'Stop' trigger does not work...

Similar Questions

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().

• Partial trigger does not work with the Panel group layout using ADF 11 g.

  Friends,
  
  I have a requirment, based on the value of < af:selectBooleanCheckbox > I make < af:panelGroupLayout > dynamically. If the box is checked, so I have to show available to the Group Panel, otherwise not. The problem that I face here is trigger partial does not work, if I check the Boolean box and refresh the page, then I see that it works. If I refresh the page I don't see that it works as expected.
  
  Here is the code snippet
  
  < af:selectBooleanCheckbox value = "#{bindings." ChkBoolean.inputValue}.
  shortDesc = "#{bindings." OtherOptChk.hints.tooltip}.
  ID = "OtherOpt" immediate = "true" autoSubmit = 'true '.
  / >
  
  < af:panelGroupLayout id = "pgl11" partialTriggers = "ChkBoolean".
  rendering = "#{bindings." ChkBoolean.inputValue} "" >
  
  I'm doing something wrong here
  
  Thanks in advance

  The problem is that you use the rendered attribute. This attribute is false, the component is not rendered on the page and you cannot make visible because she's not here.
  Use the visible attribute.

  Timo

• After that insert update trigger does not work properly

  Hello experts!
  
  I created an insert/update trigger after and what strikes me is that it does not work as expected.
  The trigger starts a procedure that performs an insert in a second case of changing values table triggered table ("my_table").
  
  The problem is that in my second table values, which are correlated to the "my_table", are not changed by the correct values immediately. The trails of the trigger and insert!
  
  I need to update two times to values appear in my second table. Then only the data of the first update will be inserted in the second recital to table the table parent ("my_table") held the most recent values.
  
  Do you have an idea what could be the problem?
  

  create or replace
  trigger myscheme.after_update_insert_set_tw
   after update or insert
    on myscheme.my_table
    for each row
    
  declare 
  
  begin
  
   pr_my_table_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling, :new.objectid);
  
  
  end;

  Brgds,
  
  SEB

  Remove the pragma autonomous_transaction and validation of your relaxation. This might be the reason. The transaction autonoumous cant properly consider the values of the current transaction (which is not engaged yet).

  This is not logically (if the upgrade fails or is rolled at the time you do not want the inserted row).

  If you then get a problem because the mutation of tables, you will need a different solution: an autonoumous transaction is not the right solution to workaround.

• I can't get adobe to work and when I look in ms confing is shows that it is stopped and does not work how can I run past

  i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Why this simple trigger does not work?

  For one of our Test environments, I was asked to implement a trigger which limits users based on ip.
  IP addresses of eligible users is stored in the maint.ip_dtls table. But, does not seem the trigger to trigger the application error and reject the connection when a user with an IP address that is not present in the table ip_dtls try to connect.
  

  create or replace trigger sys.testlogon after logon on database
  declare
  v_ipadd varchar2(100);
  ip_exists number;
  
  begin
  -- Getting the IP
  select sys_context('USERENV','IP_ADDRESS') into v_ipadd from dual ;
  select count(*) into ip_exists from maint.ip_dtls where ip = v_ipadd;
  
  if ip_exists = 0
     then raise no_data_found;
  end if;
  
  exception
  when no_data_found then
  raise_application_error (-20103, 'Insufficient privileges to login');
  
  end ;
  /

  The code works when tested from an anonymous block.
  
  Published by: Steve_74 on November 25, 2010 06:36

  Probably the fact that you create the trigger in the SYS schema could cause problems.
  Have you tried to create the trigger in another schema/as another user?
  SYS (and SYSTEM) belong to Oracle, and you should not create objects in the schema.

  Edit
  See:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:3236035522926

  Published by: hoek on November 25, 2010 15:53

• After delete trigger does not work

  Hi all
  I wrote the trigger
  
  who does not
  

  CREATE OR REPLACE TRIGGER DELETE_HR_API_TRANS_TRIGGER
      AFTER DELETE
          ON hr_api_transactions
          FOR EACH ROW
          WHEN ( NEW.transaction_ref_table = 'PER_ALL_VACANCIES' )
  BEGIN
      
      xx_GL_Vacancies.delete_transaction(:OLD.transaction_id);
  END;

  his compilation succesfully
  but nothing bad happened on the tables
  
  I think there is problem in

  : OLD.transaction_id

  Have you added the COMMIT in your stand-alone procedure xx_GL_Vacancies.delete_transaction?

