STOP 0x000000A goes to stanby

Similar Questions

• computer randomly stops... no blue screen, everything stops and goes to sleep

  I have a HP 64 bit, the computer randomly stops, no screen blue, everything stops and goes to sleep... I had 2 technicians to look at, but since it is random, they have been unable to find something that would make this...?

  Select Start, Control Panel. Action Center, click on the down arrow to the right maintenance, click view reliability history. In the chart, you will see red orbs, click on one and it gives details and to the right are another link saying see technical details. You can copy and paste the description in a new message to. Repetition of reports are more relevant than the one off of problems.

• Satellite L300-AM stops - temperature goes up to 72 c

  Hello

  I bought the Toshiba Satellite L300-AM in December.

  Now I have a big problems with temperature. It's going to 72 c...
  And my laptop is blocking on itself.

  What can be the problem? And what do I do?

  Thank you

  Hello

  In my opinion the laptop stops due to high internal temperature.
  Internal sensors watch the temperature and if it would rise to a higher level while the laptop stops to prevent the equipment from damage.

  In most cases, the temperature increases because the internal cooling modules can not cool the CPU correctly.
  The main reason for this is a piece of debris and dust!

  I had this question several times on my cell phone 6 years old. After some time, the cooling fans are blocked and cannot function properly.
  In such cases, it s advisable to clean and remove the dust with a professional pneumatic sprayer.
  These aerosols can be bought from the other computer dealers.

  Remove dust fans and cooling grids and check how the laptop would work.
  In addition, make sure that there is enough free space around the laptop.
  This is important because of the flow of air.

  Check it out!

• A song stops and goes to the next song in iTunes.

  My favorite song of Foo Fighters stopped playing 4 seconds and then move to the next song.  It does on my iPhone and iTunes online.  However, it will play through on my Groove music completely in Windows 10.  Help!  I need this problem soon... I can't do a flight of 5 hours without him!  Thank you!

  Whenever this happened to me, it's because a synchronization failed to halfway through or I disconnected while downloading an album. Usually the withdrawal of the album and add new solves the problem

• HP Pavilion 17 J5B89EA #ABU: my laptop is no longer properly stops or goes into standby or hibination

  Hello
  I recently started getting a problem has occurred to the bottom of my laptop and also with sleep/hibinate function.

  I made sure all updates are updated via HP support Assistant.
  I also disabled the quick start of the function that was identified as a potential problem.
  I also learned that the BIOS may need to update, but thought that it would be part of verification of Assistant HP support for updates.
  The current BIOS is F.34 Insyde, 19/12/2014
  If this is not the most recent, is there a link to I upgrade to the latest version.

  If not is there any other suggestions as the only way to close it completely is a difficult stop hold the button to power down.

  Thanks much for any help.

  Cooktop

  Hello

  You are welcome.

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the machine now shutsdown correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Computer randomly stops and goes into a reboot loop

  Original title: computer stops randomly on its own.

  When my computer is running, it will restarts randomly.  Any suggestions on why he can do this and how can I stop doing that?  Thank you!

  Hello
   
  1. do you remember any changes on your prior approval to question that occur?
   
  In the meantime, follow these steps and check.
   
  Step 1:
  
  You can check if you can "disable automatic system failure reboot " from the options in advance. In this way the computer will not go into a reboot loop and you will be able to note the error code, if any. If you see no error code, you can answer comes back with the error code.
   
  Step 2:
   
  I suggest that you start your computer in safe mode and check if the problem persists.
   
  Step 3:
   
  If the system works fine in safe mode, I suspect that there could be a conflict of software of third party causing the problem to occur. I suggest that you start your machine in a clean boot State.
   
  Note: Follow step 7 to your computer as usual.
   
  See the below article access in Event Viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Flash player crashes. Video stops and goes. Will not play consistently. Is there a way to update flash player? What are the steps to do it?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't watch the videos on my laptop. Videos stop and go without running consistantly unless I wait long for it to download. Is this a problem with my Flash Player. If so, how do I update to solve this problem? You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  If this does not work, try here:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.
  Mick Murphy - Microsoft partner

• How can I stop automatically going into the tab when I right click on a text of google search?

  before the update every time that I would be a highlighted text and right click to perform a google search would not automatically to it. However, he does now and getting on my nerves. How can we change it?

  Hey kevindigg, you can enter Subject: config in the address bar of firefox, confirm notification of information (where it appears), search for the preference named browser.search.context.loadInBackground & switch true by double-clicking it. This should bring back the old behavior...

• Lightroom CC stops after going in a few clicks

  I've been running Windows 10 for several weeks on a Dell XPS8700 with 24 GB of RAM. Lightroom and other CC applications were all working well. Suddenly no reason apparent Lightroom CC now ends itself after just a few clicks. It started after a few days of intense use resulting from a photo shoot and it makes now Lightroom CC inoperative. Uninstall and reinstall Lightroom CC didn't solve the problem.

