Stop a signal to connect to the slot machine

Similar Questions

• Unable to connect to the virtual machine after adding new eSATA drive

  Hello.

  I'm trying to connect my new 2 TB drive in VMWare Workstation. It is connected via eSATA to the host computer, and it works. I added the drive to the desktop as a new "physical disk." But now I can not power the workstation the most.

  (1) when I start the VMWare Workstation it right ask admin (it didn't need before).

  (2) when I turn on the prompt does not charge even the bios. It shows a rear screen with the logo of VMWare for a while and then stop saying: "VMware Workstation cannot connect to the virtual machine. Make sure that you have the rights to run the program and access all directories that it uses and access rights to all directories for temporary files. »

  The host is running Windows 7 x 64. The workstation runs under the standard user account.

  Thank you.

  Hmmm - it's unexpected - works for me here - only difference: I tried with only 1 TB disks.

  You start Workstatiion as an administrator?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• whenever I have to connect to the virtual machine asks me to enter login and password I can't save the credentials

  Hi, I used Windows Virtual PC XP mode for awhile and I just do a fresh install, and I'm having a problem that I seem not to be able to solve.

  After you enable the integration features, I got to the Windows Security login screen. I typed in the login and the password, but I accidentally made a mistake and could not connect. I clicked on cancel and was then in the XP login screen, where I entered then the right login and password and it me connected to the virtual machine XP without problem.

  Now, the problem I have is every time I connect to computer virtual it asks me the login and the password on the login screen of XP and I don't have the option to connect using the login Windows Security screen, so it do not give me an option to save my password and login information. So, to make things worse is that moment every time I have to resize the virtual pc it then asks me to log in again.

  Is it possible to return me to the Windows security login screen where can I put my login instead of the XP login screen when it is not an option?

  Hi Richard,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• VMview unable to connect to the virtual machine

  The View agent reports that this
   LVL:1 RC:-500         : desktop is currently logging of
   LVL:1 RC:-500         :f a previous session. Please try
   LVL:1 RC:-500         : again later.
  

  If we deploy windows using VMware view XP machine. We have 2 samsung machine and when I connect to the first machine I have the login screen, but as soon as I hit the login on the second machine I get the error 'desktop's currently... ». repeated enter gives the same error.

  We use teradici management to deploy computers. right now the pool is to use 50 machines with 10 available all the time.

  You can change the settings of the pool to enable multiple desktops per user, or you can start to use unique user names.

• Not allowed to connect to the virtual machine after archive / installation of the Tiger

  I made an installation of archive / install OS 10.4 as part of the maintenance of the system. Today, VMware does not connect to the virtual machine and wants me to check my right to use the program and its directories.

  I recently bought VM Fusion and bought the license / registered. Something to do with installing the OS, maybe, but everything else works well.

  I don't have reinstall Fusion as part of the installation of archive / install.

  I would say that (this will not affect your VMS) because it is an easy thing to do and should decide on problems of permissions on the application itself.

• Disable the Internet connection for the virtual machine.

  Is it possible to disable the internet connection to the virtual machine from Windows XP with on the neutralization of him on my Mac?  I just want to connect to the internet if/when updates are required.  Any other time.

  I run Windows XP Pro SP1 on VMware Fusion v. 2.0.1

  You have a virtual NETWORK adapter, Fusion UI calls it just a network adapter (which, due to a bad design, choice flowing from the settings box, but it's another criticism for another time...) This screenshot shows a disconnected virtual NIC:

  

• "Unable to connect to MKS" when connecting to the virtual machine shared

  Hello

  I have a handful of Shared VMs Im trying to access remotely with VMware Workstation Pro 12 (same version on the client and the host - two Windows 10 machines). I am able to connect to the host that shares virtual machines, I can see all the virtual machines shared, open the virtual machine (as in it opens in a tab within the workstation) and virtually no action on the virtual machine including all power options, instant, change settings, etc.. The problem is that if I turn on a virtual computer (or connect to an existing virtual machine under tension, I get the following error and Im not able to access the actual console since it remains as a black screen.

  Unable to connect to the MKS: (name of user and password) Login incorrect.

  I also noticed that on the client Windows Event Viewer is to launch the following warning events at the same time that the error in the Workstation has been lifted - Im not seeing any on the host are thrown.

  

  

  I've seen a lot of posts here with users who run the question and he usually ended up being a network problem. I turned off the Windows Firewall on both machines, checked ports 443 and 902 listening on the host and Im in telnet from the client to the host on port 902. I also saw another suggestion for updating the client Windows hosts file to include [host name] [IP address] and [FQDN of the host name] [ip address], but this subject seems not helped either.

  Suggestions in this regard does not happen what keeps or where to find more information about the cause?

  Thank you!

  Post edited by: Tim Graffam

  Thank you for using the workstation. I think that this will solve your problem.

  Unable to connect to the MKS: (name of user and password) Login incorrect

• Unable to connect to the virtual machine via telnet

  Hi all

  The VM on Vcenter everything is perfect with the network connection. I can't do a ping of the virtual machine remotely but I can not connect via telnet.