• Date - when formatting a Date using html code stopped by does not work

  I have something like this:
  -case when (STORE_RCV_DATE-order_date) > 21 then
  < F were color = "#FF6600" > < B > "| STORE_RCV_DATE | "< /B > < / make >
  Else < F were color = "#FF6600" > < B > "| STORE_RCV_DATE | "< /B > < / make >
  END STORE_D
  
  In the report, when I try to order by, it is no more considered a Date but as string, the order of looks like:
  
  29 March 09
  January 24 09
  23 March 09
  23 February 09
  22 December 08
  21 May 09
  20 February 09
  20 February 09
  
  
  Considering only the day, but not the month.
  
  I can solve this? or I can put my somewhereelse condition so it does not change the date to a string column?
  
  Thank you.
  
  Published by: Nera on June 15, 2009 07:01
  
  Published by: Nera on June 15, 2009 07:01
  
  Published by: Nera on June 15, 2009 07:02

  Html comment to ensure the correct channel you are ordering:
  -case when (STORE_RCV_DATE-order_date) > 21 then
  ''''|| STORE_RCV_DATE | "Else " | STORE_RCV_DATE | "END STORE_D.

• Stop button does not work.

  Hello. How to stop the vi by using the button on the front? I tried to use stop button inside while loop but when vi is running, and if I press the button on the front of the vi will not stop. I have to stop manually. My vi have two structures of the event. I even tried to leave buton. The button remains pressed, but vi is stopDoes the program wait until both executed for the button stop working.

  I have attatched different variation of vi.

  Thank you.

  You need only a structure of the event in your program.  Add an event to it press the button exit and stop your loop with the same.

  Delete the sequence structure.  It is not necessary.

  Move your init function VISA outside the while loop because you only need to do once.

  Move the VISA close outside the while loop.  You only need to do once.

  NEVER use the Labview output function.

• Really simple question, function and scroll stop bar does not work

  I worked on different parts of this VI separately, when I put it together the scroll bar and stop working stopped button.

  In the individual VI, both are in the while loop. In the end, I was a scroll bar and a stop to apply every 5 while loops.

  I tried to take the helm of scrolling in and out of the first loop to attach to the rest, but it still doesn't work.

  I'm sure that there is a simple answer that is really stupid, but I played with him for a while.

  I have attached the VI am I train both to false data (in order to test the colored boxes).

  Thank you!

  You have a typical problem of beginner because of the lack of understanding of data flow. Run the code using execution highlighting, and look at the diagram to see.

  1. Your stop is outside any loop and so will be read only by the code only once at the beginning of the program.
  2. Your scroll bar is read in the first loop. All the other loops cannot begin until the first loop finished and since (1) is true, it will never happen if the value Boolean false when the code begins.

  Why do you have so much code duplication? 95% of the code for the loop is the same and can be reused. I don't know that the whole thing could be written using 5% of the total code. Put everything in a loop, iterate over the table 2D to get all values. Don't forget to put a little wait inside the while loop.

• How can I stop Vista Service Pack 1 download... its stuck at 83% and clicking stop installation does not work

  How can I stop Vista Service Pack 1 download?  I tried to download the service pack one and its deadlock in 83%...after 5 hours I hit stop installation, but it just gray out and don't stop - I'm afraid to restart because don't know what will happen.  Help, please... I think that probably Norton it stopped completely download so I'm cutting of norton, but nothing is happening because I think that the serivce pack is stuck in the loop.  Any advice would be greatly apprecaited.  Can I reboot? Can I go back to a restore point?  Thank you

  Hello

  This problem may be due to Norton or other software. You can restart the computer and check. If all goes well, you should be able to boot to the desktop without any problem.
  The error message in the event viewer can point to the program which caused this problem.

  Reference:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in the event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can download the latest service pack using the article below and verify if you are able to install it.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

• the stop button does not respond when I needed to stop a program

  I want my labview program to stop when I press the stop button, but this isn't the case... stop button does not work... I have used a loop in which there is event structure n structures case... I have attached my file... so please help me...

  Hello

  In your code, this can be done by using the new event on "Stop" button when press it it will give a true

  Like this

  

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.