Stop opening the Panel "CC Libraries" at startup
Hi guys,.
How to stop CC libraries to arise whenever you open InDesign CC? Screenshot attached. It happens every time, although not part of my workspace and is not open when leaving InDesign.
Sought in the forums, but failed to address this problem. This article details a few answers, but nothing definite. Anyone succeeded?
For reference: I've disabled 'Add to the CC library' when creating new samples / Character Styles / paragraph Styles. My InDesign is a clean install of the latest version (2015.4) and it continues to be.
Nothing of this Sierra above worked, but today after the installation of macOS (on El Capitan), the problem was instantly before disappeared.
No idea why this would fix it, but nevertheless leaving HERE case someone else has the same problem.
Tags: InDesign
Similar Questions
-
How to open the Panel styles css
How to open the Panel styles css in dreamweaver cc 2014. I looked at other ways to do like go to the window, then the css styles, but he's not here.
Help, please. Thank you
In 2014 the CC, it should always be available by opening the window designer CSS > CSS designer to hit Ctrl + Alt + Shift + P and then however it probably isn't as fully functional Panel such as DWCS6.
He has also removed completely new versions of the program and replaced with CSS designer.
-
The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty? How can I access the apps?
The solution seems simpler than city above: reinstall the creative Cloud application. When he finally set in the Finder (Mac) you ' he's opinion - down under - that "synchronize file is paused. Click on the small triangle on the right and the problem is solved - or it was for me.
Concerning
-
Y at - it a keyboard shortcut to open the Panel layers?
I Googled, searched discussions and tried actions registration but have not found the solution.
What I would like is a simple keyboard shortcut to open the Panel layers.
That's all.
I can create and perform actions which create, delete or move channels; Use the menu tab or channels to open it - but I can't seem to find a way to use a key combination to open the Panel layers as you can do for the layers (F7) or actions (F9) boards.
Someone has an idea?
Thank you!
-Bonnie
You can assign a shortcut using Edit > keyboard shortcuts > application menu >
Window > channels.
MTSTUNER
-
Open the Panel before Subvi in the executable
Hello
In my labview project the MainVI contains about 20 subVIs. My goal is that by clicking on a button on the Panel before the main VI I would open a special Subvi (assuming it to be sub - VI, 10). To do this in the labview development environment, I used a reference of openVI with its path of entry is the name of the VI vi I want to throw (Subvi 10), and then set a real constant on the front panel to bring up the control panel front of the Subvi. This works well in the labview development environment, but when I create an executable file I'm not able to open my Subvi. I looked around, on the knowledge base and found this article.
http://digital.ni.com/public.nsf/allkb/24F54CF34391074D862570E6005857DE. But this talk article to launch the front each time the Subvi is called. This does not work in my case, because sometimes the user may not want to launch the Subvi. I also have a lot of controls and indicators on the Subvi, so there is no way I can get that on the main VI as she would not clutter on the main VI.
In the property settings for the building of the executable under the category of settings of the Source file, I see the option Panel before removing the dependencies, but it does not set the option for the Subvi individually. Only together, I can remove the front panel for all content items. If no help on how to solve this problem is greatly appreciated.
Have you tried to use static references VI instead of using 'VI open' with a file path? With a static reference VI, the compiler has a better idea on what you are trying to accomplish during the execution.
I did it in before executables without any problem. Personally, I like having a Boolean input of the Subvi, called "Display window" (or something like that) and then have the Subvi manage how it wants to open (or close) front panel.
It has more than this past... the code snippet a little caught of freedoms.
It is within the Subvi (which my main VI is still running). The Subvi has a static reference to himself. I have a button on the front of my VI main panel when you press on sends a 'true' to Boolean entry "display window. The Subvi responds by opening the front panel upward. The opposite happens when the button is pressed.
This code was compiled in many executables and works without any problem.
Edit: Image cropped. This Boolean coming is "First Call". The function retrieves LV 2009 done this 'error 2' terminal. Laughing out loud. I wouldn't name which.
-
Open the Panel front of the Subvi, which is called by reference in the EXE
I want to open the façade of a Subvi when it is called. This sub - VI will open the façade of a Subvi third level. So, I want to go back to the main.vi the output of the subVIs.
