stop at registration of the modules during installation of QTP
I m unable to install QTP 9.2 in my system, while the installation stops at "registration mododule", and he never goes thru
Hi Pragya22,
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if you can install the program on the computer.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Tags: Windows
Similar Questions
-
SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?
Update Firefox 23.0 which published yesterday afternoon.
-
Original title: Constanr Error Message at startup.
When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?
Open log on to Windows as administrator or an account with administrator rights.
Click Start | All programs | Accessories | System Tools, and then click System Restore.Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)
may already be selected), then click Next.
In her select a Restore Point window, use the calendar to select a date before the day of the change or problem oNext.
Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
In the page confirm the Restore Point selection, click Next.
System Restore will now restore Windows XP configuration, and then restart the computer.Finally log on to the computer (using the same Admin account).
The system restore restoration complete 'window' is displayed.
Click OK.Your fact restore the PC to the point in time, you have selected.
J W Stuart: http://www.pagestart.com
-
By specifying the host name for the database during installation
I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
Published by: user4928701 on July 8, 2011 23:15user4928701 wrote:
I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.Published by: user4928701 on July 8, 2011 23:15
lsnrctl stop
move/rename listener.ora to new/other file name
lsnrctl start
-
How to rotate the IPAD during installation (down key does not)
Hi, I have an old 1st generation IPAD where the bottom 10% of the screen no longer works. I tried to reset the IPAD, but now I'm stuck on the screen "to accept the license. Is there a way to get around this? Can I rotate the screen at this time?
Thank you
Hi Icetbr,
What a great iPad model you have there! If you already tried to change the orientation of the screen during the initial installation without success, then you will not be able to turn right there. But no worries. You may be able to activate the Zoom feature during the installation process that will allow you to access the agreement to license button. Also, given that you have problems with the display, you should consider having repaired to your Apple local store or service center. The steps and the links below will help you activate the Zoom feature as well as to get some great info to get your iPad repaired if you choose to.
When you turn on your iPhone, iPad or iPod touch for the first time, you can quickly activate VoiceOver or Zoom for you help to set up your device. Here's how:
Zoom
To activate the Zoom, use three fingers and double-tap the screen.
To increase the Zoom level, use three fingers to double - tap and hold, and then move your fingers upward or downward on the screen to increase or decrease the magnification.Use the accessibility features in iOS
Thank you for using communities of Apple Support. Have a great day.
-
Original title: XP hang up to the restoration of the system during the installation
During the configuration of the system in the process of getting XP to hung up on the screen of the system restore
The message says:No changes have been made to your computerTo choose another restore point, restart System RestoreTo restart System Restore, click HomeThe jury of the mouse and the button doesn't work so I can't click Home tabHelpHello
Why you try to run the system restore?
Step 1: Check if you are able to complete the restore of the system in safe mode.
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427For more information, please see the following article.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
-
Google Chrome could not connect to the network during installation...
Currently I use maybe obsolete google chrome... But when I download the newest chrome and during installation... it could not connect to the network or internet connection so prevented me to install the new chrome... What's the problem? and how do it fix it? Thank you
Try to download the full installer:
-
I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:
Intel Pentium D 3.40 GHz 3.39 GHz
3.5 GB RAM
I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;
"To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."
What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?
Help, please. Thank you. :)
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
iPhone app does not display the icon during installation
Hello
We have developed an iPhone application using flash builder. We used the following icons of the resolution.
<>icon
< image29x29 > assets/images/x_29px.png < / image29x29 >
< image57x57 > assets/images/x_57px.png < / image57x57 >
< image72x72 > assets/images/x_72px.png < / image72x72 >
< image114x114 > assets/images/x_114px.png < / image114x114 >
< image128x128 > assets/images/x_128px.png < / image128x128 >
< image512x512 > assets/images/x_512x512.png < / image512x512 >
< / icon >
The icon appears correctly in iTunes and also icon in the device after installation. but the problem is during the installation of the application in the device, it is show Virgin icon.
The app is only specific to iPhone devices. for example,.
< iPhone >
< InfoAdditions >
<! [CDATA]
< key > UIDeviceFamily < / key >
< table >
< string > 1 < / string >
< / array >
[]] >
< / InfoAdditions >
< requestedDisplayResolution > top < / requestedDisplayResolution >
< / iPhone >
Please help me how to display the icon during the installation of the specific application of the iPhone.
