifications are mirrored on my iphone

  My iwatch does not give my notice of iMessages, even when my notifications are mirrored on my iphone

  Hello

  How notifications behave depends on the State of your devices. In order to provide notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or asleep and that your watch is unlocked and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  About notifications on your Apple Watch - Apple Support

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv4: battery does not charge even when it is plugged (load plugged says), but doesn't move 19%

  Hello hp Support Forums.

  Hardware specifications of the machine (if required):

  Laptop model: HP Pavilion dv4 Notebook PC
  OS: Windows 7 Home Premium x 64
  CPU: Intel (r) Core i5 - 3210M @ 2.50 GHz (4 processors)
  RAM: 8192 MB RAM (4096 MB x 2) DDR3
  Graphics card: Intel HD Graphics 4000 @ 1 696 MB
  Audio: IDT High Definition Audio 16-bit
  HARD drive: 750 GB SAMSUNG Spinpoint M8 ST750LM022 HN-M750MBB

  I own a laptop PC hp Pavilion dv4 laptop and this morning there was a sudden battery problem, I was playing Dota 2 and the Steam interface told me that the battery percentage was 12% (7 minutes from the end) then I moved and grabbed the chager, plugged into the outlet and plugged the charger in laptop a few seconds later the laptop turns off suddenly and won't restart, even if the charger is plugged there no light came from the load indicator.

  A few minutes later do research for similar problems, there was a solution to remove the battery and the charger then press and hold power for 30 seconds and 3-5 minutes then return the battery but it did nothing.

  After with some research, the indicator load on all of a sudden and when I start the laptop it was on 12 percent and billed not (there is no indicator that the charger is plugged) and turns off suddenly without warning.

  Later, with a bit of panic and thought, I removed the battery and the charge light lit, which allows me to boot up the laptop and when Windows starts, I plugged it to the battery and it says: 19% (plugged in, load) so I track for a bit, but it didn't move at all, even when I changed the power of High Performance for HP recommended settings , window 19% available (plugged in, load) but it's just, it, don't move or anything like that.

  EDIT: When I unplugged the charger to move my computer laptop and plugged in again, the indicator not lit and does not charge the battery thus forcing me to shut down or Hibernate, and remove the battery to the charge light.

  Your battery is quite likely to be having no longer life left.

  It is that if your laptop starts up without the battery, since the race, the battery test is not a viable option.

• my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  Hello

  Recuva worked for posters that have been in your same situation here

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• Battery does not charge even when it is plugged

  Hey world-

  I currently have a Dell Laptop Inspiron 1525 I bought in April 2008. A few weeks ago, I noticed that my battery has not been reloaded, even when it's plugged in, and I confirmed it by clicking on the icon the battery and reading, "plugged in, not charging.» Because my battery is over a year old, I advanced and bought a new battery AND a new laptop computer charger, just in case where it's the two that were dead/defective.

  However, the issue has not changed: battery still says: "plugged in, not charging.»

  I checked with different points of sale, I changed my savings 'power' on my computer and I looked over my ports - everything is in working order.

  How can I get this problem resolved?

  Hello

  Is worn or old battery?

  Check with Dell Support, their drivers and documentation online and ask in the Dell forums
  for problems known. There may be BIOS or other updates available from Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ===========================================================

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista Ultimate x 64 freezes randomly even when you are not running applications

  I feel the random system freezes from my PC. My PC Spec is below. Even if being run without applications and the system is on the desktop system will freeze randomly (can not move the mouse and the keyboard does not respond) and will force me to restart the system manually. I noticed an error message in the event viewer what cultures upward each time that this gel coming and I was wondering if you could provide me with a solution?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  

  I have included my PC specs and components below, but it is unlikely to be a hardware problem most of the time, even when focusing on the computer with 'memtest' etc it will not break.

  Power: 800 W

  [Product information]
  * Product type: motherboard
  * Product model: M4A78T-E
  * Product S/N: 93MOAI569328
  Place of purchase: www.scan.co.uk
  * Date of purchase: 2009/6/7

  [Map mother specifications]
  * Revision of the motherboard: 93MOA1569328
  * Card motherboard BIOS revision: worm 2208

  [VGA Card Specification]
  * Supplier of the VGA card: GIGABYTE
  * VGA card model: GV-R467ZL - 1GI
  * VGA card Chipset: ATI RADEON HD 4670
  * VGA card driver: 8.563.0.0

  [CPU specifications]
  * Provider of CPU: AMD
  * CPU Type: PHENOM II X 2 550 BLACK EDITION
  * Processor: 3.1 GHZ

  [Specifications memory]
  * Memory seller: CORSAIR
  * Memory model: XMS3 DDR3
  * Memory: 2 X 2 GB

  [HARD drive specifications]
  Seller of HARD drive: WESTERN DIGITAL
  HARD drive model: CAVIAR BLACK
  HARD disk capacity: 160 GB

  [The module map specificatio]
  Seller of maps add-on:
  Type of card module:
  Model of card module:

  * Operating system: Vista 64 bit

  Hello

  Try the clean boot method, which is a process of elimination to see what could be the cause
  the question. Pilots also have an influence on the performance of the system so I would update those
  as well.

  Norton has been known to cause strange problems on some systems, so I would use the
  Norton Removal Tool to check its impact. The following recommendations for free
  replacements, so you have good protection while check you this. Download all
  replacements before you remove Norton and install after removing and resetting.

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN
  (Norton Removal Tool and others)

  Norton Removal Tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  -------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y   <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How is done whenever I connect to the internet, its random starts to play even when I have no open browser? Is this a virus?

  The problem started last week after my computer installed the automatic updates. Since then, my desktop aero settings last haywire and as I said in the title, the (possibly videos) sounds play even when I have no open browser. I know, there is a security update that caused computers down, but this update is no longer on my system. Please help me.

  I heard of a virus causing similar problems. Take a look at this site for some good information/instructions.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.