  For the same reason? And even more, I have disabled the fiewalls of the virtual machine (Windows 2008 R2).

  The error that says: could not open connection to the host, on port 23: Connect failed

  Can you please let me know how to solve this problem?

  Since there is nothing blocking the traffic of the virtual machine in ESXi, you can begin troubleshooting in the guest OS. For example is running telnet server and configured to accept connections?

  André

• No network connection between the virtual machines on different hosts ESXi

  I have several 5.0 ESXi hosts in a cluster managed by vCenter Server 5 and I have network problems:

  1. [Host A] running a virtual machine can ping any other computer virtual running on the [host A] great!
  2. A virtual machine running on host [B] can ping any other virtual machine running on [B] home - very well!
  3. [host A] (from the ESXi console) can ping any virtual machine running on [B] home - even better!
  4. [B] home (from the ESXi console) can ping any virtual machine running [host A] - beautiful set!
  5. A virtual machine running [host A] can not ping any virtual computer running on host [B] and vice versa - bad, very bad!

  So basically the problem is that the virtual machines can communicate on hosts. It is a major problem that I need to fix, for obvious reasons.

  Networking on all hosts is configured exactly the same way: a unique and standard vSwitch with a pair of gigabit network cards grouped, vmkernels configured for the vMotion, NFS and network management and a group of ports configured for the VIRTUAL local area network used by the VMs. (vMotion works fine on hosts, storage vMotion works very well too.) All virtual machines are servers Windows (2003 and 2008).

  Reason #3 and #4 above, my assumption is that #5 must be the result of an ESXi/vCenter configuration issue and not a problem with the switches of material upstream. Is this a reasonable assumption?

  Whatever it is, can anyone offer suggestions on how can I fix? It is quite annoying as I'm pretty sure that these hosts are configured in the same manner as those of our production cluster, which does not at all these problems!

  Thanks in advance for any help you guys can provide.

  To be honest, it looks like a problem with your physical network-

  How is the physical network configured - are NIC connects it to the same physical switches? Are the virtual machines on the same subnet? If this is not the case, they are able to ping the gateway sbnet? Can you piing host IP address from the virtual machines?

  I also moved it to a forum more approiate.

• regarding the connection of the virtual machine to the external network

  Hi all

  I'm new to vmware and I have two virtual machines with windows operating system 7. How to connect to the external network?
  can I assign a NATed IP to them?

  If the need to talk about virtual computer internally, you can add all the VM in the same VSS(vswitch 1) at the same port group Network2 VLAN40. for virtual machines on that VLAN can communicate among themselves without problem and configure all virtual machines with IPs in VLAN40. no need for an another vs.

  For internet access, first check with your network administrator, if the VLAN has a routing or this VLAN has access to the DNS server that provide internet or the proxy server for internet access. He will confirm. or you can also check if this virtual machine are able to ping your DNS server or proxy servers. If its power of ping so it has access to this network. Configure the virtual machines that you configure a physical computer for internet access.

  If the VLAN has access to the internet, even that you configure the physical server with connection DNS and proxy for internet access only the configuraiton even here too in the virtual machine.

• Unable to connect to the virtual machine after they are created

  I installed VMware view and connected to my server Vcenter. Composer, I installed the server vcenter and View manager recognizes it.

  I created a virtual Windows Vista machine, is joined to the domain and instant, it.

  I then created a persistent office pool and allowed users to access.  I can see the virtual machine created the VCenter

  However, the view Client cannot access the virtual machine (he can see the office pool) bit tells me that the customer is not available.

  Any ideas on what I missed?

  Go to the desktop the pool in view Administrator resources and check the status, it should say "Ready".  If this is not the one usually means that there is something blocking the port 4001 of the agent on the view connection server.  I got this when deploying a pool on a different subnet and there is a network between the areas of the network firewall.  The Vista firewall can sometimes be reset on the deployed virtual check computer so who has not been reactivated and adjust the GPO if necessary.

• my digital TV show no signal when connected to the hdmi to my hplaptop port

  I plugged the hdmi to HDTV cable end and the other end to the hdmi port to my laptop HP in the off-mode, then I turned the laptop and the tv on and seledted in my TV HDMI input signal. After that a few seconds tv monitor displays the data recovery then it comed no signal .do I need to make changes in my hplaptop pls help to solve this problem. Thank you.

  Hi spkmd,

  Follow these methods.

  Method 1: Check with the manufacturer for the software update of the HDMI driver.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2: There may be a combination of keys on the laptop to change to HDMI manually, usually a FN + F # combination. You'll need to refer to the documentation for the laptop to which key can control the HDMI. Also, check the manual that came with the TV.

  Method 3: You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  (a) click Start, then Panel.

  (b) click appearance and themes, and then click display.

  (c) in the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.

  (d) click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link:

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• CC update stops at 2%, that connection to the server will be composed

  Hello

  Help, please! I have no idea of what the error!

  Thank you

  Please try to remove cloud creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html