Stop or go to bed, internet wireless satellite P750 disappear

It is weired so I'll start from the top. I just got this baby a few months ago so I don't know what is happening.

Whenever it is idle and shuts down or goes to sleep, wake up;
internet access is charged again.
hardware radio switch is off so not networking

Now I'll adapters from device network/crèche and right-click Intel(r) WiFi Link 1000 BGN, then properties then advanced. From there on, I opened Mode 802.1 1n and enable or disable, depending on what I did the last time. So I'm able to activate the WiFi.

But as soon as he fell asleep or stops, the same problem arises. It was so bad, I have the Device Manager in my taskbar for easy access.

My husband and I are the only ones on this network. Requires access to the internet while my computer is asleep. What can I do to remedy this?

I might add, this problem started a couple of weeks. I don't remember anything to get there. I've been on a lot of forums. Nobody seems to have an answer. (X-)

BTW, I have Win7. What I wouldn't do to have XP back.

The wireless network must be enabled using the FN + F8 key combination.
Did you use or try this in order to activate the WiFi network?

Of my knowledge using this key combination should be good enough to get the active Wlan.

By the way: try to update the WLan driver
Here's the latest drivers available on the Toshiba WLan Portal:
http://APS2.toshiba-tro.de/WLAN/

Tags: Toshiba

Similar Questions

  • Need a card better wireless Satellite P750

    Following my grief with wireless Intel 6235 in the thread below card I am looking for a replacement card WiFi Bluetooth, which has the best WiFi reception that card Atheros OEM. Suggestions please.

    At soon Simon

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71711&TSTART=0

    Problem is that Toshiba doesn't support these upgrades. Each cell has specific hardware platform with some hardware components. All preinstalled Toshiba specific and utility tools are adapted and tested with him so there are not many possibilities to change hardware except HDD, ODD or RAM.

    If someone can help it's the Toshiba service provider. They have access to the database of Toshiba and can possibly help with these compatibility issues. I put t think a lot of people out there doing such experiments with upgrade of WLAN cards.

    If I m remembering that some people have tried, but later have been faced with various issues such as card not recognized or not able to be activated at all.

  • Satellite P750 - Wireless disconnects when wake the portable computer from the 'standby mode '.

    Hey

    Today, my Toshiba Satellite P750 (running Windows 7) has been disconnected from my wireless network when I wake from sleep mode. When I close the lid of my laptop, it goes automatically into mode 'sleep', and when I open it, I put my user password and use it as usual. However for some reason any today, it does not work.

    When I wake up, it recognizes my wireless network is available, however, cannot connect to it. When I solve the problem, it indicates that there is a problem with my router and I should turn it off, wait at least 10 seconds and then turn it back on. I tried this and it works fine, but my laptop has never done that (in the few weeks I got it) and I wouldn't constantly reset my router to use Internet. In addition, I have another laptop at home that works very well.

    Should be really this issue be resolved quickly as I have exams this week.

    See you soon

    Hello

    Maybe there is a problem affecting the IP automatically once the laptop has been in sleep mode. It could also be another reason for it but it of always difficult to say which could affect wireless networking

    I think you should try to update the Wlan driver.

    Don't know exactly what you have but here the card Wlan, you can find all the latest WLan drivers available for Toshiba laptops:
    http://APS2.toshiba-tro.de/WLAN/

    Uninstall the old drivers first, after new reboot install new drivers downloaded for the wireless network card that is built in Notepad.

  • How to use the adapter wireless Satellite C660D?

    Hello world!

    Crazy us looking for the adapter wireless Satellite C660D-164... is there an integrated? or do I have to buy an external? Can not know how to set up a wi - fi and bluetooth connection. The manual is not descriptive.

    Installed all the drivers form the site.

    Pleas help ASAP.

    As far as I know all the portable toshiba have too much especially the bluetooth and WIRELESS network card.
    Use of WLAN is very simply. Thing the most important ist wireless network adapter must be installed and activated correctly.

    In the document s user manuals, you can find good description how to use the WLAN.

    The question is: do you use your laptop with the original operating system preinstalled that you got with it or you use own preloaded?

  • Satellite P750 stops at the start of the 1st time but then works great 2nd time

    Hello
    My Satellite P750 always stops on the first time every day, but the 2nd boot works fine and no other problems...

    I press the Start button and it runs for maybe 10-20 seconds then stops... She does both on battery or power outlet...