  I'm alone with this problem? Any suggestions?

  Thank you.

  J.R. link

  [email protected]

  The problem seems to have been resolved.

  I discovered that Lightroom requires quicktime to work this is the slide show feature. I use Windows 10 and Apple will not install quicktime in Windows 10.

  This explains the timeline I've described above before. Is there two days I used the Lightroom slideshow feature. The failure began after the use of the slideshow in Windows 10.

  One wonders why Adobe requires Apple software to run lightroom in Windows 10.

  Despite Apple and Adobe, you can install quicktime from the following link, it will work as well for Windows 10: http://tommynation.com/install-quicktime-windows-10/

  My problem seems closed.

  J.R. link

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• error window DDE server to stop

  I get an error of dde Server window when I stop. Sometimes, I had at the end of task nine times to a complete stop. Going in and out of Internet Explorer becomes very slow and sometimes crashes and I have to stop. I use XP for an operating system. Thanks for any help.

  Hi etwheels,

  Have you checked your System Event Viewer to see what is causing your system hanging on tap?
  If you can, copy and paste what you see in response so we can help you further.
  Can't wait to hear back on your part.

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• Windows 7 error: IRQL_NOT_LESS_OR_EQUAL Stop: 0x0000000A

  I have a laptop Dell Inspiron.

  I installed the OS from Vista to Windows 7

  I think that the upgrade successfully compleed... There was no failure I've seen during the upgrade.

  Immediately after the upgrade, reagardless of what app I'm running, I repeatidly receive the IRQL_NOT_LESS_OR_EQUAL Error in a few minutes.

  Hello

  1. which edition of Windows are you running?

  Example: Windows 7 Professional 64-bit

  2. When you receive this error message?

  Please follow the links below to solve the problem.

  
  Method 1

  Resolve stop (blue screen) error in Windows 7

  http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-

  Method 2
  Please download and install this fix to see if the problem is resolved.
  Stop error message when there is a request to allocate a large contiguous physical memory amount in Windows Server 2008 R2 or Windows 7: "Stop 0x000000A (IRQL_NOT_LESS_OR_EQUAL) error code.
  http://support.Microsoft.com/kb/979903
  Method 3
  
  Try to run in a clean boot state and look for errors.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  

  Note: please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.

  Please post the results of the resolution of the problems.

  I hope this helps.

• DVD stops playing, jump to a menu

  I have a video statement, third in a series. First two are already at the duplicator, they both work very well. The third is, uh, Act a little. :-(

  The video is a little over an hour of time. Source is 29.97 1920 x 1080 p. published in Agency cs6, AE, hearing cs6 cs6. There are 32 chapter markers, some of them used only to tell a playlist of chapter cs6 yet where is the end of a chapter. The target is widescreen DVD. Transcoded by SOUL cs6.

  There are four menus. The main menu includes buttons to 'play' and then three other menus. There is a chapter menu that is 'normal' that you choose a chapter to begin, and the video plays from there to the end. The other two menus to specify up to five chapters to play as a group chapter playlists.

  With this set of context, the problem is that when to put the physical DVD in a DVD player and press 'play' in the main menu, the video starts in Chapter 1, as it should be, then play until he reaches the fifth chapter marker, then it stops and goes to the Menu 4. It shouldn't do. It should simply play through the end of the video.

  It turns out that this chapter 4 marker (the marker just before where the trouble begins) is used in two playlists chapter - one used by 3 menu 4 Menu. Both have stock of end to return to their respective menus. Both play very well on the physical DVD. In the case of Menu 4, the chapter playlist contains just one chapter - when it hits 5 chapter markers, it stops and returns to the Menu 4. Sound familiar?

  So why this behavior of playlist chapter going outside a used chapter playlist? What can I do to get back my ability to play the video passing by?

  It seems that I can't do an end of chapter action be "undefined" once was defined.

  Choose Properties, and press the delete key. I think that it will be "undefined" it.

• Start or stop the conditional statement

  I have an animation that plays from the beginning to the end. I would like to add a conditional statement that

  IF the animation is to play and click the ANIMATION BUTTON, it stops and goes back to the framework.

  OTHERWISE (if the animation is on frame one (did not play) it starts to play the end.)

  My script goes like this-

  animation_btn.addEventListener (MouseEvent.CLICK, startplaying);

  function startplaying (event: MouseEvent); {} void

  Play();

  Animation.Play ();

  }

  the animation is the name of the animation time line.

  Your help is very appreciated.

  assuming that the movieclip you wish to order is the animation:

  animation_btn.addEventListener (MouseEvent.CLICK, startplaying);

  function startplaying (event: MouseEvent); {} void

  {if(animation.currentFrame==1)}

  Animation.Play ();

  } else {}

  animation.gotoAndStop (1);

  }

  }