I can do successfully in the development environment.
I call on the reference asynchornously screws. If the screw load when they are called and the calling VI awaits the release of the subvi.I am attaching the screenshot of the window subVIs properties customize.
When I build the application, the executable file could not be opened the Subvi front panel, even if the paths of the subVIs are related.
I also put the subVIs in the field "Always included" the build properties and the box "Remove front panel" is not selected.
I join the project and screenshots of the parameters.
If you had used the dialogues of error, you would have seen the paths of access to the VIs you build are not valid. The screws are always included in the EXE file, so you don't have to do any special stripping of the VI EXE path. A fake wire to your case structure determine the path, and it works perfectly.
Just dual-band is the path if you try to get the EXE directory.
-
Open the Panel before the sub vi when called - how?
Hello
I have a VI with several sub live
I want VI sup front panels to open, if they are not open yet and if they are called, but I want to stay in the shadows.
There are two configurations of node Subvi: 'Open the front panel when loading' and ' display the front panel when it is called.
The two are not what I want. If I select ' display the front panel when it is called ', then the front panels are open but flickering because they are called often, and alternating.
Yes! All right, it works now! :-)
Thank you very much!
-
type of screwdriver to open the Panel side cq5011
Hello
I would like to know what kind of screwdriver (size and type) that I have to open the side panel of my new compaq cq5011 (more precisely a cq5011es) (if I can improve some hardware in the future). There is only one screw, but I do not recognize the type (resembles a mixture between a flat screw and something else, but I don't want to use the wrong screwdriver and damage the head) and the manuals do not specify the right screwdriver.
Kind regards.
Video and instructions.
http://support.HP.com/us-en/document/c01700714
If you don't succeed the first time.
Well,.
So much for skydiving. -
How to open the Panel rear Dell Precision M4600
I want to open the back of the Dell Precision M4600 Panel so that I can increase the RAM and also put in a secondary hard drive. There is no documentation or a tutorial for that. Anyone can provide and guide on how to do it? I can't remove the battery, but here I'm lost. I see 2 screws on the back rear panel, but I don't know if it's the right screw to remove.
Any help is appreciated.
EDIT: Found the manual!
ADMIN NOTE: broken link has been removed from this post by Dell >
To add to the post of urlnotfound:
Remove the two screws under the battery holding the lid.
Slide, sometimes with a bit of force, the cover backward toward the back of the laptop. Only, he moves about 1/4 "and is free to raise at this time here.
Note that there is only a single 2.5 "HDD place, and it's the hot-swapable one you see on the side (still to figure out how to remove it, level didn't seem to do anything - for the moment). "2nd HARD drive" is actually a dedicated slot 'mSATA', which means minicards SATA. It's a tiny, as the three PCI-express slot you see when you remove the cover. They are very rare to buy the property. I really wish that I bought a Dell offered, aftermarket cause they are next to the non-existent. I found only 2 manufacturers, which are the same brands under the hood. But they are only the size of 50mm. I want a site of 70mm slit in the WWLAN PCI-Express slot, cause those are available up to 240 GB.
And FYI, devices with SATA II interfaces mSATA can get up to 240 to 250 MB/s read/write! No, there are no mSATA SATA III that I could find. Wanted for a month for them...
Note also that only two senior RAM sticks are available here. I'm about to call Dell support for where are the othe two DIMM slots (very probably have to remove the background map).
-
How to open the Panel of render 3D PS CS6 settings?
Hi all;
PLS, take a look here:
http://helpx.Adobe.com/NL/Photoshop/using/3D-Panel-settings-Photoshop-extended.html
Its the lower panel, I mean, where the tools are found in CS5 are in the Toolbox.
Thank you
Maarten
Say that you are a donut.
Open the 3D Donut Panel material and select.
Open the new properties panel (I guess that's what his calles in English) and yu are.
Maarten
-
Open the Panel fails every time
I get a msg of error in Ps (CC2015 with all updates)
Everything else in the Ps works fine
If I try to open the file menu or ctrl + O I get this error window:
The % CCX_OPEN_PANEL name extension could not be loaded because it was not properly signed.