Hello
The icon is not displayed during the installation of the application of the ad hoc package. Now, we have published (same code game) app in the Apple iStore and no problem icon with the distributed version (the application that's iStore).
Thank you
Chandrashekarreddy Muthumula
-
Black image to develop the module during the use of acceleration GPU on Macbook Pro
Since the update of Lightroom 6.6, I was see the "bug of the black image" to develop the module still very frequently.
Basically, 1/3 of my photos appear black when you view in the develop module.
If I select 'View', 'Before', the original is displayed correctly, when switching to "After" it becomes black. Even in mode split the side "Before" picture, the side is 'After' is black.
If I play with some settings and select 'Auto' the image appears correctly again.
If I disable GPU acceleration, then all images are displayed correctly, but I would use the GPU acceleration.
Any ideas how to fix?
Is there some sort of connection that I could activate that help you solve the bug?
Lightroom version: 6.6 [1078672]
License: Perpetual
Operating system: Mac OS 10
Version: 10.11 [4]
Application architecture: x 64
Number of logical processors: 8
Processor speed: 2.5 GHz
Built-in memory: 16 384.0 MB
Graphic processor News:
AMD Radeon R9 M370X OpenGL engine
Check the supported OpenGL: past
Vendor: ATI Technologies Inc.
Version: 4.1 ATI - 1.42.6
Renderer: AMD Radeon R9 M370X OpenGL engine
LanguageVersion: 4.10
The issue will be probably set with 6.6.1 or 6.7 - when - knows only Adobe.
Until then your solution is to disable the GPU acceleration or roll back to 6.5.1. Are you using a 4 k or more display? If this isn't the case, I guess you don't see no gain in performance in any case, don't you?
Here's how: How do I roll back to Lightroom 2015.1.1 or Lightroom 6.1.1? Lightroom Queen
Just replace 6.1.1 by 6.5.1.
-
grid cannot discover the DSO during installation disks
Hi all
I want to install grid 11 GR 2, but creating disc ASM, it cannot find disc asm which I see at the level of the bone on both nodes using /etc/init.d/oracleasm listdisks
and the result is
ASMVOL1
ASMVOL2
ASMVOL3
but I do not see these disk at the time of installation of the grid. I am running Redhat linux 5.3
Thanks in advancexuv500 wrote:
Hey RafiYes I use asmlib.but sorry m new m for the asm and RAC.can u tell me where I can get this setting
First of all, use good words. This isn't a forum to chat so avoid using "u", "m".
How you set up your devices in the first place? Are you a person as a result of a document? If so, please specify its url here. You need to configure permission for devices before that ASM can see and if the devices are not to be displayed in the installation program, most likely, that the reason is that the authorization.
Aman...
-
Re-Setup does not continue after the reboot during installation
I am trying to install windows vista on my laptop for a USB DRIVE.
1. that I start my USB drive
2. Enter the language settings
3. choose clean install
4. reformat my drive
5. Windows Installer files & then restarts
6. I get an error indicating that some vmsraid file is missing!SO I think that the boot manager not continues on the installation after restart! Why the hell vista needs to restart during the installation!
PS > before starting the whole installation procedure, I got a similar error saying a file was missing
and just for the knowledge base: vista worked FINE until I visited a site and got a paladin antivirus and then I tried a lot of things and I saw a startup folder and in it, there are AB, records etc. AC, which I think would have been absurd so I tried to delete the thembut they wouldn't, so I renamed the startup folder and ffff. and then from then on, I got an error after a reboot! so I decided to do a clean install of vista!
Hello shez1983,
Yes, if you have a 3 GB of RAM on your computer and 2 sticks. You can try to remove one of the RAM stick and check if the installation goes through.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
'A problem occurred during extraction of the files' during installation - Adobe CS6
I downloaded both the DesignWebPremium_CS6_LS16 on my computer Windows 7 Pro and when I run the exe, it gives me the error "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. When I click OK another message comes up with ' a problem occurred during extraction of archive. ". Please try to download the Adobe CS6 Design and Web Premium again'. Any ideas?