    If I try to start again after that, it starts fine... sometimes, it gives the possibility to start in safe mode, or run the Startup Repair tool, but it always starts well and works normally...

    I tried to start repair when the option was given, and it is immaterial that the next day, he does the same thing again...

    Any advice appreciated, and Im a bit concerned that one day he did not start the second time...

    The laptop is only around the age of 6 months and otherwise runs great...

    Thank you

    Hello

    Recovery of the laptop back to factory settings.
    You use the Win 8 or Win 7 system?

    Usually, books Win 7 supports a HARD drive recovery by pressing F8-> fix my computer-> drive HARD recovery.

    If the same problem appears on the right after the system has been recovered, I guess there is a hardware problem and a technician must check the hardware parts.

  • Satellite P750 stops unexpectedly

    Hello

    I am the owner of a Satellite P750 and when I try and run index performance Windows or Grand theft auto 4 the laptop stops, no caveat comes never goes.

    Its driving me crazy.

    Hello

    Usually the laptop automatically stops due to hardware or software problem. This occurs to prevent material damage.
    But generally, this happens because of the high temperature.

    Have you noticed the temperature because of the game?

    Could the temperature goes up because of the dust or debris inside the cooling fans.
    In such cases its recommend to clean the fans and get rid of the dust and debris using a jet of compressed air. This tool is really nice and it helps you to clean up the cooling module.

  • Satellite P750-02R - put on by button / stop

    My part number Satellite P750-02R PSAY3A-02R001 used to power on/off button, but will only start up by pressing the Play/Pause button on the control panel above the keyboard media.

    I checked the BIOS to V1.90 and done a system restore. A ran diagnostics and no luck, the laptop turns off not via the power button, and if anyone has any ideas, I would be happy, otherwise, so I have to take it back to Toshiba because it is still under warranty.
    Thank you
    Bruce.

    Hey Buddy,

    I'm a little confused about your ad first, you wrote that you can t turn on your laptop via the Start button / stop and you must write m notebook turn off via the power button not / stop. This confusion of s

    Anyway, you should turn on your laptop if you press and hold the s computer power button for a couple seconds.

    If you want to turn off your laptop with this button, you must configure Windows power management. You can define an action for the s computer power button if the laptop would shut down, sleep, Hibernate, or nothing. Don t forget this must be set for each plan of power if you change them.

  • Satellite P750 - 02K - how to enable the wireless interface?

    Hello

    I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

    I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

    Any suggestions? Thank you.

    Hey Buddy,

    I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

    On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

    Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

  • After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help?

    I have a hp430 laptop with Windows 7 64 bit ultimate. After having a kind of pilot/virus that froze my computer, even once, I reinstalled my laptop with windows 7 64-bit ultimate.

    Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

    In Device Manager I see 4 devices linked to the internet wireless:

    1 > 1 other devices > network controller

    2 > pci device

    3 > pci simple communication controller

    4 > Sm bus controller

    -all the features above then have a yellow warning sign-the error is to have no driver installed.

    What should I do? How can I get my Wi - Fi to work again?

    I found a solution

    http://www.PCIDatabase.com/

    go through that link above just enter #ven in the name of the Salesperson box and #dev in the dev on search button vill box.click a list of devices .go through the device u pc download of the combination of this vill...

    for #ven and #dev, we need to click on 'network controller', which need drivers in Device Manager.

    Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

    We can get to the #ven and #dev of the first string you see in the window...

    hope this helps others...

  • Unable to connect to Internet wireless using the Galaxy Samsung SGH-I717 note.

    Original title: network

    Yes, I have all the products from Samsung, has everything to the computer screen one touch, a multifunction printer and a score of Galaxy (I717 GHS). My wireless network is with Dish Network. The computer and the printer works fine, but I cannot access my network wireless via my smartphone. I saw the control panel to display all installed devices but my wireless router is not displayed. When I try to access my network on my phone asking me to enter a password. When I type the router 8-digit number it says it is incorrect. What should I do?

    Hi Richard,

    Thanks for posting your question in the Microsoft Community.

     

    I would really appreciate if you could answer the following questions:

    1. what operating system is installed on your computer?

    Operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

     

    2. are you able to connect to the Internet wireless with another network?

    I suggest you to contact Samsung support to learn more.

    Contact Samsung Support:

     

    http://www.Samsung.com/us/support/contact

    http://www.Samsung.com/us/support/

    If you need further assistance on this topic, let know us and we will be happy to help you.