How to fix? Very annoying because it also makes the blocking of the Ps and I have to kill the program. All the usual signs are hidden, Ps window remains empty except for the error window. Will not go back to the normal user page setup as when the Ps started. Cannot force Ps to reply all.
My solution is to not use file open the file but drag .psd (or other such as jpg) to Ps window. that works very well... it isn't files
List of recent files works OK
Bug? or an easy fix in Ps or OS (win7pro x 64)
PS I found the function to open the file worked a long time ago, but it was heavy in the new shape... there at - it a setting pref to turn off of ""?
Workspace by uncheck see the recent files. ; Restart Ps = problem solved.
List of recent files still work
Now open the file opens as he did before... Operating system file/folder window.
I don't have spend start Ps to reset the prefs.
THANKS for the help.
Doug
-
Im trying to open the Panel configuration, but windows stops when I click it.
Why when I try to open my windows control panel stops and restarts?
Hello
What antivirus/antispyware/security products you have on your machine? Include everything you
ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
questions.)Search all .cpl files most will be in "C:\Windows\System32" However, you can have
others. Click on each of them at a time and see if it does not start - if so right click on it and
Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
not be judged because they are not active.)Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl
and others.Try these in case the General corruption has a role to play:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------
Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
or games in Windows Vista
http://support.Microsoft.com/kb/936686/en-usThe Control Panel window will not open in Windows Vista
http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htmIt was reported a updated driver he blocked as well, if you have updated
drivers lately? Also check the driver updates in Windows Updates.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Whenever I open a document in the tools Panel is taking up much of the space. Of course, it is easy to close. But I don't want to open in the first place. I can't find anything in the preferences to stop everything. Each search as "Panel tools in Acrobat reader DC" is rejected by the site as "too long" (?). Any thoughts? Simon
It's been updated! Please see hide the tools Panel in Acrobat and Acrobat Reader DC at all times.
Best,
Sara
-
APPCRASH Windows Explorer - message of Windows work stopped in the Panel
Hello. My husband is currently deployed and I'm looking for help to fix my daughters computer. We have Windows Vista Ultimate Edition.
I'm having hard time making that wireless internet is connected, so when I go into the control panel to verify that it is enabled, a "Windows Explorer has stopped working" message as soon as I enter the control panel. As I discovered the details of the problem:
Signature of the problem:
Problem event name: APPCRASH
Application name: Explorer.EXE
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: CTMLFX32.dll
Fault Module Version: 1.0.4.0
Timestamp of Module error: 483f9682
Exception code: c0000005
Exception offset: 000094c 5
OS version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Any help/suggestions would be greatly appreciated!
Fault Module name: CTMLFX32.dll
Fault Module Version: 1.0.4.0Hello
This DLL causes the crash of Solution Explorer. From what I see, this DLL is part of Creative sound card drivers. So, to make a driver update.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Hello!
I am new to adobe photoshop elements 9. I'm trying to open a channel Panel but I can't to spotted. It's not near my layers panel and there is no option under the 'window' for the channel at all. What I am doing wrong?Thank you
Laura
lauraszanto wrote:
Hello!
I am new to adobe photoshop elements 9. I'm trying to open a channel Panel but I can't to spotted. It's not near my layers panel and there is no option under the 'window' for the channel at all. What I am doing wrong?Thank you
Laura
The "layers" Panel does not exist in one of the versions of the components. This is a feature of the full Photoshop.
Maybe you are looking for
-
Re: Question about administrator rights
Hello I downloaded Google Earth, but my laptop has been slow v because I did and I want to remove it. When I tried, the error message says that I must be an administrator to delete it.But I am a single user, not on a network. I use WIndows Vista. Any
-
How can I reset my laserjet p1102w to its defaults
The falts of software install and tells me to reset the printer to defalts. How can I do this?
-
Is it possible to see if a Subvi has something connected to a Terminal?
If I have a sub vi within a main program and the terminal is not necessary. Is there a way to know if something is connected to the Terminal?
-
How can I Poster Print with photosmart 7520
I am a poster and I used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How can I post print with photosmart 7520 use eprint and if not what can I use use the USB cord for poster printing?
-
How can I update my system registry for Flipshare software?
I tried to download the flipshare software and have had problems. The site of camera Flip told me I need to update my Windows registry database.