- The computer has 128 GB of space
- I downloaded the software twice
- I tried to extract to the desktop "C:\Users\Brad\Desktop\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin
- I tried to extract to the desktop "C:\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin
Hello
Please see the following links:
Troubleshoot installation with the log files. CS5, CS5.5, CS6
Installation and launch log errors | CS5, CS5.5, CS6
The know us if that helps.
Kind regards
Bani
-
Configuration of the network during installation Linux4 update5
Hi all
I would appreciate if someone could help me with a problem I have.
I want to install Oracle Apps 12.1.1 on update Linux4 5 on my own PC. It would not be any other OS on this system so that the system would not for Oracle applications.
I refer to the following website to know how to install Linux for Oracle.
http://appsdba.info/docs/oracle_apps/RedHat/oel4.PDF
According to this document, I should get a screen to set network configuration which I did not. I thought that it would be not only important to configure the network so I worry when I don't have it. But after installing Linux, I couldn't connect to the Internet. Someone told me about a successful Oracle Linux applications, installation you must have internet working!
Is someone can you please tell me why I don't get the network configuration screen during the installation of Linux? OR if there is no other better way to set up the network? I am a beginner in installation of Linux and Oracle, and need some more will certainly help in the future. Thanks a lot for your help in advance.
Kind regards
AnshulAccording to this document, I should get a screen to set network configuration which I did not. I thought that it would be not only important to configure the network so I worry when I don't have it.
Didn't get what? What stage are you talking?
What is the entry that you have in the file/etc/hosts? What is the output of "ifconfig - a"?
But after installing Linux, I couldn't connect to the Internet. Someone told me about a successful Oracle Linux applications, installation you must have internet working!
That's not true, and you don't need to have an internet connection for Oracle EBS work. However, if you install on a virtual machine, you should be able to access the internet from the computer asked if the host computer is connected to the internet.
Is someone can you please tell me why I don't get the network configuration screen during the installation of Linux? OR if there is no other better way to set up the network? I am a beginner in installation of Linux and Oracle, and need some more will certainly help in the future. Thanks a lot for your help in advance.
Again, thank you for mentioning the steps you are talking (including the page number).
Have you reviewed the steps described in the official Oracle EBS Installation documentation?
Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]Thank you
Hussein -
How to past the EULA during installation of Windows XP?
Cannot install Windows XP Home Edition
I get upgraded my PC. All new cases, PSU, mobo and CPU, new SATA HDD and optical drives earlier transferred/installed.
I tried to install Win XP Home, using my original installation disk on my new PC. The CD goes to "Windows Setup" and asks me if I want to:
Install Windows XP Home Edition, press ENTER
Repair a Windows XP installation using Recovery Console, press r.
or, to exit without installing Windows XP, press F3
I press ENTER. After a second or two to the top appears the EULA screen. However, there is no way to continue beyond the info of the EULA. You can previous page or next page. Read the EULA contract. However, there is no apparent way to continue beyond that. If I hit ESC, the program (Setup, screen EULA) is exitted, indicating that the computer will reboot in 15 seconds and that Windows XP was not installed. It will reboot, and finally, through the same actions, I'll be back to the EULA screen, where he has just the same.
Why not install my Windows XP Home Edition (SP2) on my PC original newly built?
Hello
This part is where you're supposed to press F8 to accept the Windows XP licensing agreement before moving on to the next window.
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1_5.htm
See you soon.
Maybe you are looking for
-
some characters on the keyboard does not not after installation of macos sierra
keys on one side does not not after installing sierra on my mac pro book
-
Alternative to the HLOOKUP function?
Hello I'm trying to find the heading of column title if a given value is somewhere in a row. HLOOKUP can't be used because it doesen't work with an index of the negative line. Ideas for an alternative? That's what I'm doing: It is a matrix: The heade
-
Double beep at regular intervals on Satellite P100 series
HelloI just bought a Satellite P100 laptop.The laptop makes a double beep every few minutes, even if I unplug the power.When I disable, the ringing continues.The speakers do not seem to work, even if the volume settings are all on. Thank you for the
-
Recover data without the Bitlocker recovery key
Hello Nice day! Kindly help me to retrieve the files of one of our responsible, something went wrong with his laptop and the seller replaced the MoBo. But worse, is that the drive is encrypted Bitlock, when we tried to start it in boot drive failure,
-
How can I designate hotmail as my email popup rather than Outlook?
When I want to reply to an email, I am taken to Outlook rather than hotmail. How can I change this?