  • I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

    I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

    Hello

    1. what happens when you use a wired connection?

    2. how many devices are connected to the router?

    This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

     

    Hope this information is useful.

  • I can't connect to the Internet wirelessly

    I just replaced my wireless device and now I can't connect to the Internet wirelessly

    Hi JimMahoney,

    You have installed the necessary drivers for your new wireless device?

    You receive an error message when you try to connect to the internet using your router?

    What virus protection software is installed on your computer?

    I suggest you try the steps mentioned below.

    Method 1: Run the network troubleshooter utility in Windows 7.

    Please follow the steps below mentioned link to run the network troubleshooter utility

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    Method 2: You can also check the configuration of your new wireless device.

    Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

    I hope this helps.

  • Unable to connect to the Internet wireless

    I can't access the internet wireless.   There is a light on the wireless button.   the manual States it should be blue.   do I need to buy a part or is there something I can do to fix this problem manually.  for now, I connect to the internet using a cable connected to my router

    Original title: light on wireless button

    Hello

    To resolve wireless connection problems, see the following articles:

    Windows wireless and wired network connection problems

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

  • EA3500 issues related to Internet wireless

    Hello world

    We had trouble with our EA3500.  I spoke with tech support but could not afford it, so they sent me here.

    Our EA3500 works well, sometimes, not others.  It seems that there is a problem with the wireless internet signal.  For example, I can be reviewed online very well when I am connected to a LAN, but all of a sudden, internet wireless will cease to function without apparent reason, even if connected wireless devices must complete signals.  When this happens, all connected in LAN devices still work while those connected wireless are not.

    Until I finished the call with the Linksys tech support, they mentioned that I might need to update my firmware.  This could be the case.  I'm on a macbook pro 2007 at this time, and update Linksys program comes to about 88% complete and then informs me that the update failed.  Don't know what that means.

    Where should I go from here?  Any help would be appreciated.  I must also mention that we have a RE1000 about 50 feet away from the router, and I'm not sure if that plays in this.

    Thank you very much!

    Johnny

    Here is an example of good wireless definition for this router also, I recommend the classic firmware.

  • IE9 would freeze to the top and then my internet wireless receiver disconnects. Why is he doing this and how to fix it?

    I would be online and then it would freeze shortly after disconnects my internet wireless receiver and I don't have to connect again. But I don't think it's the wireless receiver since it is new.

    Hello

    1. have you made changes on the computer before this problem?

    2. What is the brand and model of the computer?

    3. do the Internet disconnected only when you use Internet Explorer or does it happen with all

    4. have you contacted your ISP on this issue?

    Method 1: You can temporarily disable the security software and check...

    Turn off the Antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: If this does not help, start the computer in safe mode with networking Mode and check.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If the Internet works fine in Safe Mode with network, then I suggest you to perform a clean boot and check if any third-party application is causing this problem.

    Put the computer to boot and check if you can play the game:
    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, place k the computer to boot to the normal startup.

    Method 3: If the problem only occurs when you use Internet Explorer, I suggest to optimize Internet Explorer and check.

    How to optimize Internet Explorer
    http://support.Microsoft.com/kb/936213/no
    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

     

Maybe you are looking for

  • Reconnect to DAQPad-6070E (fw) after powerloss

    I'm under Labview 8.2 with my DAQPad 6070E for continuous measurements. This configuration is tailor-made for about a year. At least once a month, all the facilities about, it is tested with the electric backup power for a few minutes. The laptop run

  • Save all source files in a project of earlier version?

    What is the quickest way to save all source files in a project from an earlier version? I know that I can do with individual files, but is there a way to do everything at once?

  • extension of volume on 2008 R2 space appears

    After you create a new logical drive and then extend the volume by using the disk management GUI additional space is not reflected in the console or the Explorer. However, when you view volumes in diskpart split volume shows all the space. The origin

  • Cannot send e-mail in Windows Mail

    Hello! I use Windows Mail (very old program and doddery I know) with a btinternet email address and I'm on vacation in Sweden (I live in England). I brought my laptop with me and I have Wifi at work on it, but Windows Mail will now only receive email

  • Create an EEM to find a port (mac address)

    Hello I´d like to create a script to find where an IP address is associated. Manually I can do it by using the command "show arp | in 10.10.10.50"(IP that I'm looking for), that give me the mac address, then I use the command"Display mac ad ad 